saldatrici usati in vendita

: neu : ca. 2 - 4 Wochen ab Auftr : 2022 €: 1500 x 1000 mm: 3000 kg: 272 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,1500 x 1000 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...

: neu : ca. 6-8 Wochen ab Auftrag : 10265 €: 197.09 €: 4000 x 2000 mm: 850 mm: 8000 kg: 712 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (stand ...

: neu : ca. 2 - 4 Wochen ab Auftr : 449 €: 16 mmCarrello portautensili per accessori sistema da 16 mm, mobileGli utensili non sono inclusi nel prezzo. I dati di questo annuncio sono stati creati con ModulMWS, la soluzione software di LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 3695 €: 2400 x 1200 mm: 3000 kg: 482 kg: 200 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2400 x 1200 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid st ...

: neu : ca. 2 - 4 Wochen ab Auftr : 929 €: 16 mmStarter set for anyone who wants to work professionally and efficiently contains the most important tools as basic equipment.Consisting of:4 pieces screw clamp 180° HIS16Z30004 pieces stop bracket 90x37.5mm HIS16WA90374 pieces stop bracket 90x90mm HIS16WA90904 pieces stop bar 115mm HIS16FA11512 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS-Cleaner-1L1 piece anti-adhesive agent HIS-Premium-1LOPTION:Tool trolley HIS16WW1000 € 449,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : 1190 €: 1000 x 1000 mm: 850 mm: 450 kg: 25 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capa ...

: neu : 2486 : prompt, Zwischenverkauf v : 545 €: 1 : 28 mmGli utensili non sono inclusi nel prezzo. I dati di questo annuncio sono stati creati con ModulMWS, la soluzione software di LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight of the machine ca.: ca. 577 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

corrente di saldatura: 20 - 100 Acapacità di taglio: max. 35 mm mmtensione a circuito aperto: 250 VRpressione dell'aria compressa: min. 4 barcarico collegato: 20 KVAfrequenza di carico collegato: 400 Vpeso: 0,7 kgDimensioni (LxPxA): 1,0 x 0,6 x 0,8 mmMacchina per il taglio al plasma con carrello- Include pacchetto di tubi flessibili da 7 m- Ugelli di ricambioI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

corrente di saldatura: 30 - 100 Acapacità di taglio: max. 50 mm mmtensione a circuito aperto: 170 VRpressione dell'aria richiesta: min. 4 barcarico collegato: kWfrequenza di carico collegato: 400 Vpeso: 0,75 kgDimensioni (LxPxA): 1,2 x 0,7 x 1,0 mmMacchina per il taglio al plasma con carrello- Torcia 105 RTX- Include un pacchetto di tubi flessibili da 7 m- Ugelli di ricambio- Come nuovo, pronto per l'uso immediatoI dati di questo annuncio sono stati creati con ModulMWS, la soluzione software di LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 995 €: 1200 x 800 mm: 150 kg: 16 mmTHIS MODEL IS DESIGNED FOR BEGINNERS AND FOR PROCESSING LIGHTER AND SMALLER WORKPIECES.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.2D standard welding and clamping table,1200 x 1200 with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid standard table legs with load capacity 1 tonne per leg, 500 kg per leg for castor modelThe data for this ad ...

: neu : ca. 2 Wochen ab Auftragse : 5442 €: 105.03 €: 28 mmAccessory set consisting of:14 pcs. screw clamp180° HIS28Z30008 pcs. screw clamp45° HIS28Z30456 pcs. V-support HIS28VP10030 pcs. quick clamping bolt shortHIS28SB1006 pcs. connection bolt HIS28BS1004 pcs. mangnetic bolt HIS28MB1008 pcs. stop rail 150mm HIS28FA1508 pcs. stop rail 225mm HIS28FA2252 pcs. stop rail 500mm HIS28FA5006 pcs. stop angle 175mm HIS28WA1751 pc. stop angle 325mm HIS28WA325L1 pc. stop angle 325mm HIS28WA325R1 pc. support angle 600mm HIS28W600L1 pc. support angle 600mm HIS28W600R1 pc. support angle 800mm HIS28W800L1 pc. support angle 800mm HIS28W800R1 pc. cleaning brush Nylon HIS28RB1 pc. torch holder HIS28BH1 pc. tool cart HIS28WW1000and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : 1490 €: 1500 x 1000 mm: 850 mm: 344 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capacity 50 ...

