Linee di produzione (52)

Linea utilizzata per la produzione di formaggio giallo da Obram. Capacità 10.000 kg/giorno.

Complete falling film vacuum evaporator, previously used for skimmed milk or sweetened whole milk, consisting of a 4 effect TVR Evaporator. Still mounted in the cheese plant in Spain till end of April 2026. The product feed rates in the installation are ± 14 t/h with a comparative temperature between 73 and 50°C from the 1st to the 4th effect., Processing rates used by the current plant for skimmed milk:, - Infeed flow: 14.000 kg/h @ 9% DM, - Infeed temperature: 5 °C, - Water Evaporation: 11.375 kg/h, - Outfeed flow: 2.625 kg/h @ 48% DM, - Steam consumption: 2.050 kg/h, Processing rates used by the current plant for sweetened whole milk:, - Infeed flow: 14.000 kg/h @ 25% DM, - Infeed temperature: 5 °C, - Water Evaporation: 7.637 kg/h, - Outfeed flow: 6.363 kg/h @ 55% DM, - Steam consumption: 1.375 kg/h, Approximately operating temperatures:, - First effect (steam side): 73 °C, - Fir ...

IMPIANTO DI TRATTAMENTO APV UHT – 2006 Include sia sistemi TUBULARI che INJECTION. Capacità 8.000 Lt/h - APV Scambiatore di calore a piastre per il preriscaldamento. - Sistema di trattamento tubolare APV (indiretto) UHT. - Sistema di trattamento INIEZIONE APV (vapore diretto) UHT. - OMOGENEIZZATORE ASETTICO APV - UNITÀ DI PULIZIA CIP APV Riscaldamento rapido (~300°C/sec) per un gusto ottimale e una degradazione minima Raffreddamento istantaneo lampo per preservare sapore e aroma Riscaldamento uniforme tramite scambiatori tubolari indiretti per un trattamento termico delicato Alto recupero energetico (fino al 90%) per ridurre il consumo e i costi delle utenze. Controllo termico preciso con trattamento uniforme del prodotto Eliminazione efficiente delle spore con valori C molto bassi per un'eccellente stabilità a scaffale Basso ingombramen ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Set di pastorizzazione del latte con separatore Seital 2000-3000[tel:2000-3000] l/h Descrizione Questo pastorizzatore combinato GEA VT 10 con separatore di panna Seital è stato utilizzato su formaggi e prodotti lattiero-caseari freschi. Questo è l'ideale per un caseificio di piccole/medie dimensioni che vuole allontanarsi dai separatori di pulizia manuale e dal processo di pastorizzazione di Bach guadagnando tempo, efficienza e qualità del prodotto. Avere un separatore di panna apre nuovi mercati per i prodotti lattiero-caseari come burro, panna, panna rappresa, latte scremato e prodotti lattiero-caseari a zero grassi sono alcune delle opportunità. Pastorizzatore marca : GEA Modello : VT 10 Anno di fabbricazione : 2005 S/N : 169/15597[tel:169/15597] Temperature: Mostrate nel grafico Ingresso acqua calda PHE Serbatoio di equilibrio Regolazione della valvola ...

, from the manufacturer (built in 2002) are available for sale, each with a . , totaling approx. 3,534 hl. The tanks are insulated, clad and have three frame cooling zones and cone cooling for precise temperature control. Each tank is designed for a maximum overpressure of 2 bar and can be used at operating temperatures of -10 to 50 °C. The total cooling area is 13.3 m². With a robust stainless steel construction and upright positioning, the tanks are ideal for breweries or beverage manufacturers that require temperature-controlled fermentation and storage processes. Individual sale possible. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable stainless steel tanks, Gross volume: 58890 l, Max. overpressure: 2 bar, Operating temperature: -10 to 50 °C, Total cooling area: 13,3 m², Length: 3370 mm, Width: 3370 mm, Height:  ...

