torni usati in vendita (3,047)

turning diameter over bed: 500 mmturning diameter over slide rest: 310 mmturning length: 3000 mmturning diameter in the gap: 750 mmcentre height: 250 mmturning speeds: 20-1000 U/minno. of turning speeds: 18 spindle bore: 56 mmlongitudinal feed: 0,045-1,09 mm/Uface feed: 0,025-0,625 mm/Unumber of feeds: 55 total power requirement: 4 kWweight of the machine ca.: 2,37 tdimensions of the machine ca.: 4,9 x 1,1 x 1,3 mMachine still in the delivery factory: Electric 380 Volt: chuck: Forkard 315 mmTool holder system Multifix: Typ C Taper turning device: Chip protect bonnet: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 500 mmturning length: 800 mmcontrol: Siemens 840D greates pass round over bed: 700 mmMain spindle:: turning speed range - main spindle: 20 - 5.000 min/-1power capacity - main spindel: 25 / 34 kWmax. Torque: 380 NmC-Axis: 0,01 °max. chucking diameter: 320 mmmilling spindle: milling spindle motor: 22,5 milling head speed: 12000 U/minb-axis: +/- 110 °tail stock: axis stroke:: x-axis: 480 mmy-axis: +/- 100 mmz-axis: 845 mmfeeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/minfeed power: 5,6 / 5,6 / 7,4 kNswitching time: 30°: 0,4 secturret:: number of toolpositions: 24 pos.tool taper: HSK A 63 total power requirement: - kWweight of the machine ca.: 10 tNC - turning and milling center- CNC control Siemens 840D Ergo Pro- Milling head with B-axis- Y axis- Coolant system (through Spindle) 15bar with paper band filter- chip conveyor- Tailstock- Suction- 24-fold tool  ...

max. bar material dia.: 42 mmmax. turning diameter: 180 mmturning length: 350 mmcontrol: Fanuc Main-/Counter -spindle turning speeds: 6.000 U/minnumber of tapers in turret head: 2 x 12 CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-6 with main and sub-spindle, 2x turrets aligned for driven tools and equipped with a bar feeder.The machine has 7.856h running hours.The machine is in good condition and can be inspected under power.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: 42STM-6 | 42STM | 42STM6 | 42 S TM-6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornitura: 950 / 650 mmlunghezza di tornitura: 2000 / 2500 mmcontrollo: HEIDENHAIN Manual Plus diametro mandrino a 3 griffe: 800 mmgamma di velocità di tornitura: 40 - 1000 U/minpotenza totale richiesta: 35 kWpeso della macchina ca.: 12 tdimensioni della macchina ca.: 8 x 3 x 3,5 m12 x stazione TorrettaContropunta2 x trasportatori di trucioliPrezzo EXW 17036 NeubrandenburgI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 320 / 270 mmworkpiece length - max.: 620 mmcontrol: Mazatrol Smooth swing diameter: 300 / 172 mmworkpiece weight: kg------------ MAIN SPINDLE ------------: turning speeds: 5000 U/minpassage of spindle: 76 mmc-axis: 0,0001 spindle motor: 15 / 11 kWspindle nose: A2-6 travel -x axis: 175 / 111 mmtravel -y axis: 100 / 70 mmtravel -z axis: 520 / 580 mmrapid travel x/y/z: 30 / 26 / 40 m/min2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle nose: A2-5 spindle passage: 61 mmw-axis: 625 mmbar capacity: 65 mmtotal power requirement: 39,2 kVAweight of the machine ca.: 9,1 tdimensions of the machine ca.: 2,87 x 2,3 x 2,4 mHighly efficient CNC turning centre with 2 turrets / 2 spindles for driven tools and long Y-axis travel- Smooth CNC control- Main & counter spindle- 2 tool turrets-- 12-station tool turret (2x)-- Spindle for rotary tool: spi ...

turning diameter: 300 mmturning length: - mmcontrol: - total power requirement: kWweight of the machine ca.: 9,1 tdimensions of the machine ca.: 2862 x 2290 x 2413 mmMAZAK HQR-MSY CNC Lathe with Twin TurretSub Spindle & Y Axis. Smooth Control. Year 2023Only 360 Cutting Hours from New Max swing (upper/lower turret) 320/270mm. Max machining diameter (upper/lower turret) 300/172mm. Distance between chuck jaw faces 620mm. Bar work capacity 65mm. Travels (upper turret) X/Y/Z 175/100/520mm.Travels (lower turret) X/Y/Z 111/70/580mm. Main spindle: Spindle speed 5000rpm. Spindle nose A2-6. Spindle bore 76mm. Rapid traverse (C axis) 555rpm. Second spindle: Spindle speed 6000rpm. Spindle nose A2-5. Spindle bore 61mm. Second headstock stroke (W axis) 625mm. Second headstock positioning speed (W axis) 30,000mm/min. Rapid traverse (C axis) 555rpm. Turret type 12 position drum turret (VDI). Number of  ...

