torni usati in vendita (3,090)

Ref. -No.: 10714Manufacturer: MAZAKYear of construction: 1999Type of control: CNCControl: MAZATROL T PLUSStorage location: HalberstadtCountry of origin: JapanFurther information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement

Turn-mill centre manufactured in 1990. This MORI SEIKI SL 15 features a maximum swing over bed of approximately 450 mm and a standard turning diameter of around 160 mm. It offers a maximum turning length of approximately 525 mm and a spindle speed range of 50 to 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL 15 machine we have for sale. Contact us for further details.

Article: Vertical turning and grinding centreManufacturer: EMAGType: VSC 250 DSYob: 2008Control: SIEMENS 840DGrinding spindle speed: 30,000 rpmRotation spindle speed: 3,000 rpmTool places turret: 12Cooler for spindle and machine bed coolingCooling lubricant - lifting station (no independent cooling lubricant supply)Chip conveyorParts handling Air through the spindleTwo clamping circuits through the spindle (air and oil)Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:51 mmArticle: multi spindle automatic latheManufacturer: SchütteType: AF51Yob: 1987eight main spindlesmax. bar diameter D=51mmcontrol SIEMENS SIMATIC S5pick up in pos. 7, for rear machiningthread cutting driveindependent feed in positions 2/3electronical trip dog control ?Balluff?clear text display Wöhrlecoolant pumpmagnetic cartridge filteroil runningincl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type)Painting in light blue and light greyThe configuration of tooling will be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2016full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,3 x Y-axis,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot, manufacturer HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2019full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot make HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mmSchutte SF51 DNT, yob. 1987, our ID #61868Article: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: SF51 DNTYob: 1987Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter D=51mmelectronic cam control Balluffgripper in position 6 for backworking, sorting chuteindependent longitudinal feed layer 5screw chip conveyorTapping couplingsInterface for: Bar feeder IEMCA PRABar feeder IEMCA PRA40/33/FScope of delivery without the blue chip conveyorThe tooling will differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: Programme-controlled automatic latheManufacturer: TraubType: TF60 / 140Yob: 1978Bar automatPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: AF32 DntYob: 1993eight-spindle automatic latheeight main spindlesfor bars up to D=32mmModernized control: Siemens SinumerikMotors: renewed modern motors suitable for modernized control systemElectronic trip dog control: BalluffCNC cross slide position 5 crossCNC cross slide position 6 crossPreparation for gripper in position 8 (gripper optional)Independent feedsThread cutting couplingsintegrated bar loader: Pietro CUCCHI; type: rack type magazineThe scope of delivery regarding the tooling equipment could be different like pictures.

turning diameter:38 mmArticle: CNC Long-turn automatic latheManufacturer: HanwhaType: STL38HYear of construction: 2013Control: Siemens 840SL for 8 axesMain spindle:max. turning diameter: 38mm; spindle bore max. 42mm, n max. 6,500 rpmPower max. 23 kW; C-axis with 0.001 degree; stroke Z1 320mm; synchronised guide bush unit; guide bush type JBS or SL38; type collet 173E / F48Counter spindle:max. pick-up diameter: 38mm, n max. 6,500 rpmPower max. 23 kW; C-axis with 0.001 degree; stroke Z2 320mm; type collet 171E / F42Tool turret:n max. 6,000 rpmPower max. 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120Bar feeder FMB Turbo 5-55High-pressure station SFB-301 eco 150barPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

spindle passage:25 mmArticle: CNC sliding headstock automatic latheManufacturer: TornosType: Deco 2000/20Year of construction: 2001Control: Fanucspindle diameter: D25 mmmax. speed: 7000 rpmcomb: 2 (X,Z,Y-axis)Front attachment: 1 (X,Z,S-axis)Loading magazine: Tornos Robobar SSFChip conveyor: Hinged belt conveyorother: various accessories such as polygonal impact device, HF spindlePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:9 spindle passage:46 mmArticle: CNC-controlled multi-spindle automatic latheManufacturer: SchütteType: SC9-46Yob: 2016Six-spindle automatic lathe with 6 main spindles with max. nominal throughput D=46mm and 3 counter spindlesMain spindles: 6 motor spindles D46mm, 5. 000 rpm, 35 Nm to 80 NmCross slide units, transverse: 6 units, in positions I to VI,Slide units, longitudinal: 5 units, in positions I to V, Slide units, longitudinal: 5 units, in positions I to V,Counter spindles: 3 units, one each in positions VI, VIII and IX, 7. 500 rpmCross slide units, transverse: 2 units, in positions VIII and IX,Control:Siemens SINUMERIK 840SL with double NCUSoftware: Schütte SICS, Sinomerik Operate 4.5, Safety Integreted,Spindle coupling package ?CP-Expert?, for up to 8 spindle couplings (maximum expansion)Synchronous action package ?Level? 2, incl. cross-mode actions/ASUP (maximu ...

