lavorazione della lamiera usati in vendita (3,361)

sheet width: 2540 mmplate thickness: 4,5 mm STthickness at Niro-steel: 3,0 mm VAbending angle max.: 0 - 135 °daylight opening: 100 mmback stop - adjustable: 70 - 600 mmtotal power requirement: 5,5 kWweight of the machine ca.: 6275 kgdimensions of the machine ca.: 3900 x 1700 x 1900 mmDescription .- Full hardened structure- BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand- with manual backgauge, adjustable from behind- Electronic components are quality components from SCHNEIDER- electrical cabinet is integrated in the side stand- Adjustment of the hydraulic pressure to the material thickness- Adjustment of the material thickness on the bending beam is easy with a mm scale- Handle for adjusting the material thickness on the upper beam is hidden in the side stand- Segmented upper cheek The data for this ad was crea ...

sheet width: 1050 mmplate thickness: 1.50 mmdaylight opening: 100 mmbending angle max.: 135 °height: OW 100 mmtotal power requirement: manuell weight of the machine ca.: 330 kg.dimensions of the machine ca.: 1600 x 900 x 1450 mmEquipment:- robust, manual swivel bending machine- divided upper tool - lower and rear tool Height of upper tool = 100 mm Division 100/100/100/100/100/100/100/70/60/50/40/30/100 left + right with horn tool- upper tool with quick-change system- quick foot clamp- angle stop - lockable- manual rear stop 500 mm- machine can be moved (rollers)- accessories box - rear Pictures show identical machine (UFA 1212)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6,5 mm ST 40: 3,5 mm VA: 90° Gradblade length: 250 x 250 mmtable:: 810 x 750 mmwork height max.: 950 mmengine output: 4,0 weight: 630 kgrange L-W-H: 810 x 750 x 1150 mmCharacteristics :- Notching with a burr-free cut, without deformation of the cut edges- Blades made of surface-hardened tool steel- Operation by means of a foot pedal, so both hands are free for the workpiece- Large dimensioned work table with built-in scales- T-slots for precise guidance of the swiveling stops- Protective cover in front of the cutting blade for high securityscope of delivery- 1 set of cutting knives- 2 swiveling material stops- Plexiglas protective cover- Foot pedal with emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6.0 mm ST 40: 3.0 mm VA: 30 - 140 Gradblade length: 200 x 200 mmtable:: 900 x 990 mmwork height max.: 940 mmPunching capacity: 35.0 in 6.0 mm ST 40Throat / punching unit: 135 mmengine output: 4.0 kWweight: 1020 kgrange L-W-H: 900 x 990 x 1200 mmCharacteristics :- Notching with a burr-free cut, without deformation of the cut edges- Blades made of surface-hardened tool steel- Operation by means of a foot pedal, so both hands are free for the workpiece- Large dimensioned work table with built-in scales- T-slots for precise guidance of the swiveling stops- Protective cover in front of the cutting blade for high securityscope of delivery- hydraulic Notching machine with adjustable angle & punching station- 1 set of cutting knives- Round punch with die 12 mm- 2 swiveling material stops- Plexiglas protective cover- Foot pedal with emergency stopThe data for this ad was created with ModulMWS - ...

: 3.0 mm ST 40: 2.0 mm VA: 90.0 Gradblade length: 130 x 130 mmtable:: 640 x 460 mmwork height max.: 900 mmengine output: pneumatisch weight: 200 kgrange L-W-H: 600 x 670 x 1270 mmProperties:- Notching with burr-free cut, without deformation of the cutting edges- Machine body made of high-quality gray cast iron, base made of sheet steel- Cutting blades made of surface-hardened tool steel- Effortless work thanks to pneumatic drive- Operation using a foot pedal, so both hands are free for the workpiece- Large work table with integrated scales- T-slots for precise guidance of the pivoting stops- Protective cover in front of the cutting blade for high safetyScope of delivery- 1x set of cutting blades- 2x pivoting material stops- Plexiglas protective cover- Foot pedal- Base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mmthroat: 260 mmdistance between roll centers: 92.0 mmweight: 295 kgrange L-W-H: 1200 x 700 x 1200 mm Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- 3x pairs of beading and flanging rollers included in delivery- robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- for the economical production of a wide variety of bead types- high accuracy thanks to precision-mounted shafts- Clearly arranged switching elements- Base frame equipped with storage compartment- powerful drive motor, even under continuous load- mobile foot switch for clockwise and counterclockwise rotationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mmthroat: 260 mmdistance between roll centers: 132 mmstroke: 55.0 OW mmtool adaptor: Ø 35 mm, 12 mm Nut mmtotal power requirement: 3.0 kWweight of the machine ca.: 450 kg.range L-W-H: 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- 3x pairs of beading and flanging rollers included in delivery- robust beading machine with motor-driven rollers- hydraulic adjustment of the upper roller, with pressure gauge- Lower shaft with adjustable stop- for the economical production of a wide variety of bead types- high accuracy thanks to precision-mounted shafts- Clearly arranged switching elements- Base frame equipped with storage compartment- powerful drive motor, even under continuous load- mobile foot switch for clockwise and counterclockwise rotationThe data for this ad was created wit ...