IMPIANTO DI PREPARAZIONE SUCCHI A) Tetra Almix Spark 020V Anno di costruzione: 2001 Marca: Tetra Pak Opzioni installate: aspirapolvere; Stazione di svuotamento fusti Portata: 0-15000 l/h Acqua di tenuta: attacco 1/2 pollice, capacità 700 l/h, temperatura 15C, pressione 0,3 bar Aria dello strumento: attacco 1/2 pollice, potenza 150 NI/h, pressione 600 kpa Acqua trattata: attacco SMS 51, portata 0-15000 l/h, temperatura ambiente, pressione 300kpa Uscita prodotto: attacco SMS 63, portata 0-15000 l/h, pressione 300 kpa B) Tetra Alblend Spark Anno di costruzione: 2001 Portata: 5000 l/h Capacità CIP. 10000 l/h Grado Brix zuccherino: 60Brix Acqua trattata: Attacco DIN50, temperatura 10C, pressione 150kPa Zucchero: Terminale DIN40, temperatura 25C, pressione 400kPa Concentrato: Terminale DIN40, temperatura 25C, pressione 400kPa CIP: terminale DN50, pressione 300kP ...

The Waukesha Cherry-Burrell 015 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,054 liter per revolution. Maximum nominal capacity: 2,0 m3/h. Inlet / Outlet connection: 1-1/2. Maximum product pressure: 13,8 bar. Maximum pump speed: 700 rpm. The pump is used in a ice cream factory for product pumping. The current motor with this pump is 0,75 kW - 1,395 rpm - 380/420 ...

IMPIANTO UHT STORK USATO Marca: Cicogna Modello: 2000 Completamente ristrutturato nel 2015 Portata: 1.600 l/h Prodotti: Latte UHT: bianco/bianco, cioccolato, aromatizzato, bevande UHT di soia Siemens S7 PLC Condizione: Ottime condizioni d'uso

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Linea utilizzata per la produzione di ricotta e panna. Novità: 2010. Sezione di preparazione della ricotta caldaia di coagulazione - 10m3 Pompa a membrana - 10 m3/h Sezione di preparazione del prodotto finale Separatore di siero di latte - 10 m3/h lattiera 09CR02 - 3 m3 (capacità di lavoro) sistema di dosaggio della panna Pompa FRISTAM - 5 m3/h sistema di dosaggio in ingresso (polpa) Pompa FRISTAM - 2 m3/h miscelatore statico prodotto pompa a pistoni per confezionatrice Hugart – 2m3/h

Tetra Pak Tetra Therm Aseptic Visco Line for pasteurisation / sterilization of concentrated beverage bases by a Tubular Heat Exchanger (THE) system. Capacity 2.600 up to 8.150 liter per hour. At the current plant the line is used for products up to 100 °C. The indirect heating temperature is up to a maximum of 135 °C. Holding time set at 0 / 5 / 10 seconds. CIP Cleanable., In the Tetra Therm Aseptic Visco system, heating and cooling will take place in Tetra Spiraflo MTC tubular heat exchangers. Modules with a narrow ring section are used for heating and cooling to ensure optimal heat transfer. The product is pre-heated in stages within the Spiraflo tubular heat exchangers. The Spiraflo tubular heat exchanger is equipped with a sliding O-ring system. This means that the product and the outer tubes are not welded together. This prevents stress corrosion cracking and minimizes maintenance ...

Diversi tipi di pane sformato e arrotolato. Niittypitko 2000 pz / h, 2 file, spessore impasto 3-4 mm Pane al caffè Kranssi 2000 pz/h, 2 file, spessore impasto 3-4 mm Muhku, 10 000 pz/h, 8 file, spessore impasto 6-8 mm Ciabatta, 7200 pz/h, 6 file Pane piegato, 4800 pz/h, 4 file, spessore impasto 5 mm Capacità basata su 20 colpi al minuto per il nastro retrattile, in combinazione con il prodotto sistema di trasporto di scarico Specifiche del prodotto: Produttore: Rademaker Holland Tipologia: Linea pane Crusto Anno: 2008 Tensione: 3 x 400 V + N + Pe, 50 Hz Tensione di controllo: 24 Vdc Potenza assorbita: 21, 9 kW Inom: 41 A, fusibile max 50 A Consumo medio d'aria: 196 nl/min Consumo massimo d'aria: 548 nl/min Dimensioni: L 21 000 mm, L 3000 mm, H 6000 mm