: neu : ca. 10 Wochen ab Auftrags : 4862 €: 3000 x 1500 mm: 755 kg: 200 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,3000 x 1500 x 200 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid stan ...

: neu : ca. 6-8 Wochen ab Auftrag : 6400 €: 123.52 €: 3000 x 1500 mm: 850 mm: 8000 kg: 1544 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (stand ...

table length: 2400 mmtable width: 1200 mmtable height: mm: 4000 kgheight of stroke: 510 - 1550 mmtotal connected load: 1,5 kWconnected load frequency: 400 Vweight of the machine ca.: 0.95 tWelding table on lifting table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmRibbed bottom for reinforcement.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : 4400 €: 2400 x 1200 mm: 850 mm: 8000 kg: 945 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height-adjustabl ...

capacità volumetrica: 1200 mc/hpotenza totale richiesta: 0,75 kWpeso della macchina ca.: 115 kgdimensioni della macchina ca.: 0,65 x 0,70 x 2,00 mNumero di serie: 930918I dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

table length: 3000 mmtable width: 1750 mmtable height: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1800 mmtable width: 1300 mmtable height: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: . mmheight: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: 13,10 kVAnumber of controlled axis: 6 Payload: 16,00 kgRobot: REIS - SRV16L A1 - axis: 120 °A2 - axis: 195 °A3 - axis: 270 °A4 - axis: 360 °A5 - axis: 246 °A6 - axis: 720 °Welding manipulator: REIS - RDS26 workpiece weight: 2.600 kgRotating speeds: 50 °/sek.table rotating: 360 °table swivelling +/-: 180 Gradslewing speed: 15 °/sek.welding unit: FRONIUS wire dia.: 0,80 - 1,60 mmWire speed: 0,50 - 22,00 m/minControl: total power requirement: 20,00 kWweight of the machine ca.: 18,00 tdimensions of the machine ca.: 10,00 x 4,00 H4,00 m2-station welding cell with- REIS SRV16L vertical articulated arm welding robot- RobotStar V control unit- 2x REIS RDS26 welding turntable- Welder FRONIUS TransPulsSynergic 5000 with cooling unit- Wire-feed-unit FRONIUS 4R/W/E RoboterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro del pezzo: / mmmateriale: acciaio inossidabile/resistente al calore: / processo di saldatura: 15-20 bulloni /min a: / mmpotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

number: 70 Positionenweight: 90 kgcondition: neu : 28 mmWMT Set 7: 70-piece, 28mm system, consisting of:3x Pipe clamps D28 90° – Item No. 40283973x Pipe clamps D28 180° – Item No. 40283963x Pipe clamps D28 45° – Item No. 40283983x Pipe clamps D28 300x150 – Item No. 40283993x Pipe clamps D28 300x200 – Item No. 402840015x Ball lock pins D28x50 – Item No. 402766310x Locking pins D28x80 – Item No. 40288764x Universal Stop D28 100x50x25 mm – Item No. 40284694x Universal Stop D28 150x50x25 mm – Item No. 40284704x Universal Stop D28 225x50x25 mm – Item No. 40276572x Universal Stop D28 300x50x25 mm – Item No. 40276592x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 40286572x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 40286582x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 40286492x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 40286522x Stop ...

: neu : ca. 4 Wochen ab Auftragse : 2860 €: 1500 x 1000 mm: 850 mm: 8000 kg: 541 kg: 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height-adjustab ...

intensità di corrente: 200 Acapacità al 100% del carico: 150 A: 230 V: kVApeso della macchina ca.: 9,0 tdimensioni della macchina ca.: 0,46 x 0,15 x 0,32 mSistema di saldatura TIG- Nuovo- Pacchetto di tubi flessibili da 3 m- Pacchetto di tubi flessibili aggiuntivo da 8 m- Cavo di terra- Tubo di collegamento del gas- DocumentazioneI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

intensità di corrente: 300 Acapacità al 100% del carico: 200 A: 400 V: 6,6 kVApeso della macchina ca.: 95 tdimensioni della macchina ca.: 0,8 x 0,6 x 0,65 mAC/DC Sistema di saldatura TIG raffreddato ad acquaPacchetto di tubi flessibili da 3 mRegolatore di pressionePronto per l'usoI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.