macchine distributrici di bevande usati in vendita (2,148)

Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Technical Data Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab Model: Octopus 1800 BFTS Machine Type: Automatic ring pallet wrapper Year of Manufact ...

Overview The dynamic beer filtration system 1VDCF-5-5 was manufactured in 2024 by the German company BECA. The filtration system is used to filter beer. Techn. Data Whole Plant Output: 5 hl/h Filter surface area: 5 m² Condition: as new Weight empty: approx. 800kg (net) + 300 kg (el. cabinet) Dimensions (L x W x H): 2300mm x 1300mm x 2200mm Dimensions electrical cabinet: 1000mm x 800mm x 2000mm Energy requirement: 4kW Energy consumption: 0,7-1,0 kW/hl Temperature increase: 5°C per minute due to ceramic plates Operating pressure: 1-4,5 bar Size of the pores: 200nm Features: High quality beers immediately after start up Higher dry content of the filtered yeast Extremely low energy consumption Low maintenance effort Filtration at low pressure No additional tools or additives required Modular design to increase the capacity in future Integrated CIP system

Panoramica Il seguente mixer a 6 componenti è stato costruito nel 1993 dal produttore tedesco Famix. Il mixer può essere offerto completamente revisionato e in garanzia. La macchina è disponibile immediatamente nelle sue condizioni attuali.  Dettagli tecnici Capacità: max. 30.000 l/h Bevanda a 6 componenti Miscelatore Dimensioni (LxWxH): 3.200mm x 1750mm x 2800mm Misuratore di portata Pompa dosatrice Degassaggio sottovuoto Misurazione Brix misurazione CO2 Controllo della pressione CO2 Misurazione della conducibilità Dati elettrici Tensione operativa 400V/230 V 50 Hz Tensione di controllo 42V AC 

Overview This FAMIX-Falterbaum 20000TD premix system, manufactured in 2000, is a fully automatic beverage mixing and carbonation system designed for continuous dosing, mixing, deaeration and carbonation of beverage components before filling. The system is suitable for the production of mixed and carbonated beverages using components such as water, syrup and CO₂. It is built as a compact stainless steel skid with integrated tanks, pumps, valves, piping, instrumentation and control cabinet. The premix unit has a capacity of approx. 22,000 l/h and includes two vertical stainless steel pressure vessels, which can be used for product deaeration, buffering and carbonation. The liquid flow is controlled via automated pneumatic valves and a manual stainless steel pipe connection panel, allowing flexible routing for production and CIP operation. The machine is operated via an integrated FAMIX c ...

Overview This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Technical data Capacity: 30,000 litres/hour Application: Carbonated mineral water Configuration: Carbonator with pumps, tank, and accessories CO₂ rate: max. 8 g/litre Drive: Siemens S7 Scope of Delivery Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system Pump system  Tank | KHS  Control system | Siemens | S7 

Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Technical Specs  Capacity: approx. 50 hl/h (tandem system, 24h operation) Filtration type: Crossflow (microfiltration) Number of modules: 48 Operating temperature range: 0°C to 70°C Equipment: Pumps, integrated CIP system, complete piping, control system Control system: Siemens S7 with Siemens OP07 HMI Automation level: Fully automatic Equipment ...

Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc

Il sistema di dosaggio Velcorin è stato sviluppato da Lanxess per la preparazione delle bevande. Il sistema dispone di una pompa dosificante che dosa con precisione il conservante Velcorin ed è progettato per uso industriale. Il sistema è già stato smantellato ed è pronto per il ritiro.  Dettagli tecnici Capacità (volume bevande): 6.000 - 36.000 l/h Dosaggio: fino a 20 ml Velcorin / hl Misuratore di flusso Endress + Hauser Ulteriori dettagli su richiesta. 

OVERVIEW This Hermis TP-HRW 20 stainless steel tunnel pasteurizer is a new and unused machine, manufactured in 2025, designed for the pasteurization of beer in 500 ml bottles. The pasteurizer has a capacity of approx. 20,000 bottles per hour and is configured as a 10-zone tunnel pasteurizer with heating, pasteurization and cooling sections. The machine is fully made of stainless steel AISI 304 and is equipped with an external plate heat exchanger for the heating system. The process is controlled by a Siemens S7-1200 PLC with a Siemens Simatic 12 HMI touch panel, allowing automatic control of the pasteurization process. The system is designed for a product inlet temperature of approx. +4°C, a pasteurization temperature of approx. +62°C to +64°C, and an outlet temperature of approx. +34°C to +35°C. The pasteurizer provides a total treatment area of approx. 74 m², with a treatment len ...

Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Technical Details  Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Heig ...

Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operati ...

Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + ...

