torni usati in vendita (3,126)

turning diameter: 400 mmswing diameter: 420 mmx-travel: 850 mmz-travel: 315 mmspindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mmturning speeds: max. 4000 U/mintool turret 12 times: C5 Captorapid traverse x + z axis: 45 / 30 m/minfeeding force: 11 kNtotal power requirement: 58 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 9,5 x 4,5 x 3 mHard turningDry machiningChip conveyorPromot Portal and CellmasterNo clamping device availableNo tools availableno Cellmaster accessories availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Larghezza centrale: 1000 mm, diametro di tornitura su banca/manovella/carrello: 360 mm/510 mm/205 mm, foro mandrino: 42 mm, velocità: 2100 giri/min, dimensioni della macchina X/Y/Z: circa 1950 mm/900 mm/1350 mm, peso: circa 750 kg. È possibile effettuare un'ispezione in loco.

turning diameter over bed: 350 mmturning diameter over slide rest: 310 mmturning length: 700 mmtotal power requirement: 4,6 kWweight of the machine ca.: 1,0 tDimensions (HxWxD): 2.200 x 1.300 x 1.175 mm--> Technical data Centre height: 175 mm--> Centre width: 800 mm--> Swing diameter over bed: 350 mm--> Swing diameter over support: 310 mm--> Gap length in front of the faceplate: 145 mm--> Cross slide travel: 205 mm--> Top slide travel: 100 mm--> Tool cross-section: 20x20 mm--> Bed Width: 220 mm--> Height: 300 mm--> Headstock Spindle bore: 46 mm--> Spindle nose: DIN 55027-5--> Spindle inner taper: 1:20--> Tool holder: MK-3--> Spindle speeds: 18--> Speed range: 25 - 2000 rpm--> Tailstock Quill diameter: 50 mm--> Quill inner taper: MK-3--> Quill travel: 140 mm--> Lateral adjustment: 10 mm--> Feed range Number of feeds: 256--> Longitudinal feeds (128): 0.042 - 0.929 mm Rev--> Cross feed ...

turning diameter over bed: 330 mmturning diameter over slide rest: 190 mmcentre distance: 650 mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chucktool holder devicetail stock Technische Daten / technical details:Spitzenweite / center to center 650 mmDreh-Ø über Bett / turning diameter over bed 330 mmDreh-Ø über Schlitten / turning diameter over sledge 190 mmSpindelbohrung / spindle hole 36 mmDrehzahlbereich / spindle speed 30-2500 UpM /rpmAntriebsleistung / drive capacity 2,2 kWGewicht der Maschine ca. / weight ca. 600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

È disponibile un tornio DMT. Interasse: 1000 mm, diametro dell'oscillazione sopra il letto/slitta frontale: 420 mm/210 mm, altezza del letto: 340 mm, foro del mandrino: 64 mm, diametro del mandrino: 115 mm, velocità: 4000 giri/min, diametro del cannotto: 60 mm, corsa del cannotto: 140 mm, larghezza della slitta frontale: 210 mm, lunghezza della slitta frontale: 640 mm. Dimensioni della macchina X/Y/Z: circa 2150 mm/1150 mm/1700 mm, peso: circa 1800 kg, controllo: Heidenhain, ore di funzionamento: circa 300 ore. Documentazione disponibile. È possibile effettuare un'ispezione in loco.

An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.

faceplate diameter: 2650 mmturning diameter over slide rest: 2800 mmturning diameter over plate: 3200 mmturning length: 10000 mmupper slide-adjustment: 250 mmspindle diameter in front bearing: 400 mmspindle turning speed range: 0,35 -1,12 / 1,2 - 56 U/minfeed: 0,05 - 18 mm/Uworkpiece weight: 9000 kgspindle motor: 60 kWmax. workpiece weight between centres: 20000 kgControl: total power requirement: - kWweight of the machine ca.: 93 tdimensions of the machine ca.: m- CNC control NUM 1060- 4-jaw face plate- Steel holder device- Tailstock- Base plate- Roller setting vice- Transverse travel of the top slide: 425 mm- Longitudinal displacement of the main slide in the centre section: 150 mm- Transverse displacement of the centre section on the lower section: 700mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Larghezza della punta: 430 mm Altezza della punta: 120 mm Foro del mandrino: 23 mm Velocità del mandrino: 60-3000 giri/min Testa mandrino conica corta DIN 4 Contropunta MK2 Avanzamenti da 0,03 a 2,5 mm Peso circa 360 kg Nuovo display digitale a 3 assi Aikron, freno del motore mandrino rinnovato, controllato tecnicamente. Accessori: Dispositivo pinza, mandrino per tornio Supporto in acciaio a cambio rapido 

: 0460 mm: 270 mm: 1500 mm: 230 mm: 76 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornitura: 720 mmlunghezza di tornitura: 3.000 mmcontrollo: FAGOR 8055 TC/B diametro di tornitura sul letto: 470 mmforo mandrino: 92 mmnaso mandrino: DIN-55027-11 diametro mandrino: 150 mmazionamento mandrino: 17 / 20,5 kW potenza totale richiesta: 28 kWpeso della macchina ca.: 5,7 tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Key data: 210 mm, 305 mm, 5000 1/min