: max. 800 mmturning length: max. 800 mmchuck: ohne documentation: inkl. Control: weight of the machine ca.: 8 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 584 mmgreates pass round over bed: 750 mmcontrol: Siemens 828 D Shop Turnspindle passage: 81 mmspindle speed:: 3500 U/minspindle motor: 18,5/22 kWmax. torque on the spindle: 410 Nmno. of tools in turret 1: 12 BMT 65driven stations: 12 BMT 65speed of driven tools: 5000 U/mindrive milling spindle: MK 5 kWy-axis: +/- 60 mmrapid traverse: 30/30/10 m/mintail stock: MK 5 range L-W-H: 4,6 x 1,9 x 2,1 mmweight of the machine ca.: 6,65 tCNC lathe with driven tools, Y- axis and sub spindle- 3 jaw chuck Kitagawa Ø 250 mm- Chip conveyor- partscatcher with box into door- signal lamp- 2 +2 driven toolholder- some fixed toolholder- boxway system- tool measuring- programmable tailstock- coolant 23 bar- bigger coolant tank 225 ltr.- double cartridge filter- coolant gun- two steps coolant pressureThe data for this ad was created with ModulMWS - the software solutio ...

max. bar material dia.: 65 mmcontrol: System TX 8H max. bar length: 3.000 mmCNC lathe | TRAUB - TNC 65 equipped with bar loader .The machine is in a well-maintained condition and can be inspected at any time under power.The machine videos from the production plant will be shared on request.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: TNC65 | TNC-65The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. bar material dia.: 65 mmmax. swing diameter: 175 mmmax. bar length: 3.000 mmcontrol: System TX 8F travel -x axis: 140 mmtravel -z axis: 520 mmCNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader.The machine is in a well-maintained condition and can be inspected at any time under power.The machine videos from the production plant will be shared on request.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DGThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 80 mmmax. turning diameter: 460 mmMax. Turning length: 1.000 mmcontrol: System TX 8F max. Spindle speed: 2.800 U/min.CNC lathe | TRAUB - TNA 500The machine is in a well-maintained condition and can be inspected at any time under power.The machine videos from the production plant will be shared on request.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA500 | TNA-500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 80 mmmax. turning diameter: 395 mmMax. Turning length: 750 mmcontrol: System TX 8H max. Spindle speed: 3.150 U/min.CNC lathe | TRAUB - TNA 400The machine is in a well-maintained condition and can be inspected at any time under power.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA400 | TNA-400The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 820 mmturning length: 2.000 mmcontrol: SIN 810 D center height over square guideway: 400 mmturning diameter over slide rest: 500 mmx-travel: 540 mmz-travel: 2.100 mmfeed x/z-axis: 0,01 - 50 mm/minrapid traverse X-axis: 5,00 m/minrapid traverse Z-axis: 10,00 m/minfeeding force facing: 12.500 Npower feed longitudinal: 20.000 Nspindle turning speed range: 6,4 - 1.600 U/minspindle turning speed - gearbox stage 1: 6,40 - 376 1/min.spindle turning speed - gearbox stage 2: 27,40 - 1.600 1/min.power capacity at 60% / 100 % load: 46,00 / 37,00 KWmax. torque at 60% / 100% load: 5.073 / 4.069 Nmconstant cutting rate: 1 - 9.999 m/min.spindle head DIN 55027 - Size: 11 spindle diameter in front bearing: 170 mmspindle bore: 128 mmtailstock quill taper MT: 6 diameter of quill: 125 mmquill stroke: 280 mmthread pitch: 0,1 - 400 mmtotal power requirement: 35,00 kWweight of the machine ca. ...

turning length: 1500 mmturning diameter: 475 mmturning dia. over face-slide: 290 mmturning dia. in gap: 655 mmturning speed range: 14.0 - 2000 U/minfeeds - longitudinal: 0.05 - 0.736 mm/minspindle passage: 61.0 mmtail stock: MK 4 quill stroke: 200 mmdiameter of quill: Ø 70.0 mmspindle head: DIN 55022 GR 6voltage: 380 Vtotal power requirement: 7.5 kWweight: 2400 kgrange L-W-H: 3080 x 1160 x 1485 mm From a maintenance workshop (university hospital) in good condition () With original documentation + machine cardFeatures:- Robust electric motor-driven conventional lathe- KLOPFER 4-jaw chuck Ø 200- MULTIFIX steel holder with 3x inserts- Movable steel holder guard - Adjustable bed stop- Movable tailstock incl. center point- Swiveling machine light- Machine swing feet - Chip guard (movable from behind)- EMERGENCY stop button at the front - Original operating instructions + machine card The da ...

turning length: 1.300 mmspindle diameter: 120 mmspindle bore: 38 mmcontrol: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock.The machine is in well-maintained condition.For further technical details, please refer to the attached offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-10 | N 10 | N10/2 | N10-2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mmturning length: 1245 mmcontrol: Siemens 828D greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 2800 U/minspindle drive motor: 22/18,5 kWspindle nose: ASA A2-11 spindle bearing diameter: 160 mmspindle bore: 115 mmbar material dia.: 102 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 24 St.travel -x axis: 260 mmtravel -z axis: 1350 mmtravel -y axis: 105 (+/- 52,5) mm2nd Spindle:: spindle turning speed range: 4500 U/minspindle motor: 7,5/5,5 kWspindle passage: 62 mmspindle nose: ASA A2-5 total power requirement: 59,5 kVAweight of the machine ca.: 7,9 tdimensions of the machine ca.: 4,4 x 2,1 x 2,2 mEquipped with:- Siemens 828D control system- Chip conveyor- Counter spindle- Workpiece holding arm- High-pressure coolant pump- 12-position turret, 7.5 kW, 5000 rpm- Arm for measu ...

: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0400 mm: 246 mm: 1250 mm: 195 mm: 54 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 670 mmswing diameter over bed slide: 490 mmmax. turning diameter: 490 mmcontrol: SIEMENS - 840 D main spindle bore: 115 mmexternal spindle dia. in forward position: 160 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,- 3 jaw chuck,A machine video from the production plant will be shared on request.The machine is in a well-maintained condition and can be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 960 mmswing diameter over bed slide: o: 860 / u: 730 mmturning diameter over bed slide: o: 860 / u: 400 control: SIEMENS - 840 D forward bearing diameter: 200 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000equipped with a turret for driven tools as well as tailstock.The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 3.000 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 3.700 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000equipped with a well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MC3000 | N40MCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.