altre macchine per lavorazione dei metalli usati in vendita (11,285)

RÖHM NC compact clamp RKE-M 125 LV – very good conditionFor sale is a high-quality RÖHM NC compact clamp RKE-M 125 LV, ideal for CNC milling machines and precise clamping tasks.The tensioner is in very good, fully functional condition.Model: RKE-M 125 LVManufacturer: RÖHM, Made in GermanyID No.: 168690 0000 / G 1983Max. clamping force: 40 kNMax. torque: 80 NmParticularly compact designPrecise guidance and high rigidityIncl. crank / hand lever

Lot of taps and threading tools – sizes M18 to M30 – mixed, partly HSS/HSS-E, partly as good as new, partly usedExtensive lot of taps, machine taps and shape/twist drills for metric threads in the range of M18, M20, M22, M24, M27, M30.Manufacturers include: Garant, Holex, Gühring, SKF, Ruko, others. The tools are mostly in neat workshop condition, some with original packaging. Some cutting edges look as good as new, others are used. M18 / M18–6HSeveral machine taps, partly spiral grooveGarant M18 ISO2 X/6HX, in orig. packaging (multiple)Various HSS/HSS-E drills & taps (Gühring, Guarantee/Holex)M20 / M20–6HLarge quantity of different M20 tapsMixed: pre-cutters, center cutters, finishing sawsPartly in protective packaging (Garant, SKF, Ruko)M20 + M22 / Steigung 1.0Machine taps for finethreads Partly as good as new in plastic sleevesM22 / M22–6HVarious taps, some with spiral ...

Voltage 220V +-15% ; 10-130A current range; 25% duty cycle (25c) IP21S; breasts and welding hood; Inverter MMA welding machine; 25% 130A 25.2V ; 60% 84A 23.4V; 100% 65A 22.6V; fan cool; 8165

max. Load capacity per compartment: 2000kg + roof compartment width approx. 2040mm ; total. 5 compartments; for more details see photos of nameplate Dimensions: 2380x1900x1650mm Weight: approx: 1132kg

Used and untested

Gauge block set / Parallel gauge blocks – 87 pieces, quality class 1, in wooden boxcondition • Used • Optically good, neat condition • Gauge blocks clean without recognizable damage • Calibration sticker available (visual inspection) • No current calibration certificate available • No current metrological test carried out • Type: Gage Blocks • Quantity: 87 pieces • Quality class: Grade 1 • Reference temperature: 20 °C • Material: Steel (ground, lapped) • Measuring range: 1 mm – 100 mm • Pitch / gradation: • Fine grading in the lower range • Supplementary final dimensions up to 100 mm • Serial number: 057414 • Standard: Industry-standard final dimension (comparable to DIN / ISO)

Electrostatic filter included Pull-in defective, the conversion to stepper motor (servo motor available) was planned, but not implemented.

Type SL 60240 incl. metal table and various taps. See photos for more details

with approx. 95 HSK-63 tool holders

Partial table with jaw chuck Diameter 200 mm Height 105/265 mm Tip height 105 mm Machine weight approx. 41 kg Space requirements approx. 400 x 330 x 310 m Condition: never used / new (5)

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5)

Working length 2000 mm Working width 360 mm Roll width 360 mm Roll diameter 60 mm Load capacity 800 kg Height adjustment 650 - 950 mm Machine weight approx. 0.045 t Dimensions L x W x H 2.07 x 0.48 x 0.21 m Condition: never used / new (5)

Control: Siemens Acramatic A2100 Di Speed: 6,000 rpm Travel in X/Y/Z: 510/510/510 mm Spindle: Technology: Belt spindle Speed: 6,000 rpm Tool holder: SK40 Work table: Clamping area: 700 x 520 mm Table load (max.): 500 kg General: Tool magazine: 21 stations Rapid traverse in X/Y/Z: 24/24/24 m/min Equipment/accessories: Chip management: chip tray Coolant management: IKZ pump with filter and high pressure Tool Measurement: Pushbutton, Renishaw TS27R Setup operation: Electronic handwheel Other equipment: Div. gebr. Tool holder and 1 pc. machine vice (Allmatic HD 125), transformer ATTENTION: The machine is not wide and is sold as a parts carrier. According to the dispenser, the control (board) is defective.

Manufacturer: System 3RType: Clamping Plate / Grid PlateSystem 3R Clamping Plates Lots – 2 pieces (3R-935-56.40-02 / U-20034)Description:Lot consisting of 2 clamping plates for System 3R clamping systems.The plates have the typical 3R raster pattern for holding chucks, electrode holders and fixtures in tool and mould making. Suitable for use on die-sinking EDM machines and fixtures with System-3R mounting.Manufacturer: System 3RSystem: 3RType: Chipboards / Grid PlatesPlate 1Type: 3R-935-56.40-02Size: approx. 560 × 400 mmPlate 2Type: U-20034Size: approx. 350 × 250 mmMaterial: SteelCondition: used

Machine number: 35-173-98Serial number: 2-0499Compressive force: 4.5 kNStroke: 60 mmincl. transport trolley

Partial table with: - Round and swivel axis - Axles are moved by handwheel - Both axes can be clamped Table diameter 450 mm Swivel range 90 degrees Table height 450 mm Number of T-slots 8 pcs. Machine weight approx. 140 kg Dimensions L x W x H 0.9 x 0.8 x 0.6 m

Pointed rams different more details see photos

KNOLL coolant system and chip conveyor, toolchanger positions: 372, feed rate range (X/Y/Z): 1 – 60,000 mm/min, max. speed rotary table (B-axis): 40 rpm, max. tool weight: 12 kg

HAIMER shrink unit incl. 27 x HSK-63A mounts (HAIMER)

"Machine vise with turntable • Jaw width: approx. 160 mm Product: Machine vise with turntableManufacturer: unknownType / Design: Machine vise, manual, rotatable"

Serial number: 0069Compressive force: 28 kNStroke: 12 mmDelay time: 0.063 secmin./max. operating pressure: 3/6 barTable dimensions: approx. 200 x 150 mmincl. installed punching tool

Includes cabinet key and operating key, Please note: The video is for illustrative purposes only, as are the photos of the screens turned on.

clamping devices in different designs, various parallel panes, see photos for more details Dimensions: 900x800x400mm

Drill vise Jaw width 140 mm Clamping range 140 mm Clamping height 50 mm Weight 17 kg Dimensions L x W x H 500 x 290 x 90 mm Condition: never used / new (5)