Overview This crate washer was manufactured by the German company Klotzki in 2011. It is designed for cleaning beverage crates and has been regularly serviced. The machine is immediately available and was last used in a beverage production plant. It shows regular signs of use, but is still in working condition. The operator platform is not included in the scope of delivery. Technical data  Capacity: 1,500 – 2,500 crates/h (adjustable) Treatment time per crate: ~91 sec at 1,700 crates/h, ~65 sec at 2,400 crates/h Crates in machine: 48 pieces Crate format: customizable Running direction: transverse Spray pressure: approx. 4.0 bar Lye tank volume: approx. 1.0 m³ Treatment section length: approx. 34 meters Main pump: 15 kW, 80 m³/h Drive units: Main drive: 0.33 kW Crate infeed: 0.55 kW Crate outfeed: 0.55 kW Dimensions: Length: 3,000 mm Width: 2,000 mm Height: approx. 5,000 mm Crate inf ...

Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data Manufacturer: Krones / Krones Zierk GmbH Model / Type: K6W-25-S-E Machine Type: Crate washing machine Year of Manufacture: 2000 Application: Washing / cleaning of beverage crates Construction: Stainless steel machine housing and frame Conveyor System: Integrated slat-cha ...

OVERVIEW This Krones KES-2-4-312/25-110 bottle washing machine is designed for the industrial washing of returnable glass bottles in beverage production lines. The machine is equipped with 25 bottles per row and has a rated capacity of up to approx. 28,000 bottles per hour. The machine can process bottle formats from 300 ml up to 1,000 ml, making it suitable for breweries, mineral water producers, soft drink producers and other returnable bottle operations. The washing machine is mainly built in stainless steel, with an insulated stainless steel caustic bath and steam heating system. The machine will be delivered completely reconditioned. The reconditioning scope includes the bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station and electrical panel. A test run is also included. The machine is offered with Siemens S7 PLC contro ...

Overview This 5 hl brewhouse was manufactured in 2016 by easybräu. The brewhouse consists of 2 vessels and is designed for beer brewing. It is currently still installed and can be visited at any time. The system is electrically heated; steam heating is possible. Valves are manually operated. The brewhouse is being sold because a larger system has been purchased. The brewhouse is immediately available and can be seen in person upon request. Technical data  Capacity: 5 hl Configuration: 2‑vessel brewhouse, manually operated valves Heating: Electric (steam possible) Temperature control: Yes Recipe management: Recipe storage available Utilities: Electric power (steam optional)

Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery 4 units Brewhouse | Shandong | 20-25HL | 2019 1x mash tun 1x lauter tun 1x boiling or wort tun 1x whirlpool Manual shut-off valves Cooling of fermentation tanks is automated Malt mill | Shandong | 2019 Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 200 kg/ h Oil-fired, but can also be operated with gas by replacing the burner Wort cooler, 2-stage | Shandong | 2019 2x cooling un ...

Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  Capacity: max. 1,500 bph (1,000 bph were actually run)  Bottled product: Beer   Included formats: 0.33l longneck, 0.5l NRW  Closure: Crown cap  Scope of delivery  Bottle washer | SEN | 1989 (overhauled and installed in 2020)  Isobaric filler block | Shandong Yuesheng | 2019   Rinsing positions: 14   Filling positions: 12   Capping positions: 5   With pre-evacuation   Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  D ...

Overview  This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data Filling system: Isobaric (for beer and other carbonated beverages) Capacity: 900 bottles/hour Bottle formats: 0.25 L – 1.0 L Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system Electronic fill height adjustment Stainless steel construction

Overview  This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data  Capacity: 6,000 bph (1.0 l bottles) 7,000 bph (0.75 l bottles) Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) Bottle height: 150–370 mm Number of filling valves: 36 Filling principle: Low-pressure vacuum filling Running direction: Left to right Filling valve type: Electropneumatic Special features: Programmable bottle parameters with automatic adjustment for bottle height and fill level Hot filling capable with auto shutdown at temp ...

Panoramica Questo robot-palletizzatore è stato costruito nel 2014 dal produttore tedesco Kuka. La macchina ha 2 diverse teste di presa per la gestione dei KEG e delle casse di plastica. È dotato di 6 assi ed è in buone condizioni. La macchina è stata revisionata ogni anno e smontata nel 2025. Dettagli tecnici Capacità Dipendono dalla formazione degli strati Equipaggiati per la gestione di: casse Modul di KEG

Panoramica Questo wirehooder è stato prodotto nel 2010 da Robino & Galandrino. Il RECORD 14000 è progettato per l'applicazione di cappe metalliche su bottiglie. La macchina è stata in produzione fino alla fine di marzo 2026 ed è in condizioni di funzionamento. La macchina è stata ispezionata, pulita e lubrificata. Dati tecnici Capacità: fino a 14.000 bottiglie/ora Applicazione: Applicazione cappuccia a fili Configurazione: RECORD 14000 Utenze: 400 V / 3F / 50 Hz / ICC 20 A / IN 4,15 A

Overview This GEA Westfalia GSC15 beer centrifuge, manufactured in 2006, is designed for beer clarification with low oxygen pickup. The machine has a reported capacity of approx. 20 hl/h and is specified with an oxygen pickup of < 10 ppb, making it suitable for breweries requiring gentle clarification with minimized oxygen ingress. The centrifuge is currently still in production and is planned to be decommissioned during 2026. It is installed on a stainless steel skid frame and includes the control cabinet mounted directly on the machine. The system is equipped with stainless steel process piping, pressure gauges, flexible product connections, an ABB drive motor, and an integrated Grundfos pump unit. The control interface is located on the dedicated PLC panel and includes an LCD display, membrane keypad, and emergency stop. Included in the scope are the control cabinet, maintenance tools ...

