altre macchine per lavorazione dei metalli usati in vendita (10,972)

bore capacity in steel (diameter): 2...20 mmthroat: 210 mmbore stroke: 100 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,165 tdimensions of the machine ca.: m- B16 mount (drill chuck taper)- max. drilling capacity: 2 ... 20 mm- distance center drill spindle to column : 210 mm- distance from spindle to table : 400 mm- max. stroke of spindle: 100 mm- adjustment of spindle stock 250 mm- table size: 340 x 280 mm- 4 speeds of drilling spindle: 355 ...2800 per minute- rated power: 1,1 kW- weight: 165 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: - : - power capacity: - kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

basket dimensions: 1200 x 1200 x 700/800 accessories:: 2 x Körbe auf Rollwagen total power requirement: 50 kWPacking: ca. 5,5 x 2,3 x 2,9 mweight of the machine ca.: 3 - 4 tdimensions of the machine ca.: 4 x 4 x 3 mMain machine: approx. 3.4 x 1.9 x 2.9 mTank: approx. 3.5 x 2.2 m2 loading carts for wash baskets: approx. 1.3 x 1.4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 32 mmbore capacity in cast iron GG 20: 38 mmDrilling capacity in St 60: 40 mmthreading in St 60: M 24 threading in GG 20: M 30 Short spindle: MK 3 spindle stroke: 120 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 515 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 117 / 701 mmfeed: von Hand spindle turning speed - stepless: 160 - 2250 U/mintotal power requirement: 1,45/1,9 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 160 kgworkpiece length: 250 mmdiameter: 620 mmtotal power requirement: 0 kWweight of the machine ca.: tdimensions of the machine ca.: mAuswuchtwaage für Schleifscheiben undscheibenförmige PrüfkörperWorkspace: 620 x 250Control: max. Prüfkörpergewicht 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M6 - M36 mmturning speeds: 156 U/minradius: 1200 mmangle adjustable from - to: 0 - 90 Gradweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,4 x 0,1 x 0,7 mElectric tapping machine / 4450136SETFast and precise thread cutting with freely positionable swivel arm- The machine head can be swiveled from 0 to 90 degrees- Quick change chuck with slip clutch for safe thread cutting withoutRisk of breakage- Right-left rotation can be selected on the machine head- Setting of thread size, speed, pitch and cutting depth viaTouchscreen on the swivel arm- Manual mode: the stops after the set cutting depth is reachedSpindle automatic, forward and reverse must be activated manually.- Automatic mode: changes after the set cutting depth is reachedthe machine automatically from the forward to the return - ideal for thatThread cutting of several blind holesIncl. 1 each GT12 M6, M8 ...

table diameter: 700 mmtable load: 0,6 tswivelling range: 0-90 Gradexcentricity: 200 mmtable turning speeds: 0,2 - 2 U/minTorque: max. 900 N/mtotal power requirement: 0,37 kWdimensions of the machine ca.: 1,1 x 0,92 x 0,8 mThe D-HB tilt and turn tables are very stable due to their heavy constructionand therefore particularly suitable for heavy and precisePositioning activities and circular welding work.Features:- Easy installation- Increase in production is made possible- Improvement of the welding quality through optimal positioning andCruise control- Reduction of crane hours and handling time, during which theImproved occupational safety.- Self-locking gear, therefore no leading or trailing behind with eccentricburden- Electronic components from Schneider, Siemens and Delta- Frequency-controlled stepless speed of the turntable- High stability due to the robust construction- CE certifica ...

