macchine distributrici di bevande usati in vendita (2,108)

Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data Manufacturer: Krones Model: Ergomodul Year of manufacture: 2020 Table pitch diameter: 1,200 mm Rotary plates: 30 Machine pitch: 125.6 mm Main drive: controlled servo motor; Danfoss servo motors, container table Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing hei ...

Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data Manufacturer / model: Krones PRESSANT UNIVERSAL 1N Machine type: container sweep-off depalletizer Year of manufacture: 2023 Application: depalletizing of glass bottles, several formats Container throughput: 14,000 containers/h (machine setting) Pallet format: flat pallets 1,200 x 1,000 mm Container conveyor height: 1,300 mm Sweep-off station: raised design for container heights above 320 mm, SEW servo drive Discharge t ...

Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data Manufacturer: Robopac Model: Helix 4 EVO Year of manufacture: 2021 Machine type: automatic rotating-arm stretch wrapper (pallet winder) Operating hours: less than 500 h Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor Load weight: 10 ...

Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data Manufacturer: Robopac Model: Genesis Futura HS Year of manufacture: 2023 Machine type: automatic rotating-ring stretch wrapper (pallet winder) Operating hours: less than 500 h Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) Pallet size: 800 x 1,200 mm Load height: 1,000 - 2,000 mm (incl. pallet) Load weight: 100 - 1,200 kg Conveyor height: approx. 550 mm; speed 15 m/min Machine height: approx. 4,862 mm; hal ...

Used MEC ISO DPS 12-12-1C bottling line - 2600 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling in 0.33L and 0.5L formats. The line combines filling, carbonation, sterile filtration, CIP cleaning, labeling, date coding and rotary bottle handling equipment for beverage production and industrial packaging applications.Container type: Glass bottlesCompatible formats: 0.33L and 0.5L bottlesFiller: Eurostar ISO DPS 12/12/C counter-pressure filler, 2,600 bphSTS labeling machine: S2T3/R1 front, back and neck labeling with date stamping, 2,500 bphCanellitech wraparound labeling machine: 3,000 bphCondition: Fully refurished in 2022. Filtration: 5 micron, 1 micron and 0.45-micron sterile filtration stagesCIP system: 2 x 350L tanksAdvanced Automation & Control SystemsThe line includes dedicated date-coding equipment, combining the STS int ...

Tetra Pak TBA 19 V10 complete filling lineTechnical Specifications & Performance DataThe Tetra Pak Tetra Brik Aseptic is a used bottling line filling machine for aseptic carton packaging. Built approximately in 1998, this industrial packaging machine is configured for 125 ml Slim Brik containers. Its vertical packaging-web handling arrangement supports the forming, filling and sealing stages required for compact carton packs in dairy product production.Manufacturer: Tetra PakMachine identification: Tetra Brik AsepticApproximate year of manufacture: 1998Machine Hours: 26.000 HoursContainer type: Brik cartonFormat: 125 ml SlimProduct application: Dairy productsFilling technology: Aseptic carton fillingAdvanced Automation & Control SystemsThe machine is equipped with an operator control panel and an electrical/control cabinet for managing operating functions. Visible pneumatic lines, mechan ...

Used Tetra Pak TBA8 1000ml square V110, Helicap 27Technical Specifications & Performance DataThis used bottling line is configured around a Tetra Pak TBA 8 V110 filling machine for square 1.0L Brik carton packs. Manufactured approximately in 2001, the filling machine has approximately 26,000 working hours and received a total refurbishment in 2026. The line includes dedicated screw-cap application, wrap-around tray packing and interconnecting conveyor equipment for an integrated carton packaging process.Filling machine: Tetra Pak TBA 8 V110Pack format: square Brik carton, 1.0LYear of manufacture: approximately 2001Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Conveyors: approximately 30 metres, according to the standard layoutAdvanced Automation & Control SystemsThe line combines filling, cap application, conveying and tray packing into a coordinated indu ...

Used complete craft beer brewery 750LTechnical Specifications & Performance DataThis complete bottling line for beer combines essential packaging machinery for craft-scale beverage production with professional utilities to ensure consistent quality and low oxygen pickup. Engineered for small to mid-size breweries, the line delivers dependable performance in a compact, semi-automatic configuration that supports efficient changeovers and straightforward operation.Production speed: 600 bottles/hour (semi-automatic rinsing - filling - capping operation)Process stages: Bottle rinsing and sanitizing; isobaric-style preparation (vacuum pre-evacuation and CO2 purging); filling and capping; labeling with integrated printingContainer types: Designed for Glass and PET bottle handlingFormats: 0.33L - 0.50LCap type: standard crown capRinsing head: 6 Filling head: 6Capping head: 6 Product compatibilit ...