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

Linea usata per la lavorazione dei fagiolini di Femia. Novità 2007. Portata: 5000 kg/h. La linea è composta da: 1. Disincrostante. 2. Sciacquatrice. 3. Spaccalegna dell'asta. 4. Taglierina dell'asta. 5. Aeratore. 6. Distributore vibrante. 7. Taglierine a punta di fagiolo. 4 pezzi. 8. Trasportatori.

La pompa centrifuga Mac Ewans è una pompa destinata ad applicazioni sanitarie. Precedentemente usata in una pianta di caseina. Motore: 7,5 kW - 400 V - 50 Hz - 1,440 giri/min - 14,2 A. Diametro dell'elica: 180 mm. Collegamenti sull'ingresso: 70 mm. Collegamenti alla presa: 60 mm. Capacità stimata: ± 20.000 ltr/h, macewans.co.nz/, Tipo di macchina: Pompa centrifuga, Numero di stock: 1444, Diametro dell'elica: 180 mm, Motore: 7,5 kW - 400 V - 50 Hz - 1,440 giri/min - 14,2 A, Capacità stimata: ± 20 m3/h

Linea utilizzata per la produzione di "impasti" di cioccolato. Anno di produzione 2008. La linea comprende: - serbatoio resistente agli acidi con una capacità di 1000 L - Miscelatore a doppio nastro da 250 litri - Macchina per lo stampaggio di carrozzerie CFA 3 - Tunnel di pre-raffreddamento TCH-600

The APV Cleanline CL3/078/20 is a positive displacement rotary lobe pump with sanitary design which can handle dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: 0,780 liter per revolution. Maximum nominal capacity: 33,7 m3/h. Inlet connection: 80 mm. Outlet connection: 71 mm. Maximum product pressure: 7 bar Maximum pump speed: 720 rpm. Maximum temperature: 110 °C. The pump is used in a dairy for product pumping. The current motor with this pump is 5,5 kW - 1.430 rpm - 400 V - 50 Hz - 11 ...

Marca : Armfield Capacità : 40 litri Miscelazione: Silverson Mixer Recipiente di lavorazione con raffreddamento Utilizzo : Pastorizzatore e miscelazione vesle Modello: FT 40 Marca : Armfield Modello : FT 75 Utilizzo : Cristallizzatore Miscelatore a spillo Tubo singolo Utilizzo : Margarina e gelato Marca : Armfield Modello : UHT Utilizzo : Pastorizzatore UHT Tutti in ottime condizioni usciti dall'università nel Regno Unito

Tetra Pak Tetra Spiraflo Tubular Heat Exchanger (THE) previously used in a dairy for whey protein as pre-heater with indirect hotwater preparation (15 - 70 °C), holding section (1 - 3 minutes) and cooling section (65 - 10 °C)., Unit exist out of:, - 7x tubes for pre-heating (Tetra Pak MT-38/1x20s-6, total surface area: 2,25 m2, product connection DN25, hotwater connection DN20 with indirect hot water system with plate heat exchangers, pumps (CH18-10 A-W-G-BQQV - 7,5 m3/h - 0,72 kW), steam valves (Samson), expansion vats, manual valves and interconnecting piping., - 9x tubes for cooling (Tetra Pak MT-70/4x16s-6s-1, jacket: 20 bar - 110°C - 16 liter, inside: 50 bar - 110 °C - 3,6 liter, total surface area: 10,17 m2, product connection DN38, (ice)water connection DN50)., - Flowmeter (Endress+Hauser - Promag 300)., - Holding tube, DN 40 (6x 6 meter), complete with bracket and swivel bend ...

