69 WEINGARTEN macchina utilizzata in vendita

Pressa eccentrica a colonna singola WEINGARTEN tipo E 40Masch. N. 643/62 Anno di costruzione 1963Capacità di pressione 40 ton. Sporgenza 250 mmApertura del tavolo 150 x 80 e 200 mmArea del tavolo 560 x 460 mmArea dello stantuffo 250 x 200 mmCorsa dello stantuffo regolabile 8-88 mmRegolazione dello stantuffo 63 mmAltezza di installazione 320 mmForo per perno 40 mmFrequenza di corsa 100/130 colpi / min. Potenza motore 2,2 / 3 kWNetz collegamento 400 volt, 50 HzAltezza tavola dal pavimento 840 mm- Combinazione frizione-freno di WEINGARTEN giunto filettato a frizione con PMS

Colonna singola - pressa eccentrica WEINGARTEN tipo ERV 40Masch. N. 537 / 65 Anno di costruzione 1965Forza di compressione 40 ton. Sporgenza 230 mmDimensioni della tavola 570 x 470 mmArea dello stantuffo 250 x 200 mmForo del perno di serraggio 40 mmAltezza di installazione max. 520 mmRegolazione della corsa 8 - 88 mmCampo di regolazione del pistone 63 mmFrequenza della corsa 70 colpi al minutoPotenza di azionamento 3 kWNetz collegamento 380 volt, 50 Hz- Regolazione dell'altezza del tavolo- Protezione da sovraccarico tramite piastra di schiacciamento- Combinazione frizione-freno tramite giunto filettato a frizione WEINGARTEN-

Colonna singola - pressa eccentrica WEINGARTEN tipo ER 63Masch. N. 52A / 63 Anno di costruzione 1963Capacità di pressione 63 ton. Sporgenza 280 mmSuperficie del tavolo 630 x 530 mmCorsa dello stantuffo regolabile 8-100 mmRegolazione dello stantuffo 63 mmFrequenza di corsa 65 colpi / min. Potenza del motore 4 kWCondimento elettrico 380 Volt, 50 Hz- Combinazione frizione-freno tramite frizione filettata a frizione WEINGARTEN- Sblocco elettrico della corsa tramite interruttore a pedale- Contaruote- Protezione da sovraccarico tramite piastra di schiacciamento- Alberi motore anteriori Cuscinetto di supportoIngombro L x P x A 1500

vedere l'immagine nell'appendice

Weingarten AR 63 tonCapacità: 63 ton Corsa massima regolabile: 8 > 100 mm Velocità di trafilatura: 56/84 str/min Dimensioni del tavolo: 620 x 500 mm Diametro foro tavola: 250 mm Diametro portapunzone: 40 mm Regolazione della corsa: 63 mm Peso: 4 ton

CONTROLS   conventional PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 100 to SLIDE   slide force: 100 to   stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes for safe tools only

Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown

Forza di pressione: 100t, corsa: 60/min, corsa del ram: 8mm-137mm, regolazione del ram: 80mm, profondità della gola: 375mm, dimensioni del tavolo X/Y/Z: 800mm/630mm, dimensioni macchina X/Y/Z: circa 1500mm/2400mm/3500mm, peso: circa 8800kg. È possibile un'ispezione in loco.

Forza di pressatura: 3150kN, dimensioni tavola X/Y: 2500mm/1600mm, corsa (fissa): 280mm, frequenza di corsa: 20-80strokes/min, peso: circa 68000kg. Compreso il trasferimento Dreher e la linea di alimentazione. Il sistema di controllo è difettoso. Documentazione disponibile. È possibile un'ispezione in loco.

Pressione: 25 Gola: 200 mmCorsa: mmPressione: 25 tno. Numero di corse: 140 Mozzo/minfinestra nel telaio: 240 mmRegolazione della corsa: 8...80 mmRAM - Campo di regolazione: 50 mmSuperficie del pistone: 355 x 220 mmDimensioni della tabella: 560 x 400 mmForo nella tavola: 160 mmPotenza totale richiesta: 3 kWPeso della macchina ca.: 2,23 tDimensioni della macchina ca.: m- distanza della slitta della tabella: 250 mmI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

pressure: 40 t throat: 240 mm stroke: 8-88 mm no. of strokes: 57/86 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 240x200 mm hole in the table: Ø100 mm table height: 840 mm tool hole in ram: Ø40 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 280 mm stroke: 8 - 112 mm no. of strokes: 30 - 120 Hub/min distance table/ram, max. stroke up, adjustment up: 500 mm table surface area: 840 x 580 mm hole in the table: 150 mm table height over floor: 910 mm passage to the back: 640 mm ram surface: 560 x 300 mm ram adjustment: 80 mm power capacity: 7,5 kW total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 1,4 x 2,3 x 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 280 mm stroke: 8 - 100 mm no. of strokes: 65 Hub/min ram adjustment: 63 mm table surface area: 620 x 500 mm distance table/ram, max. stroke up, adjustment up: 415 mm hole in the table: 230 mm table height over floor: 800 mm ram surface: 310 x 255 mm power capacity: 5,5 kW total power requirement: kW weight of the machine ca.: 3,95 t dimensions of the machine ca.: 1,20 x 1,80 x 2,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacità della pressa: 30 ton Profondità della gola: 160 Corsa del pistone regolabile: 20 - 45 mm Regolazione della slitta: 10 / 60 mm Altezza di chiusura (corsa verso il basso, regolazione verso l'alto): 220 mm Superficie del tavolo: 470 x 300 mm Area della guida: 250 x 190 mm Numero di corse: 80 - 240 s.p.m. Potenza richiesta: 4 kW Dimensioni L x P x A: 1.400 x 1.800 x 2.000 mm Peso della macchina circa: 2,67 ton

pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...

pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 860x620 mm ram surface: 540x360 mm hole in the table: Ø 270 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm dayligth: 700 mm Table area: 1600x1400 mm ram surface: 1400x1150 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 170 mm stroke: 6-60 mm no. of strokes: 160 Hub/min ram - range of adjustment: 40 mm table surface area: 420x320 mm ram surface: 180x140 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 32 mm weight of the machine ca.: 1 t dimensions of the machine ca.: 1200x1200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 280 mm stroke: 8-112 mm no. of strokes: 55 / 82 Hub/min ram - range of adjustment: 80 mm table surface area: 800x570 mm ram surface: 560x355 mm hole in the table: Ø 280 mm table height: 800 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1600x2200x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 330 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 850x600 mm ram surface: 550x360 mm hole in the table: Ø 240 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1300x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressione: 100 t gola: 415 mm corsa: 8-140 mm n. di corse: 48 mozzo/min ram - campo di regolazione: 80 mm superficie tavola: 920x670 mm superficie ram: 700x450 mm altezza tavola: 800 mm foro utensile nella ram: 50 mm peso della macchina ca.: 8 t dimensioni della macchina ca.: BxTxH 1500x2000x2800 mm