saldatrici usati in vendita (1,713)

: GoodAire 1800 output: 1.800 cbm/Stundeweight of the machine ca.: 200 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,6 t: -- mm: -- mmconsisting of:30x article no. 2-280510Quick release pin short- Clamping of 2 components- burnished- with twist lock8x article no. 2-280410.NUniversal stop 150 L - nitrided- nitrided- as standard with fine scaling on both sides4x article no. 2-280420.NUniversal stop 225 L - nitrided- nitrided- as standard with fine scaling on both sides8x article no. 2-280110.GStop and clamping angle 175 L - cast / black oxide finish- Hole / elongated hole- Cast / burnished2x article no. 2-280162.NStop and clamping angle 500 G - nitrided- Left stop- nitrided1x article no. 2-280166.NStop and clamping angle 750 G left - nitrided- Left stop- nitrided 1x article no. 2-280167.NStop and clamping angle 750 G right - nitrided- stop on the right- nitrided1x article no. 2-280910Tool trolley- painted- Permissible total weight 240 kg1x article no. 2-280164.NStop and clamping angle 500 G with turn ...

table diameter: 340 mmtable load: 160 horizontal kg.table load: 100 vertikal kg.swivelling range: 0 - 90.0 Gradturning speeds: 0.6 - 6.0 U/minbore: 60.0 mmmotor: 230 Voltweight of the machine ca.: 56.0 kgrange L-W-H: 385 x 340 x 375 mmFurnishing:- The table can be adjusted at an angle of 0 to 90 degrees tilt and jam- Start / stop via a location-independent foot switch.- Direction of rotation can be selected right / left.- Adjustable rotation time- The turntable has a 60 mm hollow shaft- The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter.- The table speed is adjustable from 0.6 - 6 rpm.- The control of the welding machine via the turntable control is possible.- The ground contact transmits 300 A / 100%.- The turntable and the control are separate.- HF protected.- COM 1800 control with lap welding- Operating instructions in Germa ...

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! SPECIAL OFFER SIEGMUND Retro Welding Table 2400x1200x200 mm, accessories includedSIEGMUND welding table just like 25 years agowith plasma nitriding and modern table legsProduct description- Table dimensions: 2400x1200x200 mm- High-quality S355J2 steel with plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole diameter 28 mm- Drill holes in 100x100 mm grid- Corners, edges, and drill holes chamfered at 45°- Side panel height 200 mm- Drill holes in side panels in a diagonal grid- Construction reinforced with ribsPlasma-nitrided version:- Protection against rust / scratches / weld spatter adhesion- Corrosion-resistant / higher load-bearing capacitySpecifications:- 28-hole pattern / Dimensions 2400  ...

Auction-ID: A1-48457-232

Auction-ID: A1-48457-251

Dotato di illuminazione LED, montato a parete a circa 2,4 metri di altezza, inclusi scatola e interruttore a parete, si prega di notare che si tratta! Senza canale di scarico. Auction-ID: A1-48457-205

Dotato di illuminazione LED, montato a parete a circa 2,4 metri di altezza, inclusi scatola e interruttore a parete, si prega di notare che si tratta! Senza canale di scarico. Auction-ID: A1-48457-207

Auction-ID: A1-48457-174

Auction-ID: A1-48457-233

Dotato di illuminazione LED, montato a parete a circa 2,4 metri di altezza, inclusi scatola e interruttore a parete, si prega di notare che si tratta! Senza canale di scarico. Auction-ID: A1-48457-206

Descrizione generale Cella robotica completa per saldatura MIG/MAG integrata da VARSTROJ d.d. e equipaggiata con un robot OTC Daihen FD-B4L a sei assi. Il sistema include un posizionatore a doppia stazione, una fonte di alimentazione per saldatura VARSTROJ VPS 4000 DIGIT, una stazione di pulizia delle torce, un controller robotizzato, un involucro di sicurezza e una stazione operatoria per la produzione automatizzata di saldatura. Dettagli tecnici Integratore: VARSTROJ d.d. (Slovenia) Robot: OTC Daihen FD-B4L (6 assi) Modello di sistema: FD-B4L-2DM/1G/MIG Anno: 2013 N. di sistema: 1026312 Processo di saldatura: MIG/MAG Fonte di alimentazione: VARSTROJ VPS 4000 CIFRE (400 A @ 50%) Posizionatore: HZP300/EO / P250 NV Alimentazione: 3 × 400 V / 50 Hz Carico collegato: 50 kVA Aria compressa: 6 bar Stazione di pulizia torcia: J. Thielmann TFC-4000/DE Condizioni Buone condizioni industriali  ...

current intensivity: 1,2 / 0,5 Awire dia.: 0,8 - 1,6 mmIP protection class: IP 43 dimensions: 250x210x190 mmspeed: 1 - 25 m/minweight: ca.7,2 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Numero di serie: 1920Carico collegato: 24 kVATensione di controllo: 220 VRiferimento: Walter - Lotto 7 Auction-ID: A7-48268-6

table length: 3000 mmtable width: 1500 mmtable height: 850 mmside-clamping surface:: 200 (Höhe) mmweight: 1518 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Distance between holes in side wall 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including 28 tool set 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 3000 x 1500 x 200 mm- Plasma nitrided version with scale- incl. 6x base equipment- incl. 28 tool ...

