fresatrici legno usati in vendita (629)

Unità CNC per foratura e fresatura Marchio: Atemag Tipo: Linea Funzione Extra con due interfacce utensile angolo 90 Velocità massima di marcia: 10.000 R.P.M. Velocità massima del mandrino dell'utensile 15.000 giri/min Rapporto di trasmissione i = 1:1,5 Direzione di svolta a sinistra/destra Coppia massima 20 Nm Interfacce degli strumenti: ER 32 / ER 16 Fuso per router omega/ER 16

Unità CNC per la taccatura degli angoli nella progettazione a offset Marchio: Atemag Tipo: Linea Funzionale Extra 2 Velocità massima di marcia: 8.000 giri/min. Velocità massima del mandrino dell'utensile 12.000 giri/min Rapporto di trasmissione i = 1:1,48 Direzione di svolta a sinistra/destra Coppia massima 20 Nm Interfaccia strumento: Speciale Attenzione: il prezzo è valido solo per la versione standard

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed

Drilling- cutting machine Brand: Comec Type: Frontal 2 CN New machine Drawer parts machining in compact design Fast set-up for the smallest possible batch sizes thanks to CNC technology - Perfect machining The FRONTAL CN is ideally equipped for the machining of drawer parts and can be optionally equipped with drilling units from above, but also laterally, e.g. for drawer side parts. The drilling units at the top are suspended at the front of the upper beam so that a grooving saw unit can be mounted at the rear, for example, for drawing in top grooves. The machines can be equipped either with manual feeding or with automatic feeding magazine, so that the machines can work in continuous operation. For larger batch sizes, the FRONTAL is also available as a BASIC machine with conventional control.

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type DUO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

Unità CNC per foratura, fresatura e segatura Marchio: Atemag Tipo: Ultra Line Vario Viso Regolazione dell'angolo 2 x 0 - 100 su due lati regolabile Velocità massima di marcia: 13,760 giri/min. Velocità massima del mandrino dell'utensile 15.000 giri/min Rapporto di trasmissione i = 1:1,09 Direzione di svolta a sinistra/destra Coppia massima 22 Nm Interfacce utensile: combinazione ER 25 e sega, flange della lama della sega 30 mm, cerchio di passo 45mm e 52mm

Unità CNC per stampatura o pacchetto per lame di sega Marchio: Atemag Tipo: Ultra Line Mega Cutter Posizione del mandrino utensile 90 Velocità massima di marcia: 12.000 R.P.M. Velocità massima del mandrino dell'utensile 7,690 R.P.M. Rapporto di trasmissione i = 1:0.641 Direzione di svolta a sinistra/destra Coppia massima 22 Nm Interfacce utensili: pergole con diametro 30mm, lunghezza di serraggio 120, diametro massimo utensile 160mm - senza attrezzi -

CNC frame processing machine Brand: COMEC DRIVER New machine - With this machine you can process assembled door frames in quantity-1, door by door. - 5-axis machining spindle with ingenious crosshead technology for fastest tool use and productivity. Automatische Positionierung der Auflagensupporte. - High-precision and program-controlled clamping system with O-reference on the surface. - Laser measurement of the surface contours for precisely fitting milled fittings. - Automatic discharge of the finished frame parts. - Possibility of connection to known door software systems. - The machine can be individually designed to meet your required machining needs. Give us your requirements and let us offer you your MD JAMB suitable. - This offer is valid for Germany. Wehrmann is the exclusive sales and service partner for COMEC in Germany.

max. workpiece length: 6360 mmprofile spindle: 1 Stückmain drive: 13 kWControl: CNC SCM CNC Machining Center ACCORD 40 FX for windows and doors---------------------------------------------------INCLUDES extensive window and door toolingamong others (window cutting available upon request!):Wooden windows IV 68, 78, 92Wooden style windowsWood-aluminum windowsFront doorsLift-and-slide doorsBox windowsMachine still in operation, available for viewing!Technical Summary (detailed description available upon request!):---------------------------------------------------- Working area X-Y = 6360 x 1905 Z = 350- Automatic table with 8 support rails MATIC - L1825- 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW- RTCP Setting - Self-calibration system for Prisma work unit- Adjustable chip removal device on the electric spindle- Preparation for Prisma T-S angle gearbox- BRC - Working unit: Saw blade  ...

