altre macchine per lavorazione dei metalli usati in vendita (10,898)

grinding length:900 mmgrinding width:400 mmworkpiece height:450/530 mmtable clamping surface LxW:1.320 x 300 mmmagnetic plate size:880 mm x 280 mm mmFinimaticCreep speedAdd-on for DiaformRectifier systemCoolant deviceInfinitely variable grinding clamping drive

Bar loading magazine for multi spindle automatic lathe, newManufacturer: Giovanni CucchiMachine type: Bar loading magazine for multi-spindleType: CMSP/CMSPFDesign: Side loader as surface loading magazine or bundle loading magazineCMSP / CMSPF at a glance:Proven technology - in use for decadesThe material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release.These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode.The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the ...

DIMENSIONS / WEIGHTS:. - total height:1000 mm

spindle diameter:100 mmx-travel:1250 mmy-travel:1100 mmz-travel:950 mmspindle turning speed range:2500 U/minRotary-table:1100 x 1000 mmtable surface area:1000 x 1100 mmtool clamping:69871 DIN spindle stroke:630 mmspindle taper:SK50 total power requirement:22/34 kWmax. workpiece weight:3000 kgweight of the machine ca.:13000 kg

DIMENSIONS / WEIGHTS:. - total height:900 mm

travel -x axis:800/1825 mmtravel -y axis:800/460 mmtravel -z axis:600 mmFeeding X,Y,Z up to:0 - 40/40/40 mm/min.swival range +/-:+10 bis -90 x 360 GradRotary-table:800 x 630 mmnumber of T-slots:5 T-slot - distance:125 mmT-Slots:18 mmcenter hole:30H7X15 mmswival range +/-:90 Gradturning speed:20 m/min.Number of axles:3-7 St.Spindle RPM:12.000 1/minmax. tool weight:10 kgmax. tool length:330 mmdiameter of tools max.:80 mmtool changing time:4 secCNC control with15.1" color flat-screen19" machine control panelPCU 50 with Intel Pentium IIWindows XP10.0 GB hard drive

Trowalisier diametro: 1000mm Tensione operativa: 380 VFrequenza: 50 HzRiferimento: Living - Lotto 42 Auction-ID: A7-49056-220

turning diameter:500 mmturning length:1500 mmTechnical Specifications:·Turning diameter over cross slide: 290 mm·Spindle bore: 71 mm·Speed range: 3?2,800 rpm·Rapid traverse speed: 10 / 5 m/min·Feed rate: 1?2,000 mm/min·Total power requirement: 22 kW·Machine weight: approx. 3.2 t·Space requirement: approx. 3.0 × 1.6 × 2.0 m

Erodiermaschine, gebrauchtBaujahr: 1989Bitte kontaktieren Sie uns für weitere Informationen und Bilder über mail(at)tar-mc.com oder www.tar-mc.com

LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:15000 mm

turning diameter:356 mmturning length:700 mmy-axis:±60 mmspindle drive:18 kWcounterspindle motor:15 kWDirect drive for driven tools:5,5 kWMotor starting torque:640 NmMain spindle mount:A2-8 counter spindle mount:A2-6 Rod passage:80 mmmain spindle speeds::4.000 U/minDrehzahl angetriebene Werkzeuge :6.000 U/minrapid traverse speed:30 m/min auf X- und Z-Achse machine weight ab.:5.800 kg12-station turret, all positions drivenC-axis on both spindlesBelt-driven and infinitely variable drive on all motorsPrismatic guideways on all axesOil cooler for both spindles, manufacturer DaikinAutomatic, dialog-guided programming system MAPPSAutomatic monitoring of tool load and tool wearTwo Renishaw measuring arms for automatic tool measurementInterfaces: USB, PCMCIA card, and RS-232 portInterface for bar feederAutomatic parts catcherDual foot pedal for independent opening and closing of the chucks  ...

LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:7000 mm

Hartner Multi-Step DrillsPrecision reimagined. Efficiency made tangible. Made in Germany.The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use.What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements.Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in the dr ...

LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:10000 mm

x-travel:3500 mmy-travel:2500 mmz-travel:1250 mmw-axis:800 mmbore spindle speeds:2500 U/mintable load:12 tdia. of rotary table:1800 x 2200 mmnumbers of positions in the tool changer:60 ? Overhauled in 2025 and 2026? The spindle was relubricated and new spindle bearings fitted in 2025 by technicians from TOS Varnsdorf? 12-month warranty and guarantee on geometric accuracyScope of repairs to the X, Z and B axes 1. Complete dismantling and cleaning of the machine bed for the X and Z axes as well as the B axis 2. Regrinding of X and Z axis guide ways at Czech manufacturer of CNC horizontal boring machines 3. Removal of the old lining from the X- and Z-axis slides and the B-axis 4. Anchoring of re-grinded X and Z axis machine bed 5. New, hand-scraped lining made from Biplast-V on the X- and Z-axis slides, and from new Biplast-V on the B-axis 6. Installation of ball screws, linear s ...

LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:5000 mm

bore capacity in steel (diameter):50-60 mmarm length:1.600 mmweight of the machine ca.:5-7 tspindle taper MT:wahrscheinlich MK5

LINEAR AXLE:. - Number of moving slides:3 DIMENSIONS / WEIGHTS:. - space requirements length:16000 mm

turning diameter:570 mmturning length:635 mmtravel -x axis:220 mmtravel -z axis:635 mmTorque:240 Nm feed::X: 20m/min; T: 24m/min disc turret:12 fachmain spindle speeds::25-25.000 dimensions of the machine ca.:3210 x 1750 x 1750 mmweight of the machine ca.:5.300 t

LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:12000 mm

turning diameter:500 mmturning diameter over bed:500 mmturning dia. over base-slide:290 mmcentre distance:1000 mmcentre height:250 mmz-travel:1350 mmspeeds:10 - 3000 U/min

LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:5000 mm

groove width:40 mmx-travel:1300 mmthroat:- mmy-travel:150 mmz-travel:200 mmtool taper:SK40 spindle speed::350 ? 4000 upm table clamping surface::1300 x 300 mmweight of the machine ca.:3,5 tCoolant systemDimensions: 1600 mm x 1500 mm x 1800 mm (L x W x H)Hydraulic systemPartially overhauled

LINEAR AXLE:. - Number of moving slides:3 DIMENSIONS / WEIGHTS:. - space requirements length:24000 mm - total weight approx.:10100 kg

groove width:- mmx-travel:1300 mmthroat:- mmy-travel:150 mmz-travel:150 mmspindle speed::50/6000 uprtool taper:SK 40 numbers of positions in the tool changer:8-fach weight:2.500 kgOperating hours: 2,100 hClamping hydraulicsPendulum operation possible8-position tool changer

LINEAR AXLE:. - Number of moving slides:3 DIMENSIONS / WEIGHTS:. - space requirements length:19000 mm

turning diameter:650 mmturning length:1.500 mmchucking diameter:400 mmSpindle diameter at the front bearing: 180 mmSpindle bore: 132 mmMax. speed: 1,800 rpmFixed LynetteOperating hours: 38,500Approx. spindle hours: 1/3 of operating hours

LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:7000 mm

spindle diameter:150 mmx-travel:3.000 mmy-travel:2.000 mmspindle stroke:700 mmdimension of the ram:340 x 340 mmram stroke:700 mmcolumn travel:1.500 mmhigh speed spindle taper ISO:50 bore spindle turning speed range:3,2 - 1.600 U/mintable surface area:2.000 x 2.500 mmmax. table load:25.000 kgrapid traverse speed:5/10 m/minfeed speeds:1 - 1.500 mm/minfaceplate speeds from - to:3,2 - 140 U/mindimensions of the machine ca.:8,4 x 6,8 x 5,9 mweight of the machine ca.:57 ttotal power requirement:100 kWFull B-axisAerostatic guidesCoolant system with IKZ

LINEAR AXLE:. - Movement:3500 mm - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:5000 mm