plate thickness: 1.20 mm STShaft length: 140 mmroll diameter: 62.0 mmthroat: 100 mmroll speed: 16.0 + 32.0 U/minengine output: 0.75 kWweight: 135 kgrange L-W-H: 900 x 450 x 1350 mm Display machine - like new Never been used () Special price upon requestFeatures:- 8 pairs of beading and flanging rollers included- Robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- For economical production of a wide variety of bead types- High accuracy thanks to precision-mounted shafts- Clearly arranged control elements- Manual adjustment of the upper roller- 2 bending speeds- Powerful drive motor, even under continuous load- 1 mobile foot switch for forward and reverse rotation- Machine base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mm STshaft length: 250 mmroll diameter: 96.0 mmthroat: 160 mmroll speed: 6.0 + 13.0 U/min.total power requirement: 1.5 kWweight: 350 kgrange L-W-H: 1400 x 550 x 1120 mm Display machine - like new Never been used () Special price upon requestFeatures:- 4x pairs of beading and flanging rollers included- Robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- For economical production of a wide variety of bead types- High accuracy thanks to precision-mounted shafts- Clearly arranged control elements- Manual adjustment of the upper roller- 2x bending speeds- Powerful drive motor, even under continuous load- 1x mobile foot switch for forward and reverse rotation- Machine base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm STshaft length: 140 mmroll diameter: 62.0 mmthroat: 100 mmtotal power requirement: manuell kWweight of the machine ca.: 50.0 kgdimensions of the machine ca.: 560 x 220 x 500 mm Display machine - like new Never been used () Special price upon requestDescription:- 8 pairs of beading and flanging rollers included- For the economical production of a wide variety of bead types- High accuracy thanks to precision-mounted shafts- Lower shaft with adjustable stop- Sturdy cast iron construction with a modern design- Expanded application range thanks to 8 different, optionally available roller pairs- Adjustable upper shaftThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mmthroat: 270 (140) mmdistance between roll centers: 60.0 mmtotal power requirement: manuell kWweight of the machine ca.: 46.0 kgdimensions of the machine ca.: 600 x 250 x 500 mmFurnishing:- various replacement rollers- hand crank- front stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdown holder: 18 Stückno. of strokes: 15 Hub/minoil volume: 150 ltr.cutting angle: 1,2 °control: CYBELEC Cybtouchback stop - adjustable: 1000 mmwork height max.: 800 mmengine output: 11,0 kWweight: 8.100 kg.range L-W-H: 5000 x 2410 x 1650 mm-------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------Furnishing: - CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trave ...

pressure: 60.0 tchamfer lenght: 2100 mmdistance between columns: 1700 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmoil volume: 150 ltr.voltage: 400 Volttotal power requirement: 7.5 kWweight: 5640 kgrange L-W-H: 3250 x 1960 x 2750 mm-------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA 53T (touchscreen)- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 stop fingers- controlled axes Y1 - Y2 - X - R - C (crowning)- electr. Crowning controlled by CNC- Upper deer foot tool with PS 135.85-R08, system A with quic ...

sheet width: 2100 mmplate thickness: 6,0 mm ST 42thickness at Niro-steel: 4,0 mm VAcutting angle: 1,2 Gradno. of strokes: 28 Hub/minoil volume: 150 ltr.down holder: 11 Stückcontrol: CYBELEC CybTouchengine output: 11,0 kWback stop - adjustable: 1.000 mmtable height: 800 mmweight: 4.500 kgrange L-W-H: 3.010 x 2.100 x 1.640 mm-------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------Furnishing: - CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up a ...

plate thickness: 4.0 mm STplate thickness: 3.0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4.0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397092The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mm STplate thickness: 3.0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4.0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397088The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 4.0 mm: 3.0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3.0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mmFurnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- Waste bin- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife- once for each notch over 30° left and once on the right.- the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried ou ...

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 160 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 160 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 13800 kgrange L-W-H: 5150 x 2250 x 3000 mm-------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 s ...

sheet width - max.: 1255 mmplate thickness: 4.0 mm STplate thickness: 2.0 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: ~ 66 Hübe/min.cutting angle: 1.5 °total power requirement: 5.5 kWweight of the machine ca.: 2600 kg.range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition ()Furnishing:- electro-hydraulic guillotine shears- manual backgauge with analogue position display (scale + magnifying glass)- electrical cutting length limitation- manual cutting gap adjustment- 1x extra long side stop- 2x extra long support arms- 1x free moving footswitch- rear sheet metal slide- User manual (PDF) Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9325278The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3.0 mmthickness at Niro-steel: 1.5 mmno. of strokes: 35 Hub/mincutting angle: 2°30 °engine output: 3.0 kWtable height: 810 mmweight of the machine ca.: 1150 kg.range L-W-H: 1300 x 1520 x 1170 mm from a maintenance workshop ()Furnishing:- robust electro-motorized metal sheet shears- manual backgauge- adjustable up to 610 mm, using the handwheel from the back- 1x side stop including mm scale- 2x table sheet metal support arms- Piece counter- freely movable foot switch- rear sheet metal slide- EMERGENCY stop button at the front Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9325126The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secreturn speed: 135 mm/secwork speed: 10,0 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 90,0 mmoil volume: 200 ltr.voltage: 400 Volttotal power requirement: 15,0 kWweight: 11.950 kgrange L-W-H: 5100 x 2150 x 2850 mm--------------------------------------------------Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2  ...