work table:: 905x770 mmcolumn arm: 915 mmWeight: 650 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of milling agregates: 1 St.Motor output: 5,5 kWSpeed: 10000/20000 U/min.weight of the machine ca.: 650 kgYear: 1978 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Peso: 120 kg Lunghezza: 800 mm Larghezza: 600 mm Altezza residua di fresatrici nuove e usate con canna, fresatori, trapani, trapani a perno, inserti e vari altri taglioni. Produttore: Leitz, Leuco, Oppold e molti altri. Interessanti per ogni stanza di affilatura ben attrezzata. I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

travel -x axis: - mmtravel -y axis: - mmtravel -z axis: - mmB-axis swival range +/-: -90° / +12 °C-axis: 360 °control: HEIDENHAIN - Millplus number of spindle speeds: 12.000 U/minnumbers of positions in the tool changer: 60 tool taper: SK40 NC rotary table diameter: 600 mmfixed clamping table: 1.000 x 600 mmmax. table load: 500 kg5-axis simultaneous machining center | DMG - DMU 60 monoBlock equipped with ITC (40bar), a 60-way tool changer, NC - rotary table, Renishaw measuring probe and chip conveyor.Additional equipment information:- NC swivelling head B-axis- NC rotary table C-axis integrated in the fixed table- Direct position measuring system in X/Y/Z (glass scales) - Extraction system - 3D Quickset - Handwheel HR 410 The machine is in a well-maintained condition and can be inspected at any time under power.The machine video from the production plant will be shared on request.- - ...

travel -x axis: 500 mmtravel -y axis: 450 mmtravel -z axis: 400 mmc-axis: 360 b-axis: 0 - 108 °surface area: d: 500 x 380 mmcontrol: HEIDENHAIN - iTNC530 number of spindle speeds: 20 - 18.000 U/minnumbers of positions in the tool changer: 60 tool taper: HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor.Additional equipment:- Infrared probing system Heidenhain TS 640- Laser tool measurement system- Belt filter systemThe machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DMU50Evo | DMU50 Evo | 50EvoThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Haberkorn, Type: FZS-SD, Year: 1994, Work piece width min-max mm: oben, Min.-max. workpiece length in mm: 400, Min.-max. workpiece height in mm: 3, Trimming saw: 2800, Working hight mm: 252, Vertikal spindle: 40, Working range Z-axis mm: 220, Length lifting spindle mm: 1, Diameter of the spindle mm: 40, Trimming saw: 2800, Travels of spindle: 2, Milling spindle kW: +/- 65 °, Working length max mm: ca. 7,5 Fräswelle, Max. working depth in mm: 2000, Main engine kW: yes, Feeding speed max m/min: yes, Feeding - manually: 2 Druckluft-Spanner, Feeding speed continous adjustable: 1x100 + 1x 180, Mitre Window: 2225x1720x1835, Year :1994

Manufacturer: Homag, Type: FL 20/07/15/S, Year: 2003, Destacking plant: PC 21, Vereinzelung: Woodline, Software: yes, Maschinensteuerung: 220 - 1500, Machine no 1: 220, Motore Maschine 1: 8 - 90, Machine 2: yes, Motore Maschine 2: 500, Kantenversiegelung: 10- 40, Conveyor: yes, Trittschal: max 110, Einlegstattion in Kartons: 25 mm, Min.-max. workpiece height in mm: 11, Working width min-max mm: yes, Working hight min-max mm: 6,6, Machine with controlled dogs: yes, Cam distance mm: 6,6, Feeding speed min-max m/min: yes, Feed stepless: 11, Min-max protrusion of workpiece mm: yes, 3 Engine power kW: Mittelschnitflasch Arbeitsbreite 300 - 500 mm, Year :2003

Manufacturer: Homag, Type: FL 20/06/30/S, Year: 1995, Maschinensteuerung: Homatic, Machine no 1: Quermaschine, Motore Maschine 1: 5, Magazine: yes, Conveyor: Kette, Work piece width min-max mm: ca.220, Min.-max. workpiece length in mm: 220-3000, Min.-max. workpiece height in mm: 10-40, Machine with controlled dogs: yes, Cam distance mm: ca.400, Feeding speed min-max m/min: 6-40, Feed stepless: yes, verängerte Kette mm: yes, Nockenaushebung: no, Magazine: yes, Overall milling units: 10, Moulding units swivel-mounted: 5+5, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 6,6/5800, 1. swivelling controllable: schwenkbar, 2nd milling unit kW / rpm: 6,6/5800, 2. swivelling controllable: schwenkbar, 3rd milling unit kW / rpm: 6,6/5800, 3. swivelling controllable: schwenkbar, 4th milling unit kW / rpm: 6,6/5800, 4. swivelling controllable: schwenkbar, 5th milling unit kW / rpm: Freipl ...

