piallatrici usati in vendita (502)

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmfeed: 5-25 m/minDimensions (L/W/H): 4700/1800/1100 mmweight: ca. 4.000 kgCASOLIN MEGA 230/6 four-side planer------------------------------------------6 spindles, with touchscreen control.Width and height controlled.Spindle arrangement:1st spindle: bottom, 40 mm diameter, 6,000 rpm, 5.5 kW2nd spindle: right, 40 mm diameter, 6,000 rpm, 11 kW together with3rd spindle: left, 40 mm diameter, 6,000 rpm4th spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW5th spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW6th spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kWMachine without machining tools.The additional screen on the front of the machine is not included in the scope of delivery (is part of the window system).Machine already dismantled and stored.(technical information according to the manufactu ...

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2000 mmFeed motor: 4 kWFeed speed: 5-24 m/min.WEINIG Unimat 23 E Planer and moulder------------------------------------------6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS controlMachine will be cleaned and functionally checked before deliveryWorking width 20 - 230 mmWorking height 8 - 120 mm1st spindle (bottom) 5.5 kW (motor replaced)-------------------------Diameter 40 mmSpeed 6,000 rpmTool swing diameter 125 - 180 mmRebating unit including toolHardened table insert in front of 1st (bottom) spindle2nd spindle (right) 12.1 kW (motor replaced)-------------------------Shared motor with left vertical spindleDiameter 40 mmSpeed 8,000 rpmTool swing diameter 112-250 mmMax. Tool diameter behind stop plane 203 mmMax. groove depth 35 mmAxially travel 80 mm3. Spindle, left------- ...

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-24 m/min.total power requirement: 27 kwDimensions (L/W/H): 3900 x 2200 x 2000 mmweight of the machine ca.: 2500 kgWeinig Profimat 23 four-side planer, window version withglazing bead removal or can be used as a grooving spindleATS control and program control------------------------------------Machine was factory overhauled by Weinig in 2024.Technical Specifications Summary(Please inquire about any additional accessories included)--------------------------------------------------------Gener al------------------------------------> Working width: 230 mm> Working height: 120 mm> Number of spindles: 6> Planer table length: 2500 mm> Feed motor: 3 kW> Feed speed: 5-24 m/min> Total power requirement: 27 kW> Dimensions: 3900 x 2200 x 2000 mm> Machine weight, approx ...

Number of spindles: 5 St.Working width: 240 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-36 m/min.Weight: ca. 3500 kgcontrol: SCM Control 10 SCM Superset NT with workpiece return----------------------------------The machine is in cleaning and completely checking process at the moment.Brief Summary:----------------------------------- 5 spindles- Powerful motors- Left and upper spindles controlled for width and height- With workpiece return to the operator1st spindle----------------------------------First lower horizontal spindleMotor with brake 7.5 kWDiameter 40 mmSpeed 6,000 rpm2nd spindle----------------------------------First right vertical spindleMotor with brake 7.5 kWDiameter 40 mmSpeed 6,000 rpmT-set quick-clamping system3rd spindle----------------------------------First left vertical spindleMotor with brake 7.5 kWDiameter 40 mmSpeed 6,0 ...

Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: Memory-Funktion Weinig Powermat 600 Compact--------------------------------------------------------------- -------The machine has been cleaned and fully inspected.Brief Summary:----------------------------------- 5 Spindles- Powerful Motors- Left and top spindles controlled for width and heightDetailed Description:---------------------------------------------------------- -------------Technical Data:Working Width: 20-230 mmWorking Height: 10-120 mmNumber of Spindles: 51st Spindle - Bottom-----------------------------------------------Motor with brake: 7.5 kWSpindle diameter: 40 mmSpeed: 6,000 rpmTool Circle: 125-145 mmTool Circle for Rebating Cutter: 130-160 mmAxially Travel: 5 mmRebating DeviceMarathonCoatine for table insert in front of ...