sheet width: 3100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdistance between columns: 3100 mmdown holder: 14 Stückoil volume: 150 ltr.cutting angle: 1,2 °no. of strokes: 18 Hub/mincontrol: CYBELEC CybTouchtotal power requirement: 11,0 kWweight: 6300 kgrange L-W-H: 4.000 x 2.100 x 1.640 mm--------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------- Furnishing:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for lo ...

plate width: 2503 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: 15 - 20 Hübe/mincutting angle: 1.7 °work height max.: 900 mmControl: ELGO TYP 85 total power requirement: 8.5 kWweight of the machine ca.: 3400 kgrange L-W-H: 2913 x 2250 x 1760 mmFeatures:- Robust NC electro-hydraulic guillotine shear- NC electro-motorized backgauge with ELGO control unit- Manual cutting gap adjustment- Front support table including recessed grips- 1x sturdy side stop with scale and tilting cam- 2x sturdy front support arms- 1x freely movable foot switch- Front finger guard- Front emergency stop button- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmdown holder: 14 Stückno. of strokes: 11 - 20 Hub/minoil volume: 310 ltr.cutting angle: 0.05 - 2.0 °throat: 350 mmtable height: 900 mmtotal power requirement: 22.0 kWweight of the machine ca.: 13400 kgrange L-W-H: 5.110 x 2.570 x 2.400 mm Current new price approx. 80.000 Euro Special price upon request- in checked conditions - machinevideo -https://www.youtube.com/watch?v=K4ymYMIJ7_Y-------------------------- ---------------------------------Robust electro-hydraulic CNC sheet metal shear with slide guides Includes CYBELEC DNC 60 CUT control system Includes CNC electro-hydraulic cutting gap adjustment Includes CNC electro-hydraulic cutting angle adjustment----------------------------------------------------------Eq uipment:- CNC electro-hydraulic guillotine shear with slide guides- Includes CYBELEC CNC controller ...

sheet width: 3100 mmplate thickness: 10,0 mmthickness at Niro-steel: 6,0 mmdown holder: 14 Stückno. of strokes: 13 Hub/minoil volume: 260 ltr.cutting angle: 2,0 °throat: 350 mmengine output: 22,0 kWback stop - adjustable: 1.000 mmweight: 10.575 kg.range L-W-H: 4,05 x 2,5 x 2,17 m--------------------------------------------------heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment--------------------------------------------------Furnishing :- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for longer cuts- 1x sid ...

sheet width: 3100 mmplate thickness: 8,0 mm STpre-bending: 6,0 mm STdiameter of upper rolls: 230 mmside roll diameter: 210 mmdiameter of lower rolls: 190 mmtotal power requirement: 7,5 kWweight of the machine ca.: 6.020 kg.dimensions of the machine ca.: 5142 x 1390 x 1300 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution  ...

pressure: 100 tchamfer lenght: 2600 mmdistance between columns: 2200 mmcolumn arm: 410 mmram stroke speed: 200 mm/secwork speed: 9.5 mm/secreturn speed: 155 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmoil volume: 150 ltr.voltage: 400 Volttotal power requirement: 7.5 kWweight: 6850 kgrange L-W-H: 3750 x 1950 x 2800 mm-------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA 53T (touchscreen)- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 stop fingers- controlled axes Y1 - Y2 - X - R - C (crowning)- electr. Crowning controlled by CNC- Upper deer foot tool with PS 135.85-R08, system A with quick- ...

pressure: 220 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 185 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 930 mmtable width: 200 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 11286 kgDimensions (HxWxD): 4550 x 2250 x 2850 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, Sys ...

pressure: 175 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 12.0 mm/secreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmtable width: 90.0 mmvoltage: 400 Volttotal power requirement: 15.0 kWweight: 12100 kgrange L-W-H: 5.100x2.150x2.850 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A-  ...

sheet width: 1050 mmplate thickness: 2,0 mmdistance between columns: 1050 mmdown holder: 1 Stückfence: Tisch 80 - 480 mmfence: Breiten 0 - 600 mmtable-size: 1300 x 600 mmwork height max.: 760 mmtotal power requirement: manuell kWweight of the machine ca.: 413 kg.range L-W-H: 2,0 x 1,04 x 1,6 m- Including adjustable stop on the work table for miter cuts- The knife can be lifted easily thanks to the counterweight on the back- Large work table for safe placement of the sheet metal plates- Sheets can be pushed through, i.e. longer sheets can be cut- Handwheel on the front to adjust the back gauge- Comes with a robust cast iron base as standard- Long service life thanks to knives made of quality steel- Standard with hold-down device including quick-release clamp- Robust machine construction for high stabilityFurnishing:- manual lever shears- stable execution- hold-down bars- Side scale with  ...