rettificatrici usati in vendita

volt: 380 V: . Qualità: Schwere, Stabile

width of the strips: 75.0 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 67.0 kgrange L-W-H: 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt  ...

diametro massimo della mola: 150 mmlarghezza della mola: 25 mmdiametro del cono: 32 mmfrequenza di carico collegata: 230 Vpotenza del motore: 0,5 KWpeso: 16 kgdimensioni: 0,5 x 0,26 x 0,22 m

: 1000 x 600 mm Dimensioni piastra magnetica: 1000 x 600 mmAltezza di rettifica: max 400 mmLarghezza x diametro mola: 400 x 60 x 127 mmDimensioni: 3900 x 20 50 x 2400 m: JA Peso della macchina ca.: 6 t

width of the strips: 200 mmband length: 1490 mmband speed: 8.0 m/secmotor: 400 Voltloading area: 500 x 280 mmtotal power requirement: 1.5 kWDimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2000 mmband speed: 34,0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 4.0 kWweight of the machine ca.: 115 kgFurnishing :- integrated suction- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful motor 4.0 kW- suction nozzle including: integrated suction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mmband length: 2000 mmband speed: 343.0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 3.0 kWweight of the machine ca.: 100 kgrange L-W-H: 500 x 1010 x 1000 mmDescription:The belt sander models TAS 75 and 150 are powerfulQuality machines, built according to the strictest environmental andSafety regulations. The belt sanders are standardwith motor brake, adjustable working height, eye protection,Angle stop and motor protection switch with zero voltage releasebuilt. The low-noise machine with CE mark is suitableideal for grinding all metals.Furnishing:- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful engine 3.6 kW- suction nozzle including: integrated suction The data for this ad was created with ModulM ...

width of the strips: 150 mmband length: 2280 mmrevolutions per minute: 2880 U/minroll diameter: 140 / 80 mmtable-size: 700 x 350 mmengine output: 3.0 kWweight: 250 kgrange L-W-H: 1300 x 800 x 1500 mm- Machinevideo -https://www.youtube.com/watch?v=l-XFPai2BAAFurnishing :- Horizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized belt oscillation approx. 10 mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment included:- swiveling grinding unit 90 - 135 degrees- Support table on the pulleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 50.0 mmband length: 940 mmband speed: 3.0 - 22 m/minturning speeds: 1450 U/mintube diameter: 16 - 114 mmradius: 180 °total power requirement: 4.75 kWweight of the machine ca.: 265 kgrange L-W-H: 1000 x 750 x 1300 mmFurnishing:- stationary pipe belt grinders- Automatic material feed with separate drive motor- Replacement sanding belts- Stepless speed adjustment- Manual adjustment of tube tension- Polish bent pipes up to 180 (angle).- Manual work possible without feed- CE mark / declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding range: 8 - 32 mmsharp cornered angle min./max.: 90 - 140 Gradconnected load: 230 Vweight of the machine ca.: 16 Kgdimensions of the machine ca.: 0,43 x 0,24 x 0,24 mDrill grinding machine:Additional station for grinding back the drilling cutting surface (clearance angle)25tk. Collets ER 40 are included in the scope of delivery, these are also suitablefor clamping intermediate sizes. For grinding twist drills made of HSS andHard metals with a TiN layer of 8 - 32 mm.Rotor with precision ball bearings guarantees smooth running.Vibration-free running thanks to its heavy weight and rubber feet.Sharpening angle adjustable for all common twist drills.Package dimensions:430 x 240 x 240mm.Weight 16kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro della mola: 250 mmnumero di stazioni di lavoro: 2 Frequenza di carico collegato Stück: 230 Vvelocità di tornitura: 2850 U/minpotenza totale richiesta: 1,5 kWpeso della macchina ca.: 25 Kgdimensioni: 0,65 x 0,32 x 0,35 m

larghezza delle strisce: 100 mmlunghezza della banda: 915 mmdimensioni della mola: 200 x 32 mmdiametro del foro della mola: 30 mmpotenza totale richiesta: 0,9 kWpeso della macchina ca.: 35 Kgdimensioni della macchina ca.: 620 x 540 x 300 mm

diametro della mola: 250 mmfrequenza di carico collegata: 230 V: 90 - 180 U/minpeso della macchina ca.: 18 Kgdimensioni: 470 x 300 x 440 mDispositivo di affilatura dei coltelli con velocitàvariabile Mola 250 x 50 x 12 mm, grana 220Disco in pelle 200 x 30 x 12 mm

Control: Siemens 840 Dweight of the machine ca.: 13,5 tdimensions of the machine ca.: 7m x 4m x 2,75m mAccessories:Coolant tankGrinding wheelsVarious spare partsOperating and maintenance instructionsCE conformityDimensions: 7x4x2.75 m ( LxWxH)TECHNICAL DATA:Workpiece data:max. outer diameter: 250 mmwith max. grinding wheels Ø 450 mmmax. diameter to be machined over table: 375 mmProfile depth for dressable grinding wheels: 40 mmmax. workpiece length: 3,600 mmmax. distance between centers (1): 2,800 mmmax. bevel angle: +/- 90°Number of teeth of the workpiece: 1 - 999max. weight of the workpiece: 250 kgWorking area:Center distance between workpiece and tool spindle: 355-170 mmRadial travel: 185 mmAxial travel: 3,000 mmSwivel angle: +/- 90°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 650 mmworkpiece height: 160 mmControl: Fanuc 210i workpiece weight max.: 100 kg: x-axis: total Zustellung: 260 mmtraversing speed: 6 m/min: z-axis: stroke length max.: 750 mmtraversing speed: 12 m/mintable swivel clockwise/anticlockwise: 16/18 °weight of the machine ca.: 4,9 tWith B-axis!Equipment/accessories:-Mist extraction system-coolant system-Manual control panel-Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.