We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree

Fresatrici universali a mensola DMG MORI DMP 70

macchine per lavorazione dei metalli / fresatrici / Fresatrici universali a mensola

TOP
Seller

Fabbricante: DMG MORI

Modello:DMP 70

Tipo di macchina: Fresatrici universali a mensola

Numero di articolo: 168153711

Quantità: 1

Data: 10.12.2025

Luogo: Land-de Germania

Prezzo:


Seller-item-No.:051428


General
High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate
Working area 1
Longitudinal 700 mm
Cross 420 mm
Vertical 380 mm
Technical Data
Feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min


Main drive Drive power (100% DC) 6 kW
Drive power (40% DC) 8,5 kW
Torque (100% DC) 41 Nm
Clamping System ISO 7388-3 - JD30
Spindle taper BT 30
Speed range 20 - 10000 rpm
Torque (40% DC) 48 Nm
Integrated swivel rotary table simultaneous Integated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-ax
Rotary joint, 4 channels Rotary joint for integrated swivel rotary table with torque drives 4- channels, in Standard 2x for air, 2x for oil Including fix plate and fast coupling at machine rear side
Clamping pneumatic, one circuit Clamping pneumatic 1-circuit Including 2x 3/2 way valve
Tool magazine 25 places Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.6 sec
Production package band filter ICS 40bar Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Flushing in working room Spray gun for swarf removal
Air blast through spindle centre Air blast through spindle center via M-Command; maintained air with small Oil portion Due to needed lead through in main spindle only with swarf removal package ICS possible!
Preparation 3D Quickset Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
Signal lamp 4-colour Signal lamp, 4 colours
DMG MORI Interface PROFIBUS Right DMG MORI Interface PROFIBUS loading door at right machine side PROFIBUS communication between robot and machine for loading cycle 2 channel safety circuits Only in combination with an additional clamping method option!.
Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
Tropical package Package for tropical climate for ambient temperature max. 50°Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle
Special equipment RMS-Sensor
Workpiece loading & unloading system WH 3 CELL Workpiece loading & unloading system WH 3 CELL with 6-axis industrial robots and workpiece carrier storing system (paternoster); maximum possible workpiece weight of 3 kg, maximum workpiece size 100 x 100 x 50 mm Robot FANUC LR Mate 200 iD/7L PROFIBUS in
WH 3 CELL Integration kit for DMP 35/70 WH 3 CELL Integration kit for DMP 35/70 Machine-specific adaptation for the protective housing on one DMP 35/70
Dual gripper PGN 80 (without gripper fingers) Dual gripper Type Schunk PGN 80 with 8 mm travel per jaw (gripper fingers not included!)
Gripper system Schunk PGN-plus 80 Gripping device Schunk PGN-plus 80
Condividi questa macchina su Facebook:

Inchiesta

Commerciante di macchine?

Si prega di rimettere in opzione

Inviare la domanda desiderato?

Copia a voi?

Save input data


General
High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate
Working area 1
Longitudinal 700 mm
Cross 420 mm
Vertical 380 mm
Technical Data
Feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min


Main drive Drive power (100% DC) 6 kW
Drive power (40% DC) 8,5 kW
Torque (100% DC) 41 Nm
Clamping System ISO 7388-3 - JD30
Spindle taper BT 30
Speed range 20 - 10000 rpm
Torque (40% DC) 48 Nm
Integrated swivel rotary table simultaneous Integated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-ax
Rotary joint, 4 channels Rotary joint for integrated swivel rotary table with torque drives 4- channels, in Standard 2x for air, 2x for oil Including fix plate and fast coupling at machine rear side
Clamping pneumatic, one circuit Clamping pneumatic 1-circuit Including 2x 3/2 way valve
Tool magazine 25 places Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.6 sec
Production package band filter ICS 40bar Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Flushing in working room Spray gun for swarf removal
Air blast through spindle centre Air blast through spindle center via M-Command; maintained air with small Oil portion Due to needed lead through in main spindle only with swarf removal package ICS possible!
Preparation 3D Quickset Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
Signal lamp 4-colour Signal lamp, 4 D51252871 colours
DMG MORI Interface PROFIBUS Right DMG MORI Interface PROFIBUS loading door at right machine side PROFIBUS communication between robot and machine for loading cycle 2 channel safety circuits Only in combination with an additional clamping method option!.
Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
Tropical package Package for tropical climate for ambient temperature max. 50°Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle
Special equipment RMS-Sensor
Workpiece loading & unloading system WH 3 CELL Workpiece loading & unloading system WH 3 CELL with 6-axis industrial robots and workpiece carrier storing system (paternoster); maximum possible workpiece weight of 3 kg, maximum workpiece size 100 x 100 x 50 mm Robot FANUC LR Mate 200 iD/7L PROFIBUS in
WH 3 CELL Integration kit for DMP 35/70 WH 3 CELL Integration kit for DMP 35/70 Machine-specific adaptation for the protective housing on one DMP 35/70
Dual gripper PGN 80 (without gripper fingers) Dual gripper Type Schunk PGN 80 with 8 mm travel per jaw (gripper fingers not included!)
Gripper system Schunk PGN-plus 80 Gripping device Schunk PGN-plus 80

seller offer No. resale 051428
Condividi questa macchina su Facebook:
aggiungi alla lista selezionati
rivenditore
autorizzato

Venditore

logo dealer

DMG MORI Used Machines GmbH

Signora Kerstin Bauer
82538 Geretsried
Germany

RESALE membro dato che 2019


verified user
[ profilo del rivenditore ]
  • elenco macchine (158)
invia la richiesta
invia la richiesta

Inchiesta

Commerciante di macchine?

Si prega di rimettere in opzione

Inviare la domanda desiderato?

(a tutti i concessionari per una tale macchina)

Copia a voi?

(copia della richiesta sarà inviata al vostro indirizzo email)

Save input data

(Save input data for further inquiries)

di più DMG MORI DMP 70 + similar DMG MORI-Modello

2023 DMG MORIDMP-70
DMG MORIDMP 35
2022 DMG MORINLX 2500 Y / 700
2017 DMG MORINLX 2500 SY / 700
2022 DMG MORICMX 70U
2018 DMG MORINLX 2500 SY 700
2014 DMG MORINLX 2500 SY / 700
2019 DMG MORINLX 2500 SY/700
2020 DMG MORINLX 2500/700
2016 DMG MORIMilltap 700 41900 EUR

Prezzo: sold DMG MORI DMP 70 + simili DMG MORI-Modello

2016 DMG MORIMilltap 700 54900 EUR [Jul 2024]
2022 DMG MORICMX 70U 155000 EUR [Oct 2024]
2015 DMG MORIMilltap 700 90000 EUR [Mar 2017]