Übersicht Dieses Sudhaus wurde 2022 von der chinesischen Firma JingYing gebaut. Es wird verkauft, da die aktuelle Brauerei erweitert wird. Es handelt sich um ein dampfbeheiztes 3-Gefäß-Towersudhaus in sehr gutem, gepflegtem Zustand. Die Anlage wird mit Funktionsgewährleistung bei Lieferung angeboten und ist sofort verfügbar. Technische Daten Ausschlagwürze: 10 hl pro Sud Konfiguration: 3-Gefäß-Sudhaus (Maisch-/Würzepfanne, Läuterbottich, Whirlpool) Heizsystem: Dampfbeheizt Steuerung: Halbautomatische SPS (Steuerung von Pumpen, Heizung, Rührwerken, Temperaturprofilen, Rezepteinwahl) Gärung: 10 zylindrokonische Gärtanks à 20 hl (2 bar, Kühlmäntel, CIP-Kugel, Manometer, Probenahmeventile) Kühlung: Kälteaggregat 6 HP (~4,5 kW mechanisch, ~12–18 kW Kälteleistung), Wasser-Glykol-System, Bereich −4 bis +10 °C Dampferzeuger: Elektrisch beheizt, 72 kW (≈1 °C/min für 10 ...

Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  Capacity: 4.000 bph  4 cavities Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  space requirement approx. 22 m² (incl. preform feeding system) Bottles 1,0 l PET 0,5 l PET 0,33 l PET Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor.

Overview  This all-copper brewhouse of type CBS-15 was manufactured by the German manufacturer Wachsmann in 1998 and first put into operation in 1999/2000. It is currently in storage in Bavaria and has recently been professionally overhauled - including new controls and motors. The system is available immediately. The brewhouse is being sold at a much more attractive price than previously invested. Originally, a recommissioning was planned as part of our own brewing project, but this could not be realized due to the lack of a building permit. Technical details  Design: all-copper brewhouse incl. copper-clad smoke pipe and dummy extractor hood Hot wort: 17 hl Pouring: approx. 270 kg Commissioning: 1999/2000 Floor space: approx. 5.25 × 1.80 m (with control cabinet: 2.25 m) Recommended room height: min. 4.2 m Weight (empty): approx. 4,000 kg Control system: renewed after 2017

Overview This rotary vacuum capping machine was manufactured in 2023 by Alwid (Germany). The machine is equipped with three vacuum capping heads and is configured for TO82 twist-off closures on round jars. It is in excellent condition and comes with infeed and outfeed conveyors. The machine is available immediately. Technical data Capacity: approx. 1,000–1,400 jars/h Formats: Round jars Ø77/86 mm, 90 mm height; TO82 twist-off closures Working direction: Right to left Working height: Adjustable from 850 mm Electrical connection: 400 V, 50 Hz, 3-phase/N/PE Capping heads: 3 vacuum heads with torque adjustment via hysteresis clutch Conveyor: 1.5 m infeed + 1.5 m outfeed, stainless steel chain, width 82.5 mm Control: Siemens S7 HMI (German) Construction: V2A stainless steel base, drip tray, capping head unit, CE-compliant safety guarding with Makrolon panels and safety doors Scope of De ...

Overview This RINK KM 690/4K empty bottle unscrewing machine, manufactured in 01/2012, is designed for the automatic removal of screw caps from returnable empty bottles directly inside the crate. The machine is installed in the empty bottle infeed section and removes screw closures before the bottles are transported further towards the bottle washer. The machine is equipped with 4 units, each with 4 x 3 unscrewing heads, allowing multiple bottles to be processed in parallel inside the crate. In operation, the crates are transported continuously under the unscrewing sections. The head units lower cyclically onto the bottles, unscrew the closures and then return to the upper home position. The machine is operated via a Siemens SIMATIC Panel touch display integrated into the stainless steel control cabinet. Technical Data Manufacturer: RINK GmbH & Co. KG Machine Type: Empty bottle unscrewin ...

Overview This RINK automatic screw cap remover (unscrewer) was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before the containers enter the bottle washing process. The machine was installed in a high-capacity returnable glass bottling line with a capacity of approximately 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75 L GDB bottles in 12-bottle crates and includes format equipment for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The installation includes a cap discharge system and blower unit for removing closures from the bottles. The machine was built with modern electrical components and is  ...

Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) ...