lavorazione della lamiera usati in vendita (3,275)

sheet width: 2035 mmplate thickness: 4,5 mm STthickness at Niro-steel: 3,0 mm VAbending angle max.: 0 - 135 °daylight opening: 100 mmback stop - adjustable: 70 - 600 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4145 kgdimensions of the machine ca.: 3300 x 1550 x 1900 mmDescription .- Full hardened structure- BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand- with manual backgauge, adjustable from behind- Electronic components are quality components from SCHNEIDER- electrical cabinet is integrated in the side stand- Adjustment of the hydraulic pressure to the material thickness- Adjustment of the material thickness on the bending beam is easy with a mm scale- Handle for adjusting the material thickness on the upper beam is hidden in the side stand- Segmented upper cheek The data for this ad was cr ...

sheet width: 2540 mmplate thickness: 4,5 mm STthickness at Niro-steel: 3,0 mm VAbending angle max.: 0 - 135 °daylight opening: 100 mmback stop - adjustable: 70 - 600 mmtotal power requirement: 5,5 kWweight of the machine ca.: 6275 kgdimensions of the machine ca.: 3900 x 1700 x 1900 mmDescription .- Full hardened structure- BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand- with manual backgauge, adjustable from behind- Electronic components are quality components from SCHNEIDER- electrical cabinet is integrated in the side stand- Adjustment of the hydraulic pressure to the material thickness- Adjustment of the material thickness on the bending beam is easy with a mm scale- Handle for adjusting the material thickness on the upper beam is hidden in the side stand- Segmented upper cheek The data for this ad was crea ...

sheet width: 1050 mmplate thickness: 1.50 mmdaylight opening: 100 mmbending angle max.: 135 °height: OW 100 mmtotal power requirement: manuell weight of the machine ca.: 330 kg.dimensions of the machine ca.: 1600 x 900 x 1450 mmEquipment:- robust, manual swivel bending machine- divided upper tool - lower and rear tool Height of upper tool = 100 mm Division 100/100/100/100/100/100/100/70/60/50/40/30/100 left + right with horn tool- upper tool with quick-change system- quick foot clamp- angle stop - lockable- manual rear stop 500 mm- machine can be moved (rollers)- accessories box - rear Pictures show identical machine (UFA 1212)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spessore della piastra: 2,0 mmdiametro del tubo: 60,0 mmmotore: 400 VoltI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

: 6,5 mm ST 40: 3,5 mm VA: 90° Gradblade length: 250 x 250 mmtable:: 810 x 750 mmwork height max.: 950 mmengine output: 4,0 weight: 630 kgrange L-W-H: 810 x 750 x 1150 mmCharacteristics :- Notching with a burr-free cut, without deformation of the cut edges- Blades made of surface-hardened tool steel- Operation by means of a foot pedal, so both hands are free for the workpiece- Large dimensioned work table with built-in scales- T-slots for precise guidance of the swiveling stops- Protective cover in front of the cutting blade for high securityscope of delivery- 1 set of cutting knives- 2 swiveling material stops- Plexiglas protective cover- Foot pedal with emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6.0 mm ST 40: 3.0 mm VA: 30 - 140 Gradblade length: 200 x 200 mmtable:: 900 x 990 mmwork height max.: 940 mmPunching capacity: 35.0 in 6.0 mm ST 40Throat / punching unit: 135 mmengine output: 4.0 kWweight: 1020 kgrange L-W-H: 900 x 990 x 1200 mmCharacteristics :- Notching with a burr-free cut, without deformation of the cut edges- Blades made of surface-hardened tool steel- Operation by means of a foot pedal, so both hands are free for the workpiece- Large dimensioned work table with built-in scales- T-slots for precise guidance of the swiveling stops- Protective cover in front of the cutting blade for high securityscope of delivery- hydraulic Notching machine with adjustable angle & punching station- 1 set of cutting knives- Round punch with die 12 mm- 2 swiveling material stops- Plexiglas protective cover- Foot pedal with emergency stopThe data for this ad was created with ModulMWS - ...