turning diameter:26 mmArticle: High-precision CNC lathe with linear cross slideManufacturer: BenzingerType: GOFuture B1Yob: 2016Machine was only used for reworking, i.e. only light machining work was carried out!Control: Siemens Sinumerik 840DslMain spindle: maintenance-free motor spindleBar capacity: D26mmLoading and unloading device type IBAdditional gripper system for placing the workpieces in the correct position on the unloading beltCoaxial valve for coolant to the linear tools (3 pieces)Internal clamping deviceC-axis main spindle for digital control incl. transmit functionAdjusting microscope 16x magnificationCoolant supply through the spindle clamping cylinder,Sealing air,Speed increase of the motor spindle to 8. 0000 rpmNordmann tool monitoringProfibus master interfaceHinged belt conveyor KnollCompact coolant device KnollMBE interfaceSmall fire extinguishing system Kraft & BauerN ...

number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: SFH130Yob: 1995six-spindle automatic lathe6 main spindles as a chucker automatic lathecontrol Siemens S7-200 PLCDnt driveloading and disloading in position 6additional cooling pump with magnetic spark plug filterPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: SG18Yob: 1999six-spindle automatic lathe6 main spindles as a chucker automatic lathecontrol Siemens S7-200 PLCloading and disloading in position 6spindle brakePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:20 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: SF20 S DntYob: 1999Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter: D=20mmSpindle drum hirth coupled,CNC cross slide in positions 4,CNC cross slide in positions 5,pick up in position 6, sorting chute, 1x independent feed,thread cutting couplings,workpiece belt,Coolant tank with hinged belt chip conveyor Ruez,Oil/steel operation,PLC Siemens S7, Siemens CNC control, Siemens Simodrive 611,The scope of delivery regarding the tooling equipment could be different like pictures.Interface for: IEMCA PRA bar loading magazine (optional: IEMCA PRA40/31/ built in 1997 rear loader)

number of spindles:6 spindle passage:36 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchutteType: SF32 S DntYob: 2003Eight-spindle automatic lathe with 6 main spindlesmax. nominal diameter: D=36mm!Spindle drum with hirth coupling,Elbaron oil mist filter,sorting chute,Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F);coolant tank with hinged chip conveyor;Schimpke KSS active cooler,control: Siemens S7-300 PLC;tooling included in delivery may differ from the images;various collets are included in delivery up to D36mmPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchutteType: SF32 S DntYob: 2001Eight-spindle automatic lathe with 6 main spindlesmax. nominal diameter: D=32mmSpindle drum with hirth coupling,Elbaron oil mist filter,sorting chute,Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F);coolant tank with hinged chip conveyor;Schimpke KSS active cooler,control: Siemens S7-300 PLC;tooling included in delivery may differ from the imagesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

spindle passage:36 mmArticle: CNC-controlled multi-spindle automatic latheManufacturer: SchütteType: A36PCYob: 2005Loading magazine by Pietro CucchiKnoll unit7 radial cross-type carriages2 additional speed motors in 4th and 5th positions2 additional speed motors for front spindles in position D (pick-up) and B (for front motorized spindle)1 polygon cutter1 motorized front spindle1 radial motorized in position IV for cross-type carriage1 radial motorized in position V to be mounted on X-type carriage only (no cross-type carriage)1 straight head for motorized position IV1 90-degree tilted head for motorized position IV1 tilt-adjustable head for motorized position IVPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 Article: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: AFH130 with CNCYob: 1990eight-spindle automatic lathe8 main spindlesChucker AFH130 for complete machining means front- and back sideControl Siemens Sinumerik 840DIcomplete revising and new configuration of this machine in year 2010.loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length controlCNC compound slide in pos. 5coolant pump with magnet candle filterdelivered tooling: could be different like picturesoption:Ergomat TBF42 for cutting off for half finnishing with FMB-TurboVisiting under production condition is possiblePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

turning diameter:336 mmturning length:216 mmweight of the machine ca.:8,3 tArticle: CNC multi-axis latheManufacturer: HurcoModel: TMX 8MYSiYear of manufacture: 2022CNC multi-axis latheExcerpt from manufacturer?s specifications:Working area:Max. turning diameter: 336 mmMax. swing diameter: 560 mmMain spindle specifications:Max. speed: 4,500 rpmChuck diameter: 210 mmTie-bar diameter: 64.5 mmCounter-spindle specifications:Max. speed: 6,000 rpmTool turret with driven toolsBar-Loading Magazine: SAMSYS M3000 (2022 model)HYDAC CoolerThe machine can be visited under power.The tool configuration included in the scope of delivery may differ from the imagesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Key data: 250 mm, 400 mm, 5000 1/min