Used CFT-JORDAN complete fruit and vegetable puree production lineTechnical Specifications & Performance DataThis used bottling line is configured as a complete aseptic filling and processing line for fruit and vegetable purees. It integrates preparation, thermal treatment, deaeration, sterilization, and aseptic bag-in-bin/bag-in-drum filling. Designed for industrial packaging and food-grade production, it offers second hand value with robust stainless steel construction and modular components suitable for continuous operation.Main aseptic filler: MACROPACK TM2000/3Filling performance: up to 90 bags/hour (220.0L) or 30 bins/hour (1000.0L)Processing capacities (typical): crushers 9–15 t/h; enzymatic deactivators 20 t/h; vacuum deaerator 20 t/h; sterilizer 17 t/hThermal equipment: Pasteurizer 1.5 t/h (4000 x 1600 x 2350 mm); Enzymatic Deactivators ETS 20 fast/slow; Sterilizer OLIMPIC TC  ...

Used Tetra Pak A3 Speed V40 250ml Prisma filling lineTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak aseptic carton solution centered on the A3 Speed filler. Engineered for industrial packaging and beverage production, it delivers high output with precise handling of Prisma cartons. All core modules share the same manufacturing year, providing a cohesive and modern second hand system suitable for efficient aseptic operations.Production speed: up to 24,000 packages/hourPrimary format: 0.25L Prisma cartonContainer type: Carton (aseptic brik)Filler: Tetra Pak A3 Speed, version 040V, year 2014, working hours 4,908Accumulator: Tetra Pak ACHX 30, version 070V, year 2014, working hours 5,528Straw applicator: Tetra Pak SA30, version 040V, year 2014, working hours 5,821Case packer: Tetra Pak CBP30 Speed, version 030V, year 2014, working hours 38Filling p ...

Used COMAC can filling line for beer 6000 CPHTechnical Specifications & Performance DataThis complete can bottling line engineered around a Co.Mac filling and seaming monoblock is designed for efficient beverage production in industrial packaging environments. Optimized for carbonated beer, it provides reliable performance for standard can formats with precise isobaric filling and robust quality control. As a used bottling line, it offers second hand value with professional features suitable for modern beverage production.Product: Carbonated beerFilling temperature: 2–4°CCO₂ quantity: up to 5.5 g/LProduction speed (reference): 6,000 cph on 0.33L; 5,500 cph on 0.44LContainer types: Two-piece aluminum cans with SOTCan formats: Compatible with 0.33L and 0.44LDiameter: 66 mmClosure: 202 can endRequired product pressure: 3–4 barRequired water pressure: 3–4 barRequired air pressure: 6 ...

Used PIERALISI oil extraction plant with decanter J2Technical Specifications & Performance DataThis complete olive oil extraction line centers on a Pieralisi J2 decanter and includes upstream preparation and downstream separation for continuous processing. The configuration is engineered for farms, cooperatives, and industrial facilities seeking reliable second hand equipment to integrate upstream of bottling and industrial packaging operations. Manufactured by Pieralisi with complementary stainless steel equipment, the line supports robust operation for edible oil production.Main decanter: Pieralisi J2 decanter centrifugeHourly throughput (decanter): 25–30 ql/hSeparators: 2 centrifugal separatorsMalaxers: 3 malaxers, type SiciliaPreparatory malaxer: 1 unit, capacity 5 qlCrusher: Hammer crusherWasher: Santoro washer in stainless steelDefoliator: Leaf-removal infeed conveyorConstruction ...

Used ALFA LAVAL oil extraction plant 2000 Kg/hTechnical Specifications & Performance DataThis complete olive oil processing line combines proven Alfa Laval separation technology with robust malaxing and preparation equipment to deliver reliable, continuous extraction performance. It is a second hand, industrial processing solution designed to operate upstream of an edible oil bottling and industrial packaging system, making it a strong fit for producers who wish to integrate a used bottling line or expand their beverage production and food oil processing capacity.Hourly throughput: 20 ql/h (approx. 2,000 kg/h of olives)Core equipment: Olive elevator, hammer crusher, malaxer 1 section, malaxer 4 sections, decanter centrifuge, two disc-stack separatorsDecanter centrifuge: Alfa Laval Type LWX 207Bowl diameter (decanter): 355 mmMax solids density (decanter): 1.7 kg/dm3Max bowl speed (decante ...