cutting diameter: 200 - 280 mmband length: 400 - 500 mmstroke: - mmtotal power requirement: 2 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3 LM mPackage 5 x hacksaw / hacksaw machine /untested - partly in need of repair / spare parts carrier- 0278: RUCOCO RBS 280 A / Ø 280mm - automatic machine- 0664: SILISTRA HN 25 M / Ø 250 mm / saw blade 500 mm- 2395: BEHRINGER Super A-275 / Ø 275 / saw blade 450 mm / automatic machine- 3674: BEHRINGER Super 215 PU 2 / Ø 215 / saw blade 400 mm- 5708: KLAEGER / Ø approx. 210 / saw blade 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mmwidth: 2000 mmheight: 350 mmtotal power requirement: - kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: 220,9 mSonderpreis EXWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1200 kgstroke: 3600 mmfork length: 1150 mmbattery: neu in 2022 / 48 Vtotal power requirement: - kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 2 x 1 x 2,4 mDUPLEX MastSide ShifterConnection for auxiliary equipment Battery new in 2022The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: 1150 °muffle size (length): Ø 150 muffle size (width): Ø 150 muffle size (depth): 300 mmtotal power requirement: 3 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 0,8 x 0,5 x 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 750 mmtable width: 550 mmampere: 60 AControl: Makino MGE20 x-travel: 600 mmy-travel: 400 mmz-travel: 250 mmworkpiece weight: 450 kgtool change unit: 8 total power requirement: kWweight of the machine ca.: 5,00 tdimensions of the machine ca.: 3,00 x 3,50 x H3,00 mDie-sinking machine with control MAKINO MGE20The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 1.950 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 467 kg.total power requirement: 15.0 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10,0 barintake capacity: 727 L/minEffective free air delivery: 582 L/minReceiver capacity: 90,0 Ltr.motor: 400 Vpower capacity: 4,0 kWweight of the machine ca.: 91,0 kg.dimensions of the machine ca.: 1040 x 450 x 850 mmDescription :- mobile craftsman piston compressor- High-quality processed, 2-stage compressor block- with 2 cast iron cylinders and optimum efficiency- Finely ribbed cylinder and cylinder head for optimal temperature dissipation- low compressor speed to reduce the compression temperature and minimizing wear and tear- Very low residual oil content in the compressed air thanks to precision piston rings- Generously dimensioned solid rubber wheels and castors at the front- the start-up relief takes place via a mechanical vent valve- powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- all fittings a ...

thread dia.: 20 Mturning speeds: 400 U/minthread: M 4 - M 20 Mworking area: 1900 Rmax.working range: 200 Rmin.Description:The AT models have a radius of up to 1900 mm and theirconstruction a flexible workspace. For professional use.Easy to mount on a worktop.Furnishing:- including 7 thread cutting inserts• M3 20111812 DIN 371 19• M6 20111823 DIN 371 31• M8 20111824 DIN 371 31• M10 20111826 DIN 371 31• M12 20111827 DIN 376 31• M16 20111829 DIN 376 31• M20 20111831 DIN 376 31- Control valve with lubrication- Including air motor- Adapter connection size 2- The cutting head can be pivoted vertically downwards by 90 °- The cutting head is pivoted and rotatable through 360 °- Operating instructions in German without the perforated table as per Fig.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air consumption: 120 m³/hPressure power: 10 barpower requirement: 15 kWPacking: ca. 1,20,81,4 mShipping weight: 300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table-size: - mmvertical movement: - mmon behalf of the customer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool magazin:: 30 Stationen Shipping weight: ? kgPacking: ? mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 220 mmcontrol: Fabnuc OSPL 500 L turning diameter: 150 mmweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 230 V: 200N dimension of workpiece: mmindex-arm vert. adjustable: xx mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3 (VA), 4 (ST 40) mmcutting angle adjustment: 30 - 120 °cutting length: 200 mmthroat: 300 mmtable height: 900 mmwork stroke: max. 40 mmno. of strokes: max. 40 Hub/mintotal power requirement: 4 kWweight of the machine ca.: 2.000 kgdimensions of the machine ca.: 1500x1300x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: max. 700 mm: : max. 1 mm: Cutting capacity structural steel: max. 1 mmCutting capacity aluminum: max. 1 mmCutting capacity stainless steel: max. 0,5 mm: : max. 1 mm: max. 1,5 mmweight of the machine ca.: ca. 150 kgdimensions: 1200 x 400 x 1200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: xxx N0: 270x160x85 mmweight: 13,5 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data • Manufacturer: Komage • Model: S60 CNC • Year of construction: 2011 • Drive: Hydraulic • Press system: Flexible, modular press system based on the ejection method • Operating hours: approx. 20 hours • Total lifts: 3,207 For sale is a Komage S60 CNC powder press in exceptionally good condition. The machine was used exclusively for testing purposes and therefore has only approximately 20 operating hours and 3,207 strokes. The press is in near-mint condition, both technically and visually. There are no significant signs of wear. It is ideally suited for companies seeking a high-quality CNC powder press in virtually unused condition. Equipment • High-performance hydraulic powder press • CNC control • Flexible, modular press system • Ready for immediate use Find more here - .ucymachines/ Contact us at - sales@ucymachines