Escavatore montato Schaeff HT12 con secchio a retroescavatrice 60 cm con denti 1,25 t Dimensioni del trasporto Lunghezza 5,5 m x Larghezza 2,0 m Altezza 2,1 m Buone condizioni operative Prezzo netto dal sito € 2.400,-- netto Vendita dalla sede D - BL Sassonia-Anhalt Codice n. Q55

ID3881 JCB Hydradig 110W Anno/Baujahr 2018 6.300 ore/ore con Powertilt PTS 100 HS08, senza accessori con Power-Tilt PTS100 HS08, senza accessori

Engine: 4-cylinder turbo diesel engine, engine power: 140kW (190hp), drill mast: XL series, pullback force: 150kN, undercarriage: crawler undercarriage with 450mm wide rubber tracks, drilling drive: dual-head drilling gearbox. No known damage. Documentation available. Inspection possible by arrangement.

Max. speed: 20km/h, weight: ca. 19.4t, on-site inspection is possible.

ID3870 Terex TW85 Anno/Baujahr 2015 10.670 ore/ore 8,6 t Accoppiatore rapido, 2 secchi per scavare Accoppiatore rapido, 2 secchi per retroescavatrice

SPECIFICHE TECNICHE Produttore: August Ridinger Mannheim Designazione: Sistema di presa galleggiante Progetto: Escavatore a pinza con corpo a gancio Tipo: SG26Ksp Anno di produzione: 1972 Revisione generale: 2015 Rinnovo della cabina di sterzo: 2015 Rinnovo dei tamburi a corda: 2002 Volume della pinza: 2,6 cbm Tipo di presa a conchiglia: Presa a conchiglia a quattro corde, meccanica a corda Capacità totale di presa: 9 t Profondità massima di dragaggio: 50 m sott'acqua Portata: circa 75 cbm/h (circa 120 t/h) Alimentazione: Cavo di alimentazione tramite linea di cintura Potenza nominale: 400V/630kVA Separazione grossolana: griglia inclinabile della barra, idraulica Drenaggio: macchina per la schermatura a 2 ponti, con doccia Numero di verricelli di ormeggio: 4 pezzi. Numero di nastri di scarica: 1 pezzo. Lunghezza totale: 26.200 mm Lunghezza totale del pontone: 18 ...

Chain pipe wrench, pipe chain wrench, chain pipe wrench, chain wrench, chain pliers, pipe clamping system, pipe welding machine, pipe assembly device -Chain wrench: Pipe chain wrench type No. 35 -Length: 1260 mm -Dimensions: 1260/150/H110 mm -Weight: 5.7 kg

Chain pipe wrench, pipe chain wrench, chain pipe wrench, chain wrench, chain pliers, pipe clamping system, pipe welding machine, pipe assembly device -Chain wrench: Pipe chain wrench type No. 3 -Length: 800 mm -Dimensions: 800/100/H60 mm -Weight: 5.7 kg

Max. lifting capacity: 2000kg, radius/lifting capacity: 20m/1000kg or 24m/650kg, hook height: 18m, max. hoisting speed: 45m/min, slewing speed: 1rpm, trolley travel speed: 30m/min, rail travel speed: 25m/min, slewing radius: 2.74m, support width: 4m, counterweight ballast: 9800kg, hoisting class: H1, load group: B3. Documentation available. An on-site inspection is possible.

Base plate, site fence base, barrier base-Footplates: made of concrete, 19 pieces-Intake: 6x Ø 45 mm-Price/delivery: complete-Dimensions: 620/220/H130 mm respectively-Weight 33kg/pc-Total weight: 627 kg

ID3833 Schaeff HML32 Anno/Anno di costruzione 2004 7.320 ore/ore 9,5 t Braccio regolabile, braccio articolato, lama bulldozer, 2 secchi Braccio regolabile, Knickmatic, Lama, 2 Secchi

Operating hours: approx. 1550h, displacement: 6728cm³, power: 107kW, total weight: 16.5t. Including winch, work platform, high-pressure hose with reel, forks and lattice boom extension. A new rotary union is available as a spare part. An on-site inspection is possible.

Atlas 1602 Portapezzi di ricambio Produttore: Atlas Tipo: 1602 E 2 pezzi in magazzino 1602 D e 1602 E Posizione: 30900 Wedemark Vendita privata come vettore di ricambi Prezzo 2.900,-- euro Cucchiai e pinze a costo aggiuntivo Incluso aiuto per il caricamento.

ID3853 Caterpillar 318D MH Anno/Baujahr 2012 14.000 ore/ore Modulatore materiale, cabina sollevabile, 4 bilanciatori, pneumatici in gomma massiccio, con aggancio rapido SMP, opzionale per la presa per lo smistamento Modulatore materiale, cabina rialzante, 4 cavalletti, pneumatici in gomma massiccio, con gancio rapido SMP, pinza di stiramento opzionale

Theodolite tripod, theodolite stand, measuring rack, support stand, mounting stand, steel stand -Tripod: for theodolite, solid construction, laterally adjustable -Height adjustable: 1005-1420 mm -Platform: 120 x 120 mm, mounting diameter 34.5/20 mm -Quantity: 1x tripod available -Transport dimensions: 720/600/H1285 mm -Weight: 101 kg

Theodolite tripod, theodolite stand, measuring rack, support stand, mounting stand, steel stand -Tripod: for theodolite, solid construction, laterally adjustable -Height adjustable: 1005-1420 mm -Platform: 125 x 125 mm, mounting diameter 34.5/20 mm -Number: 1 tripod available -Transport dimensions: 700/610/H1005 mm -Weight: 89 kg

An Airo scissor lift is offered. Working height: 12200mm, platform height: 10200mm, platform extension: 1500mm, load capacity: 450kg, drive: diesel, configuration: 4×4 with outriggers. Machine dimensions X/Y/Z: 2970mm/1700mm/2490mm, weight: approx. 3200kg. An on-site inspection is possible.