Used OLIVEROGAR filtration systemTechnical Specifications & Performance DataThis industrial filtration and liquid-processing system is engineered for reliable, continuous operation in beverage production and industrial packaging environments. Designed by Oliverogar, it integrates multi-stage filtration with robust pumping and piping to support a wide range of liquid clarification and polishing tasks. Its compact footprint enables easy placement within existing production areas and seamless connection to upstream and downstream equipment on a used bottling line or new installation.Manufacturer: OliverogarMachine type: Industrial filtration and liquid-processing systemAutomation: Fully automated, multi-stage operationConstruction: Stainless steel frame and process assembliesProcess components: Integrated stainless-steel filtration tanksFluid handling: Heavy-duty process pump and industrial ...

Used BERTOLASO WDT10 washer dryer - Year 2001Technical Specifications & Performance DataThe Bertolaso WDT 10 is an external bottle washer-dryer engineered for reliable operation in beverage production and industrial packaging environments. It combines mechanical brushing with targeted water jets to remove residues on the bottle body, bottom, and closure area, followed by high-energy air-knife drying. This second hand unit is well-suited for integration within a used bottling line and provides robust construction for continuous-duty applications.Model: WDT 10Manufactured by: BertolasoYear: 2001Speed: 3.000 - 5.000 BPH Function: External bottle washing and dryingWashing system: Rotating brushes with directed water jetsDrying system: Seven blower motors with high-velocity air blades/hot airBottle handling: Infeed worm screw; infeed and outfeed star wheelsConstruction: Stainless steel frame  ...

Type of machine: KEG system for depalletizing, washing, filling, capping and palletizing kegs Manufacturer of basic system (cleaner, filling line, CIP): Leifeld+Lemke Manufacturer of pallet transport and robot: Albert Frey Year of manufacture of basic system (cleaner, filling line, CIP): 1990 Year of manufacture of pallet transport: 2000 Year of manufacture of robot: 2015 Output: approximately 130 units of 30 liter kegs per hour Capacity: Designed for 30 liter kegs and 50 liter drums (basket fitting) Main components and their function: - Depalletizing via KUKA robot - Pallet transport including centering frame for empty kegs - Empty pallet magazine - Empty keg transport including fitting screw and turner - Steam-heated external keg washer - KEG pre-cleaner with 7 cleaning stations - KEG main cleaner with 6 cleaning stations and 2 filling stations - Steam-heated CIP system for ke ...

Overview This KOSME Barifill RFC 50-60-10 VKP rinser - filler - capper block, built in 2013, is designed for the rinsing and filling of glass bottles in beverage production lines. The block combines a 50-station single-channel rinser, a 60-valve glass bottle filler with short-tube VKP filling system and a Zalkin CA9 360 NG rotary capping section in one compact stainless steel machine. With approx. 16,000 bottles/hour on 0.75 L and approx. 20,000 bottles/hour on 0.33 L, the block sits in an attractive mid-range capacity class for water, beer, cider, wine and other glass-bottle applications. Integrated foam cleaning supports hygienic operation; the machine is operated via a touchscreen HMI on an articulated suspension arm and is enclosed in transparent protective safety guarding with safety interlocks. The machine is still installed and under power and underwent extensive maintenance in Q4 ...

Panoramica Questo impacchettatore per vassoi è stato prodotto nel 2020 dal produttore italiano Robopac. La macchina veniva revisionata ogni anno, l'ultima manutenzione risale a novembre 2025. È attrezzato per l'imballaggio delle confezioni.    Dati tecnici Tipo: Dimac Laser TX Anno di produzione: 2020 Potenza totale: 20 cicli/min Adattato per la seguente formazione: 2x1 3x1 4x1 Modificato per le seguenti dimensioni dei cartoni: 88 x 177 x 245 mm

Overview  This empty bottle inspector was built in 2009 by the German manufacturer Heuft and is still in operation until the end of October. The machine is available as it is being converted to a new inspection solution as part of a line modernization. The system includes the Heuft InLine reflexx Release 9 empty bottle inspector, the Heuft Spectrum SX TB 72 pre-sorter and the associated Heuft Gateway II for network connection. Interested parties have the opportunity to view the inspection line in operation by prior arrangement. Technical details Output: up to 72,000 bottles per hour Year of construction: 2009 Bottle types that can currently be processed: 0.33 l ale / green / crown caps 0.33 l ale / brown / crown cap 0.50 l NRW / brown / crown cap 0.50 l NRW / clear / screw cap 0.50 l Euro / brown / crown cap 0.33 l Krombacher-Bügel / brown / with embossing 0.50 l swing top / brown Cont ...