Linea Knobel e una linea W&D dosatore di shot per cioccolato. Dosatrice per cioccolato temperato con agitatore o altri prodotti liquidi e leggermente viscosi anche Linea di stampaggio AWEMA Linea di stampaggio cioccolato Hacos

The SPX Waukesha Cherry-Burrell 220 U1 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 1,976 liter per revolution. Maximum nominal capacity: 70,4 m3/h. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar Maximum pump speed: 600 rpm. The pump is used in a dairy for product pumping. The current motor with this pump is 7,5 kW - 1.445 rpm - 400  ...

Zangola continua del burro Impianto completo di PHE, controlli, pompa latticello, serbatoi. Condizione Buone condizioni . Contattaci per maggiori informazioni.

Continuous Butter Making Machine (CBM) which has a production capacity of ± 1.000 kg of sweet, sour, or cultured butter per hour (salted or unsalted). It operates with an input of approximately 2.000 liters of cultured and/or sweet cream per hour (35–42% fat, pH ~4.8, inlet temperature 8–13 °C). The unit is fully electrically driven. All product-contact parts and the frame constructed from stainless steel. It is CIP-cleanable for hygienic operation., The system is supplied with two separate stainless steel skids., Process skid, including:, - Balance tank, - Feed pump, - Vacuum system, - Ice water system, - Flow transmitter at cream inlet (ltr/h), - Buttermilk and CIP collecting tank, - Buttermilk/CIP pump, - Buttermilk plate cooler, - Interconnecting piping and manual valves, - Stainless steel control panel with Siemens S7 PLC, Exor touchscreen HMI, and Danfoss frequency converters ...

Zangola continua del burro Impianto completo di PHE, controlli, pompa latticello, serbatoi. Condizione Buone condizioni . Contattaci per maggiori informazioni.

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV Puma), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ0321, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 641, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and service tools for maintenance including pressing tool), holding tube with slope, booster pump (APV Pum ...

Rademaker / Rondo linea 'salmon en croute' Processore a blocchi Rademaker con linea di make up Rondo. Ha prodotto "Salmon en croute" per i principali supermercati del Regno Unito. L'intera linea è in ottime condizioni e può ovviamente essere facilmente adattata per eseguire altri prodotti come pasticcini, involtini di salsiccia ecc. Utilizzato principalmente stagionalmente quindi solo 11.800 ore di funzionamento.

On behalf of our client, we are requested to offer this Pasta filata cheese line for sale, due to increasing production at the current factory. The whole line is delivered and built up by Sulbana AG Switzerland in 2019 and it is out of production for ± 1 year. The pasta filata cheese line produce products like Mozzarella, Burrata, Kashkaval, Pizza Cheese etc. The capacity of the line is 200 to 800 kg per hour. The line is already dismantled and located in the warehouse of the dairy in Germany, where it can be inspected., The line exist out of the following components:, - Elevator for lifting normcar trolleys of 200 liter with basic ingredients including tipping unit to empty the trolleys inside the feeding bunker. Max load: 350 kg. Manufacturer: Frontmatec Hygiene GmbH, type: Hebe- Und Kippvorrichtung, model: 27000, serial number: P-10259, year: 2019, motor: 0,75 kW - 400 V - 50 Hz., -  ...

Marca : Roversi Volume serbatoio :3000 litri Capacità crema : da 1000 litri a 1500 litri Doppia giacca Impastare I rotoli all'interno della canna Pannello di controllo Area di produzione in acciaio inossidabile Skid montato 2 Sicurezza delle porte più vicine Vedere attraverso il vetro Completamente ristrutturato su ordinazione Produttore Roversi Modello 3000 L