Dati tecnici: Produttore: Filatore Tipo: TC300-52 SMMCY Anno di realizzazione: 2014 Controllo: Fanuc Series 32i Modello A Corsa: X1 180 mm X2 110 mm Z 450 mm Y +40/-40 mm Lunghezza di rotazione: 400 mm Diametro di rotazione: 250/200 mm Diametro oscillazione: 400 mm Orari di servizio: 56.463 Fuso di Funzionamento 1 Velocità: 5.000 giri/min Coppia: 96/121 Nm Potenza: 15/19 kW Passaggio a barre: 52 mm Fuso di funzionamento 2 Velocità: 7.000 giri/min Coppia: 38 Nm Potenza: 6 kW Torretta utensile 1 e 2 Numero di stazioni: 12x Montatura: BMT 45 Velocità massima all'attacco (GPA): 6.000 giri/min Potenza: 8/2,6 kW Dimensioni e peso Dimensioni: 2.200 x 2.000 x 2.000 mm Peso: circa 4.600 kg Condizioni Condizione: Usato Funzionale: Testato e completamente funzionante Altre attrezzature e accessori includevano: Pompa ad alta pressione con filtro Br ...

Tornio CNC MAZAK QUICK TURN 200 MY Con controllo MAZATROL SmoothG Anno di produzione: 2020 Diametro di rotazione: 380 mm Lunghezza di lavorazione: 575 mm Diametro del mandrino: 65 mm Intervallo di velocità: 20 – 5000 giri/min Con i seguenti accessori: Protezione contro lo scivolo con illuminazione interna Torretta a 12 marce con 12 stazioni di trasmissione VDI 30 Vari portautensili VDI 30 Hydr. Mandrino a 3 mascelle KITAGAWA 0 210 mm Vari set di mascelle per mandillo Hydr. Collet chuck con vari collets Asse Y, asse C Contrappunto con penna Nizzolo trasportatore a trucioli Piede per la regolazione del mandrino della mascella Configurazione del liquido di raffreddamento Istruzioni operative

Specifiche tecniche Lavorazione simultanea a 5 assi Oscillazione massima sul letto: 760 mm Distanza tra i centri: 1.519 mm Escursione dell'asse X: 615 mm Movimento dell'asse Y: 250 mm Escursione dell'asse Z: 1.585 mm Escursione sull'asse B: -30 a +210 Escursione X2 (torretta inferiore): 230 mm Movimento sull'asse Z2 (torretta inferiore): 1.388 mm Fuso principale Naso fuso: A2-8 Diametro del fuso: 112 mm Velocità massima del mandrino: 3.300 giri/min Potenza del mandrino: 30/22 kW Secondo fuso Diametro del mandrino: 300 mm Velocità massima del mandrino: 4.000 giri/min Diametro del mandrino: 91 mm Potenza del mandrino: 26/22 kW Seconda corsa del fuso: 1.574 mm Fuso di fresatura Velocità massima del mandrino: 12.000 giri/min Coppia massima: 120 Nm Torretta di fresatura a perno singolo Cambio automatico di utensili Attrezzatur ...

A CNC lathe with counter spindle including accessories is offered for sale. Spindle bore: Ø 32mm. Machine hours: approx. 47000. Control system: Siemens Sinumerik 820T. Equipped with a 16-station Sauter tool turret VDI20, Röhm KFD-HS 140/3 main spindle three-jaw chuck, Marquart Quadro NC collet chucking system, counter spindle collet holder 173E and Tebaron TEB/AH1 mist extraction unit. Accessories: approx. 85 VDI20 tool holders with blanking plugs, 173E collets from Ø 3-42mm, three new sets of soft jaws and additional jaws, optical tool measuring device and VDI20 turret alignment bar. The cutting tools shown are not included. Control modules defective. Inspection possible by arrangement.

Turn-mill centre manufactured in 1986. This MORI SEIKI SL 3 features a maximum swing over bed of approximately 570 mm and a turning length of around 610 mm. It includes a spindle speed range of 30 to 3500 rpm and a turret with 8 to 12 stations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL 3 machine we have for sale. Contact us for further details.

Equipment: workpiece handling system, sub-spindle, live tooling on both turrets, two turrets, the upper turret is equipped with an additional milling spindle. Rated current: 119A, max. upstream fuse rating: 125A, control voltage: 24V DC, connected load: 70kW, control system: Siemens 800D, operating hours: 92,329h, a machine retrofit is required before the machine can be put back into operation. An on-site inspection is possible.

Torno Weiler DA 260 X1000 costruito nel 2016. Condizioni ottimali con display digitale e accessori. Tornio molto ordinato, immediatamente disponibile. Vendita precedente e errori esclusi.

Torno NEF 500, costruito nel 1998

This 5-axis Biglia B 620 YS was manufactured in 2019. It features a maximum turning diameter of 360 mm and a turning length of 620 mm. The machine is equipped with a powerful main spindle speed of 4,500 rpm and a sub-spindle speed of 5,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Biglia B 620 YS turn-mill centre we have for sale. Contact us for further details.