: 3.0 mm ST 40: 2.0 mm VA: 90.0 Gradblade length: 130 x 130 mmtable:: 640 x 460 mmwork height max.: 900 mmengine output: pneumatisch weight: 200 kgrange L-W-H: 600 x 670 x 1270 mmProperties:- Notching with burr-free cut, without deformation of the cutting edges- Machine body made of high-quality gray cast iron, base made of sheet steel- Cutting blades made of surface-hardened tool steel- Effortless work thanks to pneumatic drive- Operation using a foot pedal, so both hands are free for the workpiece- Large work table with integrated scales- T-slots for precise guidance of the pivoting stops- Protective cover in front of the cutting blade for high safetyScope of delivery- 1x set of cutting blades- 2x pivoting material stops- Plexiglas protective cover- Foot pedal- Base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mmthroat: 260 mmdistance between roll centers: 92.0 mmweight: 295 kgrange L-W-H: 1200 x 700 x 1200 mm Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- 3x pairs of beading and flanging rollers included in delivery- robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- for the economical production of a wide variety of bead types- high accuracy thanks to precision-mounted shafts- Clearly arranged switching elements- Base frame equipped with storage compartment- powerful drive motor, even under continuous load- mobile foot switch for clockwise and counterclockwise rotationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mmthroat: 260 mmdistance between roll centers: 132 mmstroke: 55.0 OW mmtool adaptor: Ø 35 mm, 12 mm Nut mmtotal power requirement: 3.0 kWweight of the machine ca.: 450 kg.range L-W-H: 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- 3x pairs of beading and flanging rollers included in delivery- robust beading machine with motor-driven rollers- hydraulic adjustment of the upper roller, with pressure gauge- Lower shaft with adjustable stop- for the economical production of a wide variety of bead types- high accuracy thanks to precision-mounted shafts- Clearly arranged switching elements- Base frame equipped with storage compartment- powerful drive motor, even under continuous load- mobile foot switch for clockwise and counterclockwise rotationThe data for this ad was created wit ...

plate thickness: 1.20 mm STShaft length: 140 mmroll diameter: 62.0 mmthroat: 100 mmroll speed: 16.0 + 32.0 U/minengine output: 0.75 kWweight: 135 kgrange L-W-H: 900 x 450 x 1350 mm Display machine - like new Never been used () Special price upon requestFeatures:- 8 pairs of beading and flanging rollers included- Robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- For economical production of a wide variety of bead types- High accuracy thanks to precision-mounted shafts- Clearly arranged control elements- Manual adjustment of the upper roller- 2 bending speeds- Powerful drive motor, even under continuous load- 1 mobile foot switch for forward and reverse rotation- Machine base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mm STshaft length: 250 mmroll diameter: 96.0 mmthroat: 160 mmroll speed: 6.0 + 13.0 U/min.total power requirement: 1.5 kWweight: 350 kgrange L-W-H: 1400 x 550 x 1120 mm Display machine - like new Never been used () Special price upon requestFeatures:- 4x pairs of beading and flanging rollers included- Robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- For economical production of a wide variety of bead types- High accuracy thanks to precision-mounted shafts- Clearly arranged control elements- Manual adjustment of the upper roller- 2x bending speeds- Powerful drive motor, even under continuous load- 1x mobile foot switch for forward and reverse rotation- Machine base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm STshaft length: 140 mmroll diameter: 62.0 mmthroat: 100 mmtotal power requirement: manuell kWweight of the machine ca.: 50.0 kgdimensions of the machine ca.: 560 x 220 x 500 mm Display machine - like new Never been used () Special price upon requestDescription:- 8 pairs of beading and flanging rollers included- For the economical production of a wide variety of bead types- High accuracy thanks to precision-mounted shafts- Lower shaft with adjustable stop- Sturdy cast iron construction with a modern design- Expanded application range thanks to 8 different, optionally available roller pairs- Adjustable upper shaftThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mmthroat: 270 (140) mmdistance between roll centers: 60.0 mmtotal power requirement: manuell kWweight of the machine ca.: 46.0 kgdimensions of the machine ca.: 600 x 250 x 500 mmFurnishing:- various replacement rollers- hand crank- front stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdown holder: 18 Stückno. of strokes: 15 Hub/minoil volume: 150 ltr.cutting angle: 1,2 °control: CYBELEC Cybtouchback stop - adjustable: 1000 mmwork height max.: 800 mmengine output: 11,0 kWweight: 8.100 kg.range L-W-H: 5000 x 2410 x 1650 mm-------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------Furnishing: - CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trave ...

sheet width: 2040 mmplate thickness: 3.0 mmthickness at Niro-steel: 1.5 mmno. of strokes: 50 Hub/mincutting angle: 1.4 Gradtable height: 750 mmdistance between columns: 2120 mmback stop - adjustable: 1.0 - 550 mmcolumn arm: 100 mmControl: manuell engine output: 5.5 kWweight of the machine ca.: 2050 kg.range L-W-H: 2600 x 1980 x 1400 mmFurnishing:- robust / motorized swing-cut guillotine shears- Shatterproof, torsion-free steel welded construction- compact and clear mechanical design- manual backgauge, with analogue position display adjustable from the front Continuous adjustment over the entire travel range Adjustment range 1.0 - 550 mm- Machine side stand with projection .. 100 mm- manual cutting gap adjustment- 1x hold-down bar- 1x long side stop- 2x support arms- 1x freely movable foot switch- rear sheet metal slide- 2x EMERGENCY stop buttons at the front- Connection cable including p ...