The Alfa Laval MR-200 Sanitary Self Priming Liquid-ring Pump is a pump specially designed for food, chemical, pharmaceutical and other industries where acid-resistant steel is resistant to the products to be pumped. All products wetted parts, i.e. pump casing, casing cover and impeller are made of acid-resistant steel AlSl 316. Clamp screws and legs are made of stainless steel AlSl 304. lntermediate part is in cast iron which is zinc coated and laquered making it highly corrosion resistant. Motor: 7,5 kW - 380/420 V - 50 Hz - 1.450 rpm - 15,3 A. Impeller diameter: 199 mm. Connections on the inlet / outlet: SMS 76 mm (3). Current maximum capacity (based on the available Alfa Laval performance curves and the current motor): 48.000 ltr/h @ 0 Bar., Type of Machine: Sanitary Self Priming Liquid-ring Pump, Stock Number: 1511, Diameter of the impellor: 199 mm, Motor: 7,5 kW - 380/420 V - 50 Hz  ...

CHEESE PORTION CUTTING MACHINE SLICING MACHINE AGED CHEESES GOUDA, EDAM, MIMOLETTE, CHEDDAR E MANY KINDS CON PLC CONTROL E HMI OPERATOR PANEL ACCIAIO INOSSIDABILE COMPLETO LO SPESSORE È REGOLABILE

Unused Alfa Laval ThinkTop V50 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V50 series is the compact option with a feature set tailored to valves that require only one solenoid valve such as butterfly and single seat valves. Solenoid valves 1 x 3/2. Digital 24 VDC. Article number: 9615400403., Type of Machine: Valve-top control unit, Art. no.: 9615400403

Unused Alfa Laval LKB Butterfly Valve which is a reliable, hygienic in-line valve for routing low and medium-viscosity liquids in stainless steel pipe systems due to its substantial opening area and low flow resistance. This hygienic valve is designed for on-off duties with low to medium-viscosity liquids in hygienic applications across the dairy, food, beverage, brewery and many other industries. Article number: 9612628569. EPDM 316L KIT ACT LKLA-T Ø85 NC 6 MM. This LKB valve is with a pneumatic actuator for pneumatic operation (item code: 9612194003, AIR-ACTUATOR LKLA-T-85 NC 76,1 MM/DN 65-80)., Type of Machine: Butterfly Valve, Art. no.: 9612628569, Pneumatic Actuator: Yes

Unused Alfa Laval LKB Butterfly Valve which is a reliable, hygienic in-line valve for routing low and medium-viscosity liquids in stainless steel pipe systems due to its substantial opening area and low flow resistance. This hygienic valve is designed for on-off duties with low to medium-viscosity liquids in hygienic applications across the dairy, food, beverage, brewery and many other industries. Article number: 9612628569. EPDM 316L KIT ACT LKLA-T Ø85 NC 6 MM. This LKB valve is with a pneumatic actuator for pneumatic operation (item code: 9612194003, AIR-ACTUATOR LKLA-T-85 NC 76,1 MM/DN 65-80)., Type of Machine: Butterfly Valve, Art. no.: 9612628569, Pneumatic Actuator: Yes

Unused Alfa Laval ThinkTop V70 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V70 series is the more flexible option compare to the V50, that can be configured to meet the needs of the most demanding valve applications such as Mixproof valves. Solenoid valves 3 x 3/2. Digital 24 VDC. Article number: 9615400012., Type of Machine: Valve-top control unit, Art. no.: 9615400012

Luwa SMS GmbH LN-0200 - Vertical Thin Film Evaporator consist of a cylindrical, vertically-arranged body with heating jacket. A rotor inside the body is equipped with rows of pendulum blades along the full length of the dryer., Special thin-film evaporator designed for dairy service, discharge system, vapor pipe, condenser, and drives. It was in used as a pilot plant on a dairy service until early 2001 and afterwards converted to a 2 square metre cheese base processor with discharge system and ran till 2025 in a Casein plant in a dairy factory in New Zealand., The vertical thin film dryers operate as follows: The wet feed is spread by the pendulum blades in a thin layer onto the heated wall. During this process, the volatile components evaporate continuously out of the product layer at high evaporation rates. The pendulum blades are designed with a minimum gap to the heated wall to preve ...