Number of spindles: 5 St.Working width: 20 - 230 mmWorking height: 8 - 120 mmLength of the planing table: 2000 mmFeed motor: 1,1 kWFeed speed: stufenlos regelbar 2 - 12 m/min.Control: Memory Funktion 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table----------------------------------------------------------------- -------------Machine will be cleaned and functionally tested before delivery !Technical manufacturers description:--------------------------------------Working width: 20 - 230 mmWorking height: 8 - 120 mm1st spindle horizontal, bottom---------------------------------------Motor with brake: 5.5 kWDiameter 40 mmSpeed 6000 rpmTool radius 125 - 145 mmAxis adjustment range 5 mmFolding device including rebate cutterMarathonCoating for table insert before and after the 1st lower spindle2nd spindle vertical, right---------------------------------------Motor w ...

Working width: 410 mmLength of the planing table: 1450 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2650x850x1100 mmweight of the machine ca.: 750 kgSCM Surface planer F 410 N-----------------------------Technical manufacturers description:Planing width: 410 mmTotal table length: 2600 mmTable height: 855 mmFeed table length: 1450 mmAluminum planing fence swivels up to 45°Planing fence dimensions: 1100 x 170 mm4-knife planing shaft diameter: 120 mmKnife shaft speed: 5000 rpmMotor power: 4 kWTERSA monobloc one-way reversible cutterheadSCM dressing protection device integrated in machine stand120 mm diameter extraction nozzleManual star-delta switchMotor protection switch, undervoltage releaseLockable main switchAutomatic motor brakePivoting auxiliary fence-----------------------------Price of the above machine on request!-----------------------------(technical data accor ...

Number of spindles: 5 St.Working width: 250 mmWorking height: 160 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-24 m/min.control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER-------------------------------LIKE NEW, showroom machine !- 5 spindles: bottom, right, left, top, bottom- Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm- Width and height motor-controlled:left spindle radialupper spindle axial- Feed carrier motor-controlled- Additional motor-controlled positioning:right spindle radial and axialleft spindle axial- working width 250 mmTECHNICAL DATA-------------------------------Working width (perimeter of tools 163 mm) 15 - 230 mmWorking height(perimeter of tools 163 mm) 10 - 150 mm(perimeter of tools 123 mm) 10 - 160 mmMin. workpiece length:single piece: min. 800 mmpiece by piece: min. 300 mmThe processing of the work pi ...

Number of spindles: 5 St.Working width: 230 mmWorking height: 160 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-24 m/min.Control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER -------------------------------LIKE NEW, showroom machine !- 5 spindles: bottom, right, left, top, bottom- Speed: frequency-controlled 4,000 - 6,000 rpm- Width and height motor-controlled:left spindle radialupper spindle axial- Feed carriage motorized adjustmentTECHNICAL DATA in Detail-------------------------------Working width (for tool diameter 125-163 mm): 15-230 mmWorking height (for tool diameter 125 mm): 10-160 mm(Tool diameter up to 163 mm): 10-160 mmMin. workpiece length:single piece: min. 800 mmpiece by piece: min. 300 mmThe processing of the work pieces is depending on thefollowing operating parameters:material, wood moisture, tools, diameter of the chip removaland f ...

Number of spindles: 6 St.Working width: 230 mmWorking height: 160 mmLength of the planing table: 1050 mmFeed motor: 7 kWFeed speed: 6-40 m/min.control: MemoryPlus Weinig Powermat 1200------------------------------------------------------------------ -----with infeed automation Weinig wheel magazine EM 100 and linkedwith outfeed automation Weinig High-Mech A 1The machine will be completely overhauled at our warehouse before delivery !Detailed description:---------------------------------------------------------- -------------1. Weinig planer and moulder Powermat 1200------------------------------------------------------------------ -----Technical data:------------------------Working width 20 - 230 mm (with tool flight circle 93 - 163 mm)Working height 10 - 160 mm (with tool flight circle 93 - 163 mm)1. Spindle-----------------------------First lower horizontal spindleMotor with brake 7.5  ...

