87 DUMETA macchina utilizzata in vendita

table diameter: 1600 mm table load: 6 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 12000 Nm 0: 1,5 / 2,2 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 2,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 6000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,1 + 2,2 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mm table load: 5000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1300 - 2050 mm max. torque on the faceplate: 10000 Nm engine output: 1,5 / 1,5 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 120 - 380 mm height: 95 mm daylight: 170 mm external diameter: Futter 400 mm external diameter: Spannhebel 600 mm weight: 26 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mm table load: 1,2 t swivelling range: 0 - 120 Grad turning speeds: 0,06-0,6 U/min max. torque on the faceplate: 2400 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,75 + 1,1 kW weight of the machine ca.: 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 200 - 500 mm height: 110 mm daylight: 240 mm external diameter: Futter 320 mm external diameter: Spannhebel 700 mm weight: 56 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 100 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 240 mm feed: 100 - 1000 mm/min total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 80 t workpiece diameter: 850 - 5500 mm drum diameter: 450 x 240 mm feed: 100 - 1000 mm/min total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 450 x 180 mm feed: 100 - 1000 mm/min total power requirement: 5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M12 mm : 400 U/min. : 28 Nm air pressure: 6 - 8 bar working area: 150 - 1900 mm weight of the machine ca.: 12 kg Pneumatic Tapping Machines for M3 - M12 thread, angle adjustable. 6 pcs. Keyless chuck with clutch. optional: Working table with T-slots: 750x600x650mm 990x700x800mm or. Magnetic base. Available up to max. M16, M22 and M33. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M6 - M22 mm : 60/200 U/min. : 105 Nm air pressure: 6 - 8 bar working area: 400 - 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 t workpiece diameter: 320 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mm table load: 3 t swivelling range: 0 - 135 Grad turning speeds: 0,07- 0,7 U/min table height adjustment: von 980 bis 1750 mm max. torque on the faceplate: 4500 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,02 - 0,2 U/min height adjustment: 1450 - 2200 mm max. torque on the faceplate: 20000 Nm engine output: 1,5 / 2,0 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 4 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 8000 Nm 0: 1,1 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 20000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 3,0 + 4,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 3000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1200 - 1800 mm max. torque on the faceplate: 6000 Nm engine output: 1,1 / 1,1 kW welding current: 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mm table load: 8 t swivelling range: 0 - 130 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1210 bis 2238 mm max. torque on the faceplate: 1200 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 10 - 200 mm height: 67,5 mm daylight: 65 mm external diameter: Futter 200 mm external diameter: Spannhebel 360 mm weight: 4 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 80 - 280 mm height: 67,5 mm daylight: 100 mm external diameter: Futter 300 mm external diameter: Spannhebel 480 mm weight: 13 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro filettatura: M3 - M8 mm

table diameter: 600 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,8 U/min max. torque on the faceplate: 450 Nm table pass: 80 mm welding current: 500 Ampere total power requirement: 0,18 + 0,18 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 600 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 2,0 U/min height adjustment: 850 - 1300 mm max. torque on the faceplate: 900 Nm engine output: 0,37 / 0,37 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mm table load: 5 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 10000 Nm 0: 1,5 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mm table load: 0,5 t swivelling range: 0 - 135 Grad turning speeds: 0,2 - 3 U/min height adjustment: 400 - 900 mm boring diameter: 100 mm welding current: max. 500 Ampere total power requirement: 0,75 kW including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M5 - M16 mm : 250 U/min. : 48 Nm air pressure: 6 - 8 bar working area: 150 - 1900 mm The pneumatically driven D-JSC tapping machine has, among other things, one Air motor with quick chuck and a stable and flexible Labor arm. The mounting arm can be attached directly to the work table using the mounting flange and is ready to work immediately. This means fast changeover times guaranteed. It is possible to simply tap the tap to the desired hole to be attached without having to position the component under the tap. Version with an adjustable angle, whereby the quick chuck can tilt so that horizontal tapping is also possible. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 pcs. Quick change chucks with slip clutch. Optional: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - magnetic base. The data for this ad was created with ModulMWS - the  ...

thread dia.: 12 mm : 375 U/min. working area: 180 - 1000 mm engine output: 0,7 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mm table load: 1,0 t swivelling range: 135 Grad turning speeds: 0,12 - 1,2 U/min : 820 mm welding current: 500 Ampere total power requirement: 0,75 + 0,55 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.