Koch Membrane Systems (GEA Tuchenhagen computer designed) Ultra Filtration (UF) plant for continuous circulation / concentration / filtration and the production of double cream cheese (philadelphia style). Once the plant is running continuously with ratio control, no manual interventions are generally necessary for the production of the UF concentrate. However, for optimal production of consistent quality, strict adherence to various prerequisites is necessary, e.g. regarding cleaning. Line still located at its original position in the dairy in Austria., The Ultra Filtration line exist out:, - Level tank, 750 liter., - Product feed pump (P1), Tuchenhagen VPB 32 L, 5.000 ltr/h, 39 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - Permeate pump (P2), Tuchenhagen VPB 32 L, 5.000 ltr/h, 35 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - CIP pump (P3), Tuchenhagen VPD 51, 110.000 ltr/h, 8 mWs,  ...

Kit di ristrutturazione inutilizzato per una valvola regolatoria pneumatica Alfa Laval CPM CPM Cost-Pressure Modulating Valve (CPMI-2). Kit di assistenza ricambi originali CPMI - 2/XPMO - 2 Upper NBR, EPDM/PTFE inferiore, n. parte 9611920218., Tipo di macchina: Valvola a modulazione a pressione costante, Art. No.: 9611920218

Unused Alfa Laval ThinkTop V50 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V50 series is the compact option with a feature set tailored to valves that require only one solenoid valve such as butterfly and single seat valves. Solenoid valves 1 x 3/2. Digital 24 VDC. Article number: 9615400403., Type of Machine: Valve-top control unit, Art. no.: 9615400403

A Mercer APS Fluidbed Dryer is an industrial fluidized-bed drying system used to gently and efficiently remove moisture from particulate products such as powders, granules, flakes, or pellets. It operates by suspending the product in a controlled stream of heated air, creating a fluid-like behavior that maximizes heat and mass transfer. APS” typically refers to Advanced Processing System, highlighting enhanced control over airflow, temperature, residence time, and hygiene—features important in food, dairy, chemical, and pharmaceutical applications. Previously used in a Casein plant in New Zealand for tor R&D projects. Including Filterhouse, blower, Steam valves and GEA Nucon CV 500 Sanitary Rotary Valve / Airlock., Type of Machine: Fluidbed Dryer, Capacity: 150 kg/h, Product: Dairy products, Dimensions of the fluidbed: 255 x 100 cm, Dimensions: ± 4 x 1,5 x 2 mtr

The Alfa Laval SRU6/260/LS is a robust positive displacement lobe pump designed for the gentle and efficient handling of sensitive process fluids. Engineered in accordance with the most stringent hygienic design standards, the pump features fully validated and effective Cleaning-in-Place (CIP) capability. The SRU pump range is suitable for applications across the dairy, food, beverage, brewing, chemical, pharmaceutical, and home and personal care industries. Its smooth, low-shear pumping principle allows for the handling of products with a wide range of viscosities—from low to very high—including creams, gels, emulsions, aerated mixtures, and media containing delicate cells or organic solids in suspension. Products containing fragile solids, such as curd, can be transferred without damage due to the specially designed tri-lobe stainless steel rotors. The pump has a nominal displaceme ...

Indirect heated Thermisation unit previously used for the production of Creme fraiche 30% and mesophiles product 10%, but it can be used for all acidified + stabilized products. Skid mounted unit existing out of: Tubular Heat Exchangers (GEA Finnah A 544), level tank (200 liter), water pumps (4x Grundfos), flowmeter, valves for product and utilities, interconnecting piping, high pressure product pump (APV Gaulin, type Z4P-0,5BF serienr 96L34959, year 1996, capacity up to 4.000 liter per hour, motor 5,5 kW - 955 rpm - 400 V - 50 Hz) and the control panel with Siemens S5 PLC and Siemens Simatic OP37 operation panel. Current temperature program: creme fraiche: 35 - 51 - 71 - 40 - 29 °C or mesophiles: 25 - 55 - 75 - 40 - 23 - 10 °C. Maximum temperature possible: 85°C.Capacit y of the unit: currently set on 2.500 liter per hour but a ...