Anno e produttore: 1991 — Michael Weinig AG Dimensioni (mm): 4100 × 1800 × 1500. Alimentazione: 380 V – 50 Hz Parametri di lavoro: Macchina per modanature a quattro lati, modello Profimat 22 N Auction-ID: A1-49182-3

Number of spindles: 6 St.Working width: 15 - 250 mmWorking height: 10-200 mmLength of the planing table: 2000 mmFeed motor: 4 kWFeed speed: 6-24 m/min.Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation)------------------------------------- Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom)- Working width: 15 - 250 mm- Working height: 10 - 200 mm- Spindle speed: Frequency-controlled 4,000 - 8,000 rpm- Feed speed: 6 - 24 m/min, infinitely variable- Feed motor with electronic brake: 4 kW- Equipped for glazing bead separation in window production- Motorized axial and radial spindle adjustment- K2 Comfort Control, Professional - 9 TouchscreenManufacturers Description (Summary):------------------------------------1st Spindle: HORIZONTAL BOTTOM------------------------------------Siemens IE3 motor with inverter brake: 7.5 kWDiameter: 40 mmSpindle  ...

Numero di serie: 440.07.476.12Superficie di supporto: circa 1500 x 300mm con ugello aaspirazione Riferimento: Wup - Lotto 12 Auction-ID: A7-49056-67

Working width: 500 mmWorking height: 240 mmMotor output: 4,0 kWLength of the planing table: 2470 mmNumber of knives: 4 St.Feed speed: 7/14 m/min.Dust suction hood: mmDimensions (L/W/H): mmmachine weight ab.: 1050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corsa: 300 mmPeso della macchina ca.: tDimensioni della macchina ca.: mI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Number of spindles: 5 St.Working width: 20 - 230 mmWorking height: 8 - 120 mmLength of the planing table: 2500 mmFeed motor: 1,1 kWFeed speed: stufenlos regelbar 2-12 m/min.weight of the machine ca.: 2500 kg1 WEINIG VARIOMAT Planing and Moulding Machine---------------------------------------Brief Summary:---------------------------------------- 5 spindles- Powerful motors- Cycle-controlled jointing- MemoryPlus control system- Option: Stähle-Hess Saturn single-piece sanding machineTechnical Manufacturers Description:---------------------------------------Working width: 20 – 230 mmWorking height: 8 – 120 mm1st Spindle: Horizontal Bottom---------------------------------------Motor with brake: 7.5 kWDiameter: 40 mmSpeed: 6000 rpmTool cutting circle: 125 – 145 mmAxial adjustment range: 5 mmRebating device incl. rebating cutters2nd Spindle: Vertical Right-------------------------------- ...

planing width: 30-260 mmplaning height: 10-200 mmnumber of spindles: 6 Weight: 6650 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

planing width: 405 mmtotal power requirement: 15 kWWeight: 1900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

planing width: 610 mmtotal power requirement: 19,5 kWWeight: 2500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1100x1160 mmWeight: 950 kgTotal power requirement: 8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 1000-1600 mmworking width: 40-150 mmThickness: 10-80 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 6 St.Working width: 20-230 mmWorking height: 8-160 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Feed motor: 5,5 kWtotal power requirement: 58,3 kwweight of the machine ca.: 4000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 180 mmFeed motor: 3 kWweight of the machine ca.: 2750 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Larghezza di lavoro: 630 mm Altezza di lavoro: 240 mm Potenza motore: 5,5 kW Numero di coltelli: 4 St. Velocità di avanzamento: 6 - 18 m/min. Dimensioni (L/L/H): 1,250 x 1,050 x 805 mm peso della macchina ca.: 825 kg: Tersa velocità di rotazione: 4,500 U/dimensione mintable: 630 x 1,000 mm: elektrisch - manuell I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Number of spindles: 4 St.Working width: 15 - 230 mmWorking height: 10 - 125 mmFeed speed: 6 - 24 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4191x2144x2000 mmWeight: 6500 kgTotal power requirement: 54,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4960x1900x1700 mmWeight: 5600 kgTotal power requirement: 47,25 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.