Tornio CNC Marca: Gildemeister Modello: CTX 200 Controllo: Heidenhain Pilot 1190 Anno di costruzione 1996 Ore di accensione: circa 38.000 h Indicazioni Diametro circonferenziale sul letto 440 mm Diametro circonferenziale sopra il carrello 210 mm Lunghezza di tornitura 305 mm Passaggio barra 42 mm Velocità 5000 giri/min Torretta 12 stazioni Portautensili 20 VDI Dimensioni della macchina L x P x A 2800 x 1651 x 1771 mm Peso della macchina circa 3000 kg Accessoristica: Vari portautensili Mandrino a pinza sul mandrino principale Contropunta Documentazione

Controllo Fanuc 21T Diametro tornibile 158 mm Diametro circonferenziale sopra il letto 340 mm Velocità 6.000 min-1 Revolver a 8 velocità Contropunta mandrino a 3 griffe, mandrino a 2 griffe, mandrino a pinza Pinze Portautensili versatili

A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Sono disponibili tre torni orizzontali CNC Okuma. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. Il Okuma LB 15 W è difettoso. È possibile effettuare un'ispezione in loco. Possibilità di vendita individuale.

turning diameter over bed: 420 mmturning diameter over slide rest: 290 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 210 mmspindle bore: 38 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2,4 x 1,1 x 1,3 mLead and feed spindle lathe- 3-jaw chuck 220mm- Quick-change tool holder with 5 cassettes- Steady rest- Chip tray- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mmturning length: 2000 mmcontrol: total power requirement: 15 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmturning diameter in the gap: 530 mmturning speeds: 65 - 1810 U/mincentre height: 205 mmspindle bore: 52 mmtailstock quill taper MT: 4 total power requirement: 2,2 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,3 mCenter lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 264 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 44 - 2000 U/mincentre height: 200 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 1,5 / 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Con due moduli di lavorazione, asse X: da -50 a 725 mm, asse Y: da -200 a 300/ da -250 a 250 mm, traslazione rapida X-, Y-, asse Z: 18/12/30 m/min, lunghezze di tornitura: 1500/2000/2500/3200/4000/4500/6500 mm, diametro di rotazione: 780/ 880 mm, foro mandrino di tornitura: 92/123 mm, gamma di velocità del mandrino principale: 0-3000/0-3000/2000/min, max. Velocità dell'unità di tornitura/fresatura: 5000/6000/10000/min, lunghezza massima dell'utensile: 900/600/1000/300/900 mm, corsa del cannotto: 160/170 mm, carico collegato: 102 kVA, sistema di controllo: SINUMERIK ONE / SINUMERIK 840D sl, controllo del sistema di azionamento: SINAMICS S120, peso: 17 t. È possibile effettuare un'ispezione in loco.

È disponibile un tornio parallelo di precisione CNC Pinacho. Altezza centrale: 180 mm, larghezza centrale: 750 mm-1000 mm, diametro di tornitura sul letto di guida/slitta longitudinale/slitta trasversale: 360 mm/335 mm/198 mm, larghezza del letto: 250 mm, alesaggio: 42 mm, velocità: 4000 giri/min, avanzamento X/Z: 10 m/min, traslazione rapida X/Z: 10 m/min. Diametro gambo contropunta: 58 mm, lunghezza gambo contropunta: 200 mm, cono Morse: MK3, corsa minima della lunetta mobile/fissa: 10 mm, corsa massima della lunetta mobile/fissa: 70 mm/114 mm, controllo: Fanuc 0i. Documentazione disponibile. È possibile effettuare un'ispezione in loco

Diametro di tornitura su banca/slitta frontale: 360 mm/160 mm, interasse: 800 mm, corsa X/Z: 205 mm/810 mm, velocità: 3150 giri/min, foro mandrino: 60 mm, posizioni utensile: 8, traslazione rapida X/Z: 10 m/min. Dimensioni della macchina X/Y/Z: circa 3300 mm/1800 mm/1800 mm, peso: circa 3300 kg, controllo: Traub System TX-8. È possibile un'ispezione in loco.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmcenter height over bed: 125 mmcentre distance: 550 mmbed width: 135 mmspindle bore: 26 mmturning speed range - stepless: 50 - 2.000 U/minpower requirement: 750 W3-jaw-chuck diameter: 125 mmtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 70 mmvoltage: 230 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 1,25 x 0,60 x 0,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpice diameter max.: 90 mmforward bearing diameter: 140 mmTurning speeds mainspindle: 4.200 U/minPower: 35,5 KWControl: INDEX C 200-4 travel -x axis: 1.500 mmtravel -z axis: 340 mmtravel -y axis: 180 mmb-axis: 360 °CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis.Further information:- direct measuring system on X + ZThe machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-300 | V 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kW

Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range

: 0400 mm: 1250 mm: : 200 mm: 80 mm: 315 mm: 2700 U/min : D1-8 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altezza del centro: 102 mmInterasse: 450 mmForo del mandrino: 25 mmVelocità del mandrino: 220 - 2600 Peso della macchina ca.: tDimensioni della macchina ca.: mGli accessori non sono stati controllati per la completezzaGli armadi non sono inclusi nella fornitura

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.