Vedi dettagli
AMADA EUROPE 258 Tagliatrici per lamiera
usatoVenditore verificato
Richiedi il prezzo
Direttamente al venditore
1 / 8
Dati tecnici
· ID 170425550Tagliatrici per lamiera
- Condizioni
- usato
- Anno di costruzione
- 2001
- Ubicazione
- 9016 St. Gallen
Identifikation
ProduttoreAMADA
ModelloEUROPE 258
Numero articolo57707
Technik
Quantità1
Descrizione
CONTROLS
CNC controls FANUC GE SERIES 18I-P
DESIGN -CUTTING SYSTEM-
auto sheet repositioning: yes
WORKING RANGE -PUNCHING-
total force (nominal): 20 to
sheet thickness max. St37: 6 mm
turret/tool-changer: number of positions: 31
ELECTRICAL SPECIFICATIONS
mains voltage: 400 V
DIMENSIONS / WEIGHTS
space requirements -left/right-: 4890 mm
space requirements -front/back-: 3200 mm
total height: 2200 mm
total weight approx.: 11500 kg
Technical Data:
Year of manufacture: 2001
Punching force: 20 t
Number of simultaneously controlled axes: 3 (X, Y, C)
Pneumatic clamps: 2
Turret speed: 25 rpm
Number of tools: 31
Amada stations: 2 x 1 1/4 inch and 1 x 2 inch
Max. tool diameter: 88.9 mm
Minimum programmable increment: 0.01 mm
Sheet metal processing:
Max. sheet thickness (using ball-transfer elements): 6 mm
Max. sheet thickness (using brush tables): 3 mm
Max. workpiece weight per table: 100 kg
Travel ranges:
Without repositioning: 1,250 x 2,000 mm
With one repositioning: 1,250 x 4,000 mm
Accuracy and performance:
Punching accuracy: 0.1 mm
Positioning accuracy (repeatability): 0.07 mm
Feed speed (X and Y): 82 m/min
Travel length (X): 2,000 mm, (Y): 1,270 mm
Strokes per minute at 25.4 mm feed: X 320 / Y 250
Nibbling rate at 1 mm feed: X 920 / Y 920
Dimensions and connections:
Length x width x height: 4,890 x 3,200 x 2,200 mm
Total weight: 11,500 kg
Oil capacity: 160 l
Power supply: 400 V three-phase, 48 A, 50 Hz
Compressed air: 6 bar
Equipment:
Safety light barrier, brush strips, and ball-bearing table elements. Both processing modes are ready for immediate use.
Note: Tools are not included in the scope of delivery.
The machine has only been in operation for 563 hours.
CNC controls FANUC GE SERIES 18I-P
DESIGN -CUTTING SYSTEM-
auto sheet repositioning: yes
WORKING RANGE -PUNCHING-
total force (nominal): 20 to
sheet thickness max. St37: 6 mm
turret/tool-changer: number of positions: 31
ELECTRICAL SPECIFICATIONS
mains voltage: 400 V
DIMENSIONS / WEIGHTS
space requirements -left/right-: 4890 mm
space requirements -front/back-: 3200 mm
total height: 2200 mm
total weight approx.: 11500 kg
Technical Data:
Year of manufacture: 2001
Punching force: 20 t
Number of simultaneously controlled axes: 3 (X, Y, C)
Pneumatic clamps: 2
Turret speed: 25 rpm
Number of tools: 31
Amada stations: 2 x 1 1/4 inch and 1 x 2 inch
Max. tool diameter: 88.9 mm
Minimum programmable increment: 0.01 mm
Sheet metal processing:
Max. sheet thickness (using ball-transfer elements): 6 mm
Max. sheet thickness (using brush tables): 3 mm
Max. workpiece weight per table: 100 kg
Travel ranges:
Without repositioning: 1,250 x 2,000 mm
With one repositioning: 1,250 x 4,000 mm
Accuracy and performance:
Punching accuracy: 0.1 mm
Positioning accuracy (repeatability): 0.07 mm
Feed speed (X and Y): 82 m/min
Travel length (X): 2,000 mm, (Y): 1,270 mm
Strokes per minute at 25.4 mm feed: X 320 / Y 250
Nibbling rate at 1 mm feed: X 920 / Y 920
Dimensions and connections:
Length x width x height: 4,890 x 3,200 x 2,200 mm
Total weight: 11,500 kg
Oil capacity: 160 l
Power supply: 400 V three-phase, 48 A, 50 Hz
Compressed air: 6 bar
Equipment:
Safety light barrier, brush strips, and ball-bearing table elements. Both processing modes are ready for immediate use.
Note: Tools are not included in the scope of delivery.
The machine has only been in operation for 563 hours.
Richiedi informazioni su questa macchina
La Sua richiesta arriva direttamente al venditore di questa macchina.