pressure: 60.0 tchamfer lenght: 2100 mmdistance between columns: 1700 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmoil volume: 150 ltr.voltage: 400 Volttotal power requirement: 7.5 kWweight: 5640 kgrange L-W-H: 3250 x 1960 x 2750 mm-------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA 53T (touchscreen)- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 stop fingers- controlled axes Y1 - Y2 - X - R - C (crowning)- electr. Crowning controlled by CNC- Upper deer foot tool with PS 135.85-R08, system A with quic ...

sheet width: 2100 mmplate thickness: 6,0 mm ST 42thickness at Niro-steel: 4,0 mm VAcutting angle: 1,2 Gradno. of strokes: 28 Hub/minoil volume: 150 ltr.down holder: 11 Stückcontrol: CYBELEC CybTouchengine output: 11,0 kWback stop - adjustable: 1.000 mmtable height: 800 mmweight: 4.500 kgrange L-W-H: 3.010 x 2.100 x 1.640 mm-------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------Furnishing: - CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up a ...

Faceplate bending machine, faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine -Diameter faceplate: 1330 mm -clamped disc diameter: 775 mm -for an additional charge: other discs can be produced -Gear motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

punching pressure: 45.0 tpunch diameter: 22 in 15.0 mmpunch diameter: 38 in 8.0 mmround bar steel: 30.0 mmsquare edge steel: 25.0 L-beam: 100 x 10.0 mmshear: flat material: 300 x 12.0 mmadjustment of stroke: 0 - 55 mmwork height max.: 940 / 1140 mmstrokes per minute: 34 punch diameter: max. 110 mmvoltage: 400 Vtotal power requirement: 4.5 kWweight: 1245 kgdimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon requestFeatures:- Robust electro-hydraulic profile steel shear- With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station- Continuously adjustable stroke- Very compact design- Support table at the notching and punching station- Side support surfaces- 1x freely movable foot switch- Central lubrication system- Connection cable + connectorThe data for this ad was created with ModulMWS - the softwa ...

pressure: 30.0 tpunching cross-cut in cmm: 30.0 in 9.0 mmstroke: ca. 35 Hub/minthroat: 610 mmstroke - stepless adjustable: 0 - 28.0 mmoil volume: 35.0 lwork height max.: 1010 mmtotal power requirement: 4.0 kWweight of the machine ca.: 1200 kg.range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies)Furnishing:- electro-hydraulic hole punch, with large throat- Material/sheet metal scrapers including scraper plates- Large material support table, with adjustable depth stops- continuous stroke adjustment- freely movable foot switch including protective cover- Forklift pockets for easy transport- side storage area- lots of accessories + tools - including tool cabinet- Matrix base (for special size matrices)- Stamp holders (for special size stamps)- original user manuelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

pressure: 70.0 tpunching cross-cut in cmm: 27 in 20 mmpunching cross-cut in cmm: 32 in 14 mmwork height max.: 1060 mmcolumn arm: 500 mmweight of the machine ca.: 1500 kg.total power requirement: 7.0 kWrange L-W-H: 1550 x 1200 x 1950 mm good / well-maintained condition () New price approx. 21.000 euros Special price on requestEquipment:- electro-hydraulic hole punch, with large projection- large GEKA stop table with movable stop system- sheet metal stripper with stripper plates- stepless stroke adjustment- die base- 1x freely movable foot switch- operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tpunching cross-cut in cmm: Ø 31 in 25 mmstroke: 10 - 50 mmcolumn arm: 510 mmwork height max.: 1100 mmno. of strokes: 14 - 45 Hub/minpunch diameter: max. Ø 90.0 mmoil volume: 103 ltotal power requirement: 7.5 kWweight of the machine ca.: 2400 kg.range L-W-H: 1750 x 1020 x 2050 mm maintained condition () New price without accessories approx. 25.000 euros Special price on request Furnishing:- heavy / robust electro-hydraulic hole punch, with large throat- Punching station with material/sheet metal scraper- stepless stroke adjustment .. 10-50 mm- freely movable foot switch including protective cover- hydraulic low pressure finder for foot switch operation- Crane hanging eye for easy transport- side storage area- Hydraulic unit, integrated- Three-phase motor, 400 volts, 50 Hz- original instruction manualThe data for this ad was created with ModulMWS - the software solution of ...

