fresalesatrici e centri di lavoro usati in vendita (3,248)

bore capacity in steel (diameter):55 mmarm length:1600 mmtotal power requirement:4 kWweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm

arm length:1600 mmweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm

Column drill with: - Feed via handwheel - Spindle speeds via belt drive Drilling capacity in steel 32 mm Projection 300 mm Drilling stroke 140 mm Recording MK 3 Table size 380 x 360 mm Feeds via handwheel Speed 85 - 1100 rpm Total power requirement 1.3 KW Machine weight approx. 0.27 t Dimensions L x W x H 0.95 x 0.6 x 1.92 m

equipped with automatic cooling system; unused; in suitcase; 5637

Column drill with: ARBO/CE approved protective cover. Quick-release chuck with pin. Tilting work table. Deep stop. Ejection wedge. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 120 mm Spindle mount MK 4 MK Table: 290 x 270 mm Column diameter 92 mm Speed 150 - 2450 rpm Total power requirement 1.1 kW Machine weight approx. 95 kg Dimensions L-W-H 0.66 x 0.8 x 1.7 m Condition: never used / new (5)

Drilling and milling machine with - Variable spindle speed - Digital depth display - Left/right switch - Cross support - Swivelling spindle head - Feeds via hand crank - Tool case with contents Drilling capacity in steel 13 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 13 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 160 mm Table clamping area 500 x 140 mm Connection voltage 230 V Total power requirement 0.5 kW Machine weight approx. 0.06 t Space requirement approx. 0.6 x 0.45 x 0.76 m Attention: Machine is without digital display! Condition: never used / new (5)

Drilling capacity in steel 40 mm Projection 230 mm Drilling stroke 130 mm Mounting MK 4 MK Table size 400 x 315 mm Speed 105 - 1257 rpm Total power requirement 2.55 KW Machine weight approx. 0.32 t Dimensions L x W x H 0.8 x 0.6 x 1.95 m

Throat depth: 180 mm

Facilities Two-stage gearbox via flat belt (no longer plastic gears) Infinitely variable speed range Quill fine feed via switchable handwheel Digital quill depth display Right-left rotation Robust dovetail guides with adjustable wedge strips Bellows covers for the guideways Adjustable control panel Chip protection with safety circuit Machine base optional. Drilling capacity in steel 25 mm Projection 185 mm Drilling stroke 50 mm Spindle mount MK 3 Spindle speeds: 50 - 2500 rpm Table adjustment transverse 178 mm Table adjustment longitudinal 480 mm Table clamping area 700 x 180 mm Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 160 kg Space requirement approx. 0.75 x 0.8 x 0.9 m Condition: never used / new (5)

Pneumatic Tapping Machine Version with an adjustable angle, horizontal tapping possible Tapping machine for M3 - M16 threads, angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M16 Speed infinitely variable 250 rpm. Working pressure 6 - 8 bar Working range max. 1200 mm Weight 22 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5)

Drilling capacity 16mm Drilling stroke 90mm Recording MK2 Projection 175mm Speed 200 - 1500rpm Connection voltage 400Volt Table of swivel and swivel Condition: unchecked (6)

with swivelling work tableTable dimensions: approx. 200 x 195 mmSpeed range: 220 - 2450 rpmNominal speed: 1400 rpmincl. a small machine viceJaw width: approx. 65 mmReference: Hansmann - Lot 10

Quill stroke: 200 mm, spindle holder: MK4, projection: 350 mm, column diameter: 175 mm

Drive with Lenzue frequency converter

Tapping machine Thread diameter 3 - 10 mm Speed tool 120 - 600 rpm Table size 250 x 350 mm Projection 250 mm Operating voltage 380 V Thread length 80 mm Total power requirement 0.55 kW Machine weight approx. 0.35 t Space requirement approx. 0.7 x 0.7 x 1.9 m Condition: unchecked (6)

Drilling and milling machine with Powerful 2-speed engine. Recording MC 3 - B16. Drill chuck 3 - 16 mm. Left/right switch. Spindle protection. Fine tuning. Ejection wedge. Clamping threaded rod for tool Related tools. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 425 mm Table clamping area 700 x 210 mm Connection voltage Vmax. Distance between work table and spindle nose 470 mm Total power requirement 1.5 kW Machine weight approx. 230 kg Dimensions approx. 0.75 x 1.05 x 1.2 m Condition: never used / new (5)