Manufacturer: Homag , Type: Power FR 20/09/15/L/Q1, Year: 2007, Control: Powercontrol Homag, Conveyor: Nockenkette, Work piece width min-max mm: 350, Min.-max. workpiece length in mm: 220-1500, Min.-max. workpiece height in mm: 10-30, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: ca.60, Feed stepless: yes, verängerte Kette mm: yes, Overall milling units: 5, Moulding units swivel-mounted: 5, gesteuerte Fräsaggregate: keine, 1st milling unit kW / rpm: 6,6/5850, 1. swivelling controllable: yes, 2nd milling unit kW / rpm: 6,6/5850, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 6,6/5850, 3. swivelling controllable: yes, 4th milling unit kW / rpm: 6,6/5850, 4. swivelling controllable: yes, 5th milling unit kW / rpm: 6,6/5850, 5. swivelling controllable: yes, Year :2007

Manufacturer: Haberkorn, Type: FZS-SD, Year: 1994, Work piece width min-max mm: oben, Min.-max. workpiece length in mm: 400, Min.-max. workpiece height in mm: 3, Trimming saw: 2800, Working hight mm: 252, Vertikal spindle: 40, Working range Z-axis mm: 220, Length lifting spindle mm: 1, Diameter of the spindle mm: 40, Trimming saw: 2800, Travels of spindle: 2, Milling spindle kW: +/- 65 °, Working length max mm: ca. 7,5 Fräswelle, Max. working depth in mm: 2000, Main engine kW: yes, Feeding speed max m/min: yes, Feeding - manually: 2 Druckluft-Spanner, Feeding speed continous adjustable: 1x100 + 1x 180, Mitre Window: 2225x1720x1835, Year :1994

Manufacturer: Weinig Unicontrol, Type: Unicontrol 10, Year: 1999, Control: Weinig/Siemens, Controlled lenght stopper: yes, Trimming saw: yes, Studioeinrichtung Winkel: no, Automatisierungspaket: yes, Doppelteilpaket: yes, Elektrischer Längenanschlag bis mm: 3600, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400/320, Length of tenoning spindle mm: 640, Tool travel range tenoning spindle: für 8 Werkzeuge, Schlitzspindel Motorleistung kW: 7,5, Moulding spindles: 3, Länge Profilspindel mm: 320 X 50, 1 length of profile spindle in mm: 320, 1Engine power kW: 5,5, 2 length of profile spindle in mm: 320 X 50, 2 spindle lift in mm: 320, 2 Engine power kW: 5,5, 3 Länge Profilspindel mm: Profilfräsaggregat vertikal, 3 Engine power kW: 2,2, Diameter of the spindle mm: 50, Fly circle moulding tool mm: 320, Fly circle tenoning tool: 400, Constant  ...

Manufacturer: Torwegge, Type: 8010, Year: 1998, Maschinensteuerung: yes, Motore Maschine 1: 4 +4, Conveyor: 1 Kettenmaschine, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 6-30, Working width min-max mm: 80, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: 10-40, Feed stepless: yes, Overall milling units: 4+4, Moulding units swivel-mounted: 4+4, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 4,5/5800, 2nd milling unit kW / rpm: 4,5/5800, 3rd milling unit kW / rpm: 4,5/5800, 4th milling unit kW / rpm: 4,5/5800, Year :1998

Manufacturer: Weinig, Type: Unicotrol 10-5, Year: 1992, Control: Siemens/weinig, Min.-max. workpiece height in mm: max.100 mm, Controlled lenght stopper: yes, Trimming saw: yes, 4-fach Konterholz: yes, Studioeinrichtung Winkel: yes, Automatisierungspaket: yes, Doppelteilpaket: yes, Unitecspindel: yes, Beschlagfräseinheit: yes, Nutspindel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400, Tool travel range tenoning spindle: 6 X 85/7 Werkzeuge, Länge Profilspindel mm: 3, 1 spindle lift in mm: 2 X 95/3 Werkzeuge, 1Engine power kW: 2 x 95, 2 length of profile spindle in mm: 11, 2 spindle lift in mm: 3 X 75/4 Werkzeuge, 2 Engine power kW: 3 X 75, 3 Länge Profilspindel mm: 11, Diameter of the spindle mm: 3 kw, Diameter of the spindle mm: 50, Feed stepless: 6-12, Total power kW: yes, Required space L x W x H mm: 10, Year :1992