Sono disponibili due macchine costruite su misura per la produzione automatica di pannelli di piastrelle pre-riversati. Materiale di adesione: stucca in PU a due componenti, capacità massima di produzione: circa 50 m²/h, formato minimo delle piastrelle: 97mm/97mm, formato massimo delle piastrelle: 197mm/197mm, formato piastra divisori: 244mm/119mm. Si tratta di una linea di produzione completa fino alla fase di confezionamento. I tubi in PU si sono intasati dopo un lungo periodo di tempo e devono essere sostituiti. Inclusi vari pezzi di ricambio. Documentazione disponibile. È possibile un'ispezione in loco.

Excavators, track widening for excavators, wheel spacers -Manufacturer: Eurorubber, track widening for excavators -Part No.: ZR804550 -Material: Rubber -Dimensions: see photos / technical drawing -Suitable for various excavator models -Dimensions: Ø 820 x 65 mm -Weight: 31 kg

A Wacker Neuson wheel loader, ideally suited for agricultural purposes, is available. Engine: Deutz TD 2.9 L4 S5, Power: 61hp/45kW, Displacement: 2900cm³, Emission standard: Stage V, Exhaust aftertreatment: DOC/DPF, Max. engine speed: 2300rpm, Max. tipping load: 3300kg, Standard bucket capacity: 0.8m³, Max. working hydraulic pressure: 220bar, Max. travel hydraulic pressure: 450bar, Fuel tank: 82l, Kinematics: Z, Articulation angle: 44°, Oscillation angle: +/-12°, Max. dump height: 2430mm, Lifting force: 41.36kN, Outside turning radius: 3870mm, Tires: 405/70 R20. Transport dimensions X/Y/Z: approx. 4800mm/1850mm/2550mm, Operating weight: approx. 4600kg, Operating hours: approx. 1382h. Including 1200mm pallet forks, FEM II rotating fork positioner, road approval and hydraulic Z-HV quick coupler. The engine or the control system of the windshield washer system has a defect. Documentatio ...

Orari di esercizio: 4280h, Larghezza delle scarpette dei binari: 550mm, Scartamento dei binari: 1520mm, Lunghezza del contatto dei binari: 2090mm, Lunghezza del carrello: 2080mm, Larghezza della lama: 3000mm, Dimensioni della macchina X/Y/Z: circa 52050mm/1900mm/1850mm, Peso: circa 10000kg. È possibile un'ispezione in loco.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece

Theodolite tripod, theodolite stand, measuring rack, support stand, assembly stand, steel stand, welding table, assembly table, support stands, support feet, work stand, Vinten, heavy-duty tripod -Manufacturer: Spectra-Physics, tripod -Type: 950 -Stroke: 450 mm -Height: max. 2345 mm -Hole: Ø 89 mm -Transport dimensions: 2230/330/H220 mm -Weight: 14.4 kg

A combined sanitary container unit, consisting of two containers, presumably of the Czech make Moravia Containers or Containex, is available. Container exterior dimensions X/Y/Z: approx. 6060mm/2440mm/2840mm, interior height: 2500mm, protective primer: epoxy, insulation: mineral wool, floor traffic load: 2500N/m², exterior sheet metal thickness: 0.5mm, corrugation depth: 10mm, urinal: 6, cubicles: 6, washbasins: 5, electric heating convectors: 2, under-sink units: 5. The unit is designed for simple and quick disassembly and reassembly. The two containers must be separated during transport. Documentation available. An on-site inspection is possible.

ID3798 Wacker Neuson EZ80 Anno/Anno di costruzione 2022 1530 ore/ore 8,4 t Lama, cingolo in gomma da 450 mm, terzo circuito di controllo, pompa di rifornimento diesel, accoppiatore rapido idraulico, 3 secchi Scudo, cingolo in gomma da 450 mm, 3° circuito di controllo, pompa di rifornimento diesel, hydr. Accoppiatore rapido, 3 secchi

A hydraulic system, consisting of three identical power units and three identical hydraulic hammers including lines, is available. 1) 3x hydraulic power unit Atlas Copco LP 9-20 P, engine manufacturer: Honda, engine power: 6.7kW, fuel: gasoline, max. operating pressure: 150bar, return filter fineness: 25µm, machine dimensions X/Y/Z: approx. 650mm/550mm/650mm, weight: approx. 80kg. 2) 3x hydraulic, vibration-damped breakers Atlas Copco LH 190 E, year of manufacture: 2014, operating pressure range: 95bar-110bar, blow frequency: 1400/min, vibration value: approx. 5m/s², max. back pressure: 10bar, length: approx. 650mm, operating weight: 25kg. 3) Hydraulic hose lines. An on-site inspection is possible.

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Type: 7.00-12 Rim 5.00 S-12 532/271 -Rim: for dual tires -Bolt circle: Ø 205 x 20 mm -Hub bore: Ø 160 mm -Price/Fee: complete -Dimensions each: Ø 580 x 280 mm -Weight: 56 kg/piece