Electric tapping machines for M3 - M16 threads. Incl. connection for cutting oil supply Angle adjustable. Quick-change chuck with slipper clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Optional: Clamping table with grooves Type: FL-WB Thread diameter M3 - M16 metric Speed infinitely variable 300 rpm. Working range max. 1100 mm Motor power 0.6 kW Weight 30 kg Dimensions L x W x H 700 x 600 x 200 mm Condition: never used / new (5)

Pneumatic Tapping Machine Version with an adjustable angle, horizontal tapping possible Tapping machines for M3 - M12 threads, angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M12 metric Speed infinitely variable 400 rpm. Working pressure 6 - 8 bar Working range max. 1100 mm Weight 20 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5)

Drilling machine with: Feed 2 gears Left/right rotation Footswitch Coolant Pump Machine Light Drilling capacity in steel 40 mm Projection 345 mm Drilling stroke 200 mm Table clamping area 720 x 560 mm Speed 60 - 765 rpm Feed rate 0.15 - 0.2 - 0.3 - mm/rev Tool holder MK 4 Total power requirement 3.0 kW Machine weight approx. 0.4 t Condition: unchecked (6)

Column drill with - Right-left run - Threading - Coolant - Emergency stop Drilling capacity in steel 50 mm Projection 300 mm Drilling stroke 250 mm Spindle diameter 60 mm Spindle mount MK 5 Spindle speeds 18 - 1400 rpm Number of speeds: 12 levels Feeds 0.1 - 1.6 mm/rev Number of feeds 9 stages Table clamping area 500 x 500 mm Spindle motor 4 kW Total power requirement 4.2 kW Machine weight approx. 1.5 t Space requirement approx. 1.2 x 0.8 x 2.55 m

Drilling/milling machine with: • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 700 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1/1.5 kW Condition: never used / new (5)

Controllo Fanuc OM Distanze di corsa X/Y/Z: 450 x 300 x 400 mm Dimensione del tavolo 600 x 300 mm Velocità del mandrino 8.000 min-1 Caricatore utensili per 16 Wkzg. SK 30

STARRAG-HECKERT HEC 630F Centro di lavorazione orizzontale Anno di costruzione 2017 Controllo SIEMENS 840 DSL-711 Escursa X - 850 mm / Y - 750 mm / Z - 850 mm Orari di apertura circa 25.719 (a maggio 2026) Ore di fuso circa 8.451 (a maggio 2026) Attrezzatura: Bloccare l'idraulica. 6 canali, 90 bar alla stazione di allestimento e nell'area di lavoro Portautensili modificato, HSK-A 100 con caricatore a catena con 45 posizioni di memoria Filtro in pile dell'unità di raffreddamento Controllo della temperatura del liquido di raffreddamento, inclusa la compensazione della temperatura Aumento della pressione del liquido refrigerante a 80 bar Raffreddamento del processo tramite alimentazione interna di liquido refrigerante il perno di lavoro con aria compressa invece del liquido refrigerante Doccia a cascata Pistola per risciacquo Piattaforma di serratura con un'altezza d ...

È disponibile un centro di lavorazione Fadal CNC a 4 assi. Posizioni utensili: 21, conico del mandrino: CAT40, potenza del motore: 11kW, velocità: 7500rpm, corsa X/Y/Z: 762mm/406mm/508mm, dimensioni del tavolo X/Y: 990mm/406mm, carico massimo del tavolo: 900kg, rotazione rapida: 15m/min, velocità di avanzamento: 6m/min, precisione di posizionamento: +/-0,005mm, ripetibilità: +/-0,0025mm. Dimensioni della macchina X/Y/Z: circa 2500mm/2300mm/2600mm, peso: circa 3500kg, controllo: Fadal CNC 88HS. Con la macchina venivano prodotti solo pezzi di plastica. Documentazione disponibile. È possibile un'ispezione in loco.

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Loewe / FW, Adjustable machine reamers, 11 pieces -Diameter: Ø 35 to 65 mm -Recording: MK3/MK4 -Submission/Price: complete -Transport dimensions: 520/400/H80 mm -Weight: 27 kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with drill blade Ø 60.5 mm -Reamer: Type H3 52.1-65 -Recording: MK4 -Dimensions: Ø 60 x 425 mm -Weight: 2.3 kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with drill blade Ø 55.2 mm -Reamer: Type H3 52.1-65 -Recording: MK5 -Dimensions: Ø 55 x 315 mm -Weight: 2.3 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve -Morse taper sleeve: Extension sleeve MK5 -Dimensions: Ø 52/340 mm -Weight: 2.8 kg