pressure: 80,0 tpunching cross-cut in cmm: 31,0 in 25 mmshear: flat material: 500x18 / 300x22 mmL-beam: 150 x 12 mmround bar steel: 50 + 25 mmsquare edge steel: 50 + 30 mmthroat: 510 mmblade length: 500 mmwork height max.: ca. 1.100 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 2000 x 1000 x 2100 mm from a maintenance workshopFurnishing:- Robust electro-hydraulic combined profile steel shears- Notcher, hole punch, bar steel knife, profile knife and tin snips- Stop table at the hole punch, with blank holder- Stop table at the notcher- 2x floating footswitches- Stroke adjustment for fast stroke sequence- 1x PEDDINGHAUS contact length stop: 1.000 mm- Safety devices- Operating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 205 mmside roll diameter: ~ 195 mmControl: konv. oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 5.5 kWweight: 3200 kgrange L-W-H: 4500 x 1500 x 1300 mmFeatures:- Robust electro-hydraulic 3-roll bending machine- 3-roll concept offers a wide range of bending and rounding options- Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks- Diameters of up to 1.1 times the top roll diameter are possible- Forged and hardened rolls with a hardness of 53-55 HRC- Low-maintenance, stable machine design- Sturdy welded steel construction- Electro-hydraulic folding bearing for easy pipe removal- Pressure gauge / pressure indicator for the rolls- Safety device (safety lanyard with switch unit)- Operating instruc ...

sheet width: 3100 mmplate thickness: 13.0 mm STpre-bending: 10.0 mm STdiameter of upper rolls: 300 mmside roll diameter: 270 mmbending speed: 4.5 m/minvoltage: 415 Vtotal power requirement: 11.0 kWweight: 8200 kgrange L-W-H: 5090 x 1620 x 1630 mm Current new price including accessories approx. 100.000 Euro Special price upon requestEquipment:- Robust electro-hydraulic 3-roll bending machine- Induction-hardened rolls- Robust machine body + stable welded construction- SIEMENS ELGO digital position indicator Position indicator for the two side rolls- Freely movable control panel- Curved side roll feed- Electro-hydraulic conical bending device- Electro-hydraulic safety chuck- Pressure gauge/pressure indicator for the rolls- Operating instructions (PDF) Special equipment included:- 2x AK BEND SIDE supports (lateral sheet metal support system)- Bending rolls with profile roll extension Include ...

sheet width: 3050 mmplate thickness: 3.0 mm STpre-bending capacity: 3.0 mm STupper roll diameter: 170 mmlower roll diameter: 170 mmside roll diameter: 180 mmControl: konv. 0: 380 Vtotal power requirement: 3.0 KWweight: 4250 kg In good condition With new rubber-coated top roll () Also suitable for bending non-ferrous metalsEquipment:- Electro-hydraulic 3-roll bending machine- Asymmetrical roll arrangement- Electro-motor-driven side roll adjustment Including digital position display- Manual bottom roll adjustment Via hand crank- Including conical bending device Inclined bottom roll and side rolls Parallel alignment in any side roll position- Hardened rolls SAE 1050 CK 45- Manual folding storage for removing closed pipes Top roll must be raised before opening the storage (e.g., forklift/crane)- Safety device- Connection cable + connector- 4-way foot switch 2 buttons for side roll movement ( ...

sheet width: 1070 mmplate thickness: 4.0 mmpre-bending: 3.0 mmroll length: 1070 mmroll diam. toproll: 110 mmbending speed: 3.0 m/minengine output: 2.2 kWweight: 848 kgrange L-W-H: 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW ()Equipment:- robust electro-mechanical round bending machine- 2x central rollers driven by electric motor (top & bottom roller)- right/left running of the rollers- top roller can be manually swiveled out, with folding bearing- manual delivery of the side roller- including conical bending device- asymmetrical roller arrangement- rollers with profile inlets- safety device (safety line with switch unit)- 1x freely movable control panel- operating instructions (ENG)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

plate thickness: 6.0 mm STthickness at Niro-steel: 4.0 mmplate thickness: 8.0 mm ALUangle adjustable from - to: 30 - 140 Gradtable:: 950 x 890 mmblade length: 220 x 220 mmstroke: 35 H/minwork height max.: 1150 mmtotal power requirement: 3.0 kWweight: 800 kgrange L-W-H: 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=QmUbaV41BfAEquipment:- electro-hydraulic notching machine with adjustable angle 30° – 140°- cutting capacity up to 6.0 mm sheet thickness (R42/mm2)- made of the special spheroidal cast iron GS500.- the cutting movement takes place from top to bottom- robust work table made of steel with conical grooves which ensure optimal adhesion of the stop angles- the scales are embossed- automatic cutting gap adjustment (patented)- system for the automatic adjustment of the gap betwee ...

plate thickness: 4.0 mm STplate thickness: 3.0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4.0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397092The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.