Used Tetra Pak A3 flex 500-1000ml SQ 300V Filling TETRA PAK® A3/Flex 300V

Used Tetra Pak A3 flex 500-1000ml SQ 300V Filling lineTechnical Specifications & Performance DataThe Tetra Pak A3/Flex 300V is a used bottling line filling machine designed for aseptic carton packaging applications. Built for industrial packaging and beverage production, this filling machine forms, sterilizes and fills carton packs in an integrated production process. Capacity reaches 8,000 p/h for package sizes below 330 ml, 7,000 p/h for sizes above 330 ml, 5,500 p/h for packages above 1,500 ml, and 5,000 p/h for 1,890/2,000 ml packages.Manufacturer: Tetra PakModel: A3/Flex 300VMachin working hour: 16.566 HoursMaximum output: 8,000 p/hElectrical supply: 400/230 V ±10%Frequency: 50/60 Hz ±2%Recommended main fuse: 100 A, or 160 A with DIMC FlexMachine body height: 3,621 mmStandard width: 7,225 mmPT Flex length: 8,327 mmAdvanced Automation & Control SystemsThis Tetra Pak filling machine integrates controlled heat sterilization functions for pre-heating, spraying and drying, together with tube sealing, production and cleaning modes. Power consumption varies by operating phase, including 7.7 kW for tube sealing, 32.9 kW for heat sterilization pre-heating, 26.9 kW for heat sterilization spraying, 23.9 kW for heat sterilization drying and 27.6 kW during production. The PT Flex configuration has corresponding operating loads of 9.3 kW, 33.8 kW, 27.4 kW, 24.2 kW and 29.7 kW.The machine operates on a 400/230 V electrical supply at 50/60 Hz. Integrated cleaning functionality supports hygienic operation, while the stated environmental operating range is 5 °C to 40 °C, with a recommended ambient temperature of 15–30 °C.Production Line Integration CapabilitiesDesigned as a core aseptic carton filling machine, the A3/Flex 300V can be integrated into a complete industrial packaging line with downstream conveyors, accumulation systems, coding equipment and secondary packaging machinery. Its production capacity range supports different carton pack sizes, from formats below 330 ml through larger 1,890/2,000 ml packs.Machine TypeManufacturer / ModelFilling MachineTetra Pak A3/Flex 300VProduct supply requires a connection pressure of 70–250 kPa. The system can be connected to compressed air, cooling water, ice water, steam and cleaning media services appropriate for aseptic filling operations.Machine Condition & Maintenance HistoryThis second hand Tetra Pak A3/Flex 300V filling machine is presented as used bottling and packaging machinery. The available technical data identifies its operating requirements, process consumptions and installation parameters for evaluation within a beverage production or industrial packaging project.Integrated Cleaning Unit functionality is specified, supporting cleaning procedures as part of routine operation. Cleaning power consumption is stated at 10 ± 1.2 kW, with further requirements for cold water, hot water, steam, foam detergent and external cleaning in DIMC Flex configuration.Operational Performance & VersatilityThe A3/Flex 300V supports aseptic carton filling through heat sterilization, hydrogen peroxide treatment and controlled utility supply. Hydrogen peroxide concentration is specified at 35%, with consumption of 1.5–2.0 l/h. Steam supply is specified at 170 kPa and 130 °C, with consumption of 2.4 kg/hpressed air requirements include a supply pressure of 600–700 kPa. Air consumption is 470 Nl/min for the standard Tetra Pak A3/Flex configuration and 1,125 Nl/min for the A3/Flex with PT/Flex configuration. Optional ice-water cooling operates at 200–400 kPa, with an inlet temperature of 2–5 °C and a flow rate of 2–7 l/min.Installation Requirements & Site PreparationInstallation planning should allow for the machine footprint, access around the operating platform and the height required for the filling system. The listed configuration includes a platform with stair measuring 2,470 mm, a floor width of 5,202 mm, roof height of 9,645 mm and DIMC Flex dimensions of 10,645 mm and 8,549 mm.The installation requires 400/230 V electrical power, compressed air at 600–700 kPa, product supply at 70–250 kPa, cold water, hot water, steam and cleaning media connections. Cold-water supply is specified at a minimum of 3,000 l/h. Hot water requires 300–450 kPa pressure and an inlet temperature of 55–60 °C. Cooling and utility connections should be sized according to the selected machine configuration.Safety Standards & Compliance CertificationThe filling machine is designed for controlled industrial packaging environments and requires operation within the specified ambient temperature range. Its aseptic processing arrangement uses defined steam, cooling-water, compressed-air and hydrogen-peroxide operating conditions to support hygienic carton filling procedures.For machines equipped with HI, nitrogen quality must comply with applicable local regulations and specifications. Where local requirements do not apply, nitrogen is specified in reference to European Directive 1996/77/EC or the US Code of Fe
seller offer No. resale LC683