Panoramica Questa macchina per l'etichettatura è stata costruita nel 2005 da Gernep. È stata operativa in uno stabilimento di succhi di frutta in Germania fino al 01/2022. In questa azienda veniva utilizzata solo in un turno singolo per circa 100 giorni all'anno, motivo per cui le condizioni della macchina sono ancora molto buone. Specifiche tecniche: Capacità: 6.000 bph in bottiglie da 1L Numero di aggregati: 2 Accessori: Formati per bottiglie di vetro da 1,0 l VdF, 0,7 l VdF, collo di goziere da 0,2 l Bottiglie di vetro Vari pezzi di ricambio inclusi

Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 5,500 bottles/hour Formats: 0.75 L Bordeaux (H=309 mm, Ø74 mm) 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) 1.0 L Schlegel (H=309 mm, Ø89 mm) 0.75 L Burgunder (H=297 mm, Ø82 mm) Application: Labelling of glass bottles (wine) Configuration: Rotary machine with 2 cold glue labelling aggregates Label positions: Body (front), neck ring, back Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of De ...

Overview  This labelling machine was manufactured in 2020 by Gernep. The machine is designed for labelling applications in the juice industry. The machine is currently still installed and under power and can be visited on request. Technical data Capacity: 10,000 bph Application: Juice Configuration: Gernep Labetta 4/3/10 640 2A Labelling technology: Cold glue / Rollina Labelling stations: 2 × cold glue aggregates Bottle Formats Container type: Glass bottles (fruit juice) Typical formats: 1.0 L VDF (H=307 mm, Ø90 mm) 0.5 L NRW (H=260 mm, Ø68 mm) Special capability: Suitable for hot-fill applications Label Data 1st cold glue station: Label length: approx. 25 – 140 mm Label height: max. 150 mm Lower edge: max. 15 mm Upper edge: max. 320 mm 2nd cold glue station (incl. wrap capability): Label length: approx. 25 – 140 mm Up to 170° wrap-around of bottle circumference Label height: ma ...

Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection syst ...

Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L, 11 formats Application: Cold glue labeling of bottles Configuration: 20-head rotary table, 3 labeling aggregates Label positions: Front, back, neck/seal label Utilities: Standard Krones control system Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, D ...

Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 ...

Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. One will be free in June, one in October Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999

Overview  This cold glue labelling machine was manufactured in 2004 by German company KHS. The machine was running until January 2025 and is now stored in the company. The labeller has a camera system for the orientation of the labels in the neck area for swing-top glass bottles. Technical data  Capacity: Up to 26,000 bottles per hour Working direction: anticlockwise Formats: 330 ml Longneck glass bottles 330 ml Steinie glass bottles 330 ml Swing-top glass bottles 500 ml NRW glass bottles Label positions: Front (up to 2 labels) Back (up to 1 label) With a Siemens S7 control New HMI touch panel in 2019

Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999

Panoramica Questa etichettatrice a colla fredda è stata prodotta nel 2008 dall'azienda tedesca Gernep. La macchina è progettata per applicare etichette utilizzando la tecnologia della colla fredda ed è immediatamente disponibile per la vendita. Dati tecnici Produttore: Gernep Modello: Labetta 3/4/10 640 2A Anno: 2008 Direzione di rotazione: Macchina a sinistra (la piastra delle bottiglia ruota in senso antiorario) Capacità nominale: 14.000 bottiglie/ora Regolabile da 3.000 - 15.000 bottiglie/ora 2 unità di colla fredda Posizione delle etichette: Corpo, davanti, dietro Formati di bottiglia: 0,5L Bottiglia NRW 0,33L Bottiglia Vichy 0,33L Bottiglia Ale

Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data Capacity: approx. 40 trays/min Formats: 24 × 0.5 L cans 15 × 0.33 L sleek cans 4 × 6 × 0.33 L bottles 6 × 4 × 0.33 L bottles 8 × 3 × 0.33 L bottles 3 × 6 × 0.5 L bottles Application: Packaging of cans and bottles Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink  ...