wheel diameter: 900 mmdepth: 900 mmwidth: 940 mmheight: 1.050 mmDisc-Ø: 900 mmDepth: 900 mmHeight: 1.050 mmWidth: 940 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table load: 150 kgweight of the machine ca.: 250 kgdimensions of the machine ca.: 800 x 700 x 950 mmExhibit MachineProducer: BENDMAKType: SRP 015Load capacity: 150 kgLoad center: 100 mmEccentricity: 100 mmRotation of the turntable: 360°Strongest inclination: 90°Input Power: 380 VRotary motor: 0,18 kWtilt motor: 0,25 kWSpeed: 1,4 m/minSlew: 30 sek. Table-Ø: 500 mm T-Slots: 5-72 Height in horizontal rotation: 700 mmDimensions: Height: 950 mm Length: 800 mm Width: 700 mmWeight: ca. 250 kg Earthing: 300 Amp. Additional information: - adjustable speeds - control panel with 5 m cable - digital speed indicator on the control panel for monitoring the rotation - weld grounding mechanism - mechanical angle indicator - engine brake with air coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kWvolume capacity: 20.000 m³/hweight: 1590 kgModular plug & play airtowerfor hall extraction of welding fumes with integrated, soundproofedFan, automatic, differential pressure controlledFilter cleaning, system control with color display, particle pre-separation andIFA - tested filter cartridges. The system is for a volume flow ofaverage 20,000 m³ / h designed1st filter stage - main filter:Filter area: 222 m²Number of filters: 6 piecesDust class according to DIN EN60335-2-69: M.Degree of separation:> 99.9%Cleaning: Jet - PulseCompressed air connection: NW 7.2 mm,4-6 bar, oil and water free2nd filter stage - fine dust filter.Filter area: 65 m²Filter class according to ISO 16890: ISOePM1 80%3rd filter stage -Synthetic fiber mats:Filter area: 8 m²Filter class according to ISO 16890: ISOcoarse 60%Total filter area: 295 m²Dimensions:Width  ...

- Vario matic Rotation / Angolo - Telecomando con Dro - Molto pochi usati - incluso un falso mandrino da 2000 mm - Marcato CE 

Corrente di saldatura: max. 250 Tensione a circuito aperto: max. 66 Volt Frequenza di carico connesso: 400 Vweight: 65 kg Dimensioni (LxWxH): 900 x 500 x 750 mmMIG/MAG saldatrice schermata dal gas: inclusi il pacchetto tubo da 3m. I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Diametro del tavolo: 790 mm Carico del tavolo: 500 Kg Intervallo di rotazione: 0 - 135 Velocità di rotazione di grado: massimo. 2,0 U/min. Frequenza di carico connessa: 400 Vweight: 0,95 tDimensioni (LxWxH): 1,4 x 0,8 x 1,5 m. Pianello girevole con saldatura inclusa: Colonna di controllo con interruttore a piede - mandrino da 630mm - Chiave mandrino I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / perforated tableincluding accessory set WMT Basic-Set 2.0The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3)Surface hardness 850 VickersSurfaces that have been ground down and planed smooth.Hole diameter: 28mm, countersunk by 3mm100 x 100mm gridSide panels 200mmHole spacing in the side panels 50mm, diagonal gridHeight adjustable from approx. 830 - 890mmSubstructure reinforced with 140 x 15mm flat steelIncluding base bearings, 110mm diameterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lunghezza tavolo: 1200 mm Larghezza tabella: 800 mm Altezza tabella: 980 mm: kgweight della macchina ca.: 0,95 tWorkstation - Diametro del foro: 28 mm - Griglia: 100 x 100 mm - Pannelli laterali: 150 mm - Spessore pannello: 10 mm I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Numero: 93 Peso di posizione: 320 kgcondizione: NEU : 28 mm Dimensioni: 1,0 x 0,6 x 0,85 m Set speciale da 93 pezzi, sistema 28mm Include carrello degli utensili Materiale: Acciaio lucidato di alta qualitàAmbito di consegna: vedi immaginiI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Numero: 102 Peso di posizione: 320 kgcondizione: neu : 28 mm Dimensioni: 1,0 x 0,6 x 0,85 m Set speciale da 102 pezzi, sistema 28mm Include carrello degli utensili Materiale: Acciaio lucidato di alta qualitàAmbito di consegna: vedi immaginiI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Numero: 80 Peso di posizione: 150 kg condizione: neu : 28 mm Dimensioni: 0,8 x 0,6 x ,05 m Set speciale da 80 pezzi, sistema 28mm Materiale: Acciaio lucidato di alta qualità Ambito di consegna: vedi immagini I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Numero: 10 Stk. Intervallo di serraggio: 25 mm: 28 mm Peso: 10 kg Dimensioni: 0,3 x 0,3 x 0,3 x 0,2 m10 Bulloni di serratura a rilascio rapido - sistema fori da 28mm - per spessore tavolo da 25mm I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.