Serviced Continuous Butter Making Machine - CBM with a new control panel with simple controls. Output of 800 kg butter per hour sweet butter and 600 kg butter per hour cultured butter. Input of ± 1.600 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Churning motor: 15 kW. Screw conveyor (kneading) motor: 5 kW. Butter milk pump: 3 kW. Feed pump: 3 kW. Vacuum pump: 1,5 kW. New control panel with simple controls with cream inlet temperature indictator, wash water inlet temperature indicator, output temperature indicator, emergency stop, main switch and all on/off buttons for the pumps., Type of Machine: Continuous Butter Making Machine (CBM), Capacity: 600 - 800 kg butter per hour (output), Motors: Churning: 15 kW and Kneading: 5 kW - 415 V - 50 Hz, Year of Major Service: 2024, Operating Hours: 0 h s ...

MultiWeigh MW 16 Head Combination Weigher – High Accuracy | Fully Complete | 2015, High speed machine with memory buckets, We offer this MultiWeigh MW 16-head combination weigher, manufactured by HD-Wiegetechnik Sondermaschinen GmbH (Germany). MultiWeigh is globally recognized for precision weighing technology, reliability, and long service life in the food processing industry., This machine is fully complete, in good working condition, and supplied including collecting chute, making it ready for immediate production use., Technical Specifications, - Manufacturer: MultiWeigh (HD-Wiegetechnik Sondermaschinen GmbH), - Machine Type: MW 16 2.01 57° 3 MIX, - Number of Weighing Heads: 16 with memory buckets (high speed), - Control System: IPC 511, - Scale Interval (d): 1.0 g, - Scale Interval (dw): 5.0 g, - Operating Temperature Range: 0 – 45 °C, - Year of Manufacture: 03 / 2015, - Certi ...

Proseal Fastpack F40, Produttore: Proseal, Modello: Fastpack F40 con stampante, Applicazione: Solo sigillatura superiore del vassoio, Condizione: Usato – in buone condizioni di funzionamento, Descrizione, il Proseal Fastpack F40 è un sigillatore compatto ad alta velocità in linea progettato per una sigillatura superiore affidabile e costante dei vassoi preformati. Questa macchina è ampiamente utilizzata nell'industria alimentare ed è nota per la sua costruzione robusta, il design igienico e le prestazioni stabili in ambienti di produzione continua., Caratteristiche chiave, - Sigillatore a copertura superiore, - Inline, progettazione ad alta capacità, - Costruzione in acciaio inox, - Veloce e

Macchina per l'etichettatura superiore e inferiore, con una stampante ZODIAC per le etichette superiori.

Eagle Pro Pack 240 PRO – Advanced X-Ray Inspection for Packaged Products, The Eagle Pro Pack 240 PRO is a high-performance X-ray inspection system designed for maximum product safety, quality assurance, and production efficiency., Ideal for food, pet food, pharmaceutical, and consumer goods applications,, this system combines cutting-edge detection technology with robust industrial design., ---------------------------------------------------------------, Key Features & Benefits, - Reliable detection of foreign contaminants, even in dense or metallized packaging, - Multiple quality checks in a single inspection, - High inspection accuracy at high production speeds, - Hygienic, stainless-steel construction for demanding production environments, Technical Specifications, Inspection Area, - Maximum inspection width: up to 242 mm, - Maximum inspection height: up to 101 mm, - Conveyor width: ...

Pesatrice multipeso a 20 teste, - Con alimentatori vibranti orizzontali per prodotti veloci come alimenti surgelati o dolciumi/noci., - 20 teste, - Materiale completamente rigido in acciaio inossidabile per evitare che si attacchi., - Con secchio di raccolta per un flusso di lavoro più veloce e controllabile

Hitec, Nastro trasportatore elevabile a Z., Dimensioni nell'album fotografico., Maggiori informazioni su richiesta.

Depositore, 2 serbatoi, 4 teste per serbatoio.