Filtri vari GEA PROCESS membrane nanofiltration unit up to 6.25 m³/h - Mis

General SKULX003 LocationBarneveld MakeGea Process No.VF-75-12-04374 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel Filtercheck Information Extra SpecificationsGEA membrane nanofiltration unit up to 6.25 m³/h, in very good condition and hardly used. This unit was only used for two validation batches and then stored.  : The complete original manufacturers documentation is included in digital format. It includes the operating manual, process flow diagrams, circuit diagrams, certificates, test reports and other relevant technical documentation. Spiral membranes. The system is designed to process a maximum volume of approx. 100 m³ of product (feed) per day. An average feed flow rate of approx. 4 to 6 m³/h in operating mode 16/4” or 20/4” is assumed (explanation: 20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning).  : If the daily treatment capacity needs to be increased at a later date or the installed membrane area is no longer sufficient due to unforeseeable fouling effects, two empty spaces are provided for retrofitting additional membrane housings. The piping and the recirculation pump are already prepared for such an extension.  : The nanofiltration system is designed for a semi-automatic cleaning-in-place (CIP) process. The system contains the necessary valves for the internal circulation of cleaning solutions and subsequent system rinsing.  : Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C  : Power consumption: - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW Citjneo9S - Electrical power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Sealing water: approx. 75 - 150 l/h - CIP water: approx. 19 F5952068 m³/h - CIP water per F5952068 cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g. membrane cleaner, acid, alkali, preservative, biocide)  : Limit values - Max. Max. operating temperature: 65 °C - Max. Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0  : Cleaning in place (CIP) - Max. Temperature: 85 °C - Max. Pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0 Miscellaneous filtersGEA ProcessFilters > Miscellaneous filtersBrand > GEA Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
seller offer No. resale LX003