fresalesatrici e centri di lavoro usati in vendita (3,276)

x-travel: 3000 mmy-travel: 2000 mmz-travel: 1600 mmspindle diameter: 150 mmspindle taper ISO: 50 spindle stroke: 700 mmspindle turning speed - stepless: 5 - 2500 U/minrapid traverse: 10000 mm/mintable surface area: 1600 x 2000 mmworkpiece weight: ca. 20 tspindle drive motor: 50 kWfeeds x/y/z -stepless: 1 - 9999 mm/mintable positioning: 360.000 °total power requirement: ca. 70 kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,0 x 8,0 x 4,5 mHorizontal drilling and milling machine / machining centre in cross-table designwith:2005 new 5-axis CNC control Dr. Heidenhain TNC 430 - electronic handwheel HR410 for all axes with V24 interface, punched tape reader, new electrics,new hydraulics, new servo motors, measuring probe for workpiece measurement- 60-position chain tool changer model WM III k02- B-axis (table rotary adjustment) 360,000 °- IKZ - internal spindle cooling, 20  ...

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2000 mmz-travel: 1250 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 spindle turning speed range: 3000 U/minfeed range: 4 - 3000 mm/mintable load: 12 tspindle taper ISO: 50 spindle motor: 37 kWrapid traverse: 10 m/minControl: Heidenhain iTNC 530 b-axis: 360 °total power requirement: ca 70 kWweight: 36 trange L-W-H: 8 x 8 x 3,5 mequipped with:- CNC control Heidenhein iTNC 530 & handwheel- clamping table 1800 x 2200mm, 12t-- full B-axis with 360,000 positions- coolant- IKZ 20bar & extern cooling- BLUM TC 60 Taster- without chip conveyorca 11500 Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mmx-travel: 14300 mmy-travel: 4100 mm: 1000 mm: 2500 mm: 900 mm: ISO 50 : 5,5 - 1000 U/min: 55 kW: 4000 x 3500 mm: 60 tcontrol: Fagor 8055 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- Fagor 8055 CNC control- CNC rotary table (hydrostatic) 4000 x 3500 mm, 60 t- Coolant system (external)- Telescopic covers for the guideways- Operator platform attached to the spindle box- Plate field 2x 6000 x 2000 mm eachThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.000 mmy-travel: 1.000 mmz-travel: 1.200 mmcontrol: TNC 430 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 5.000 min/-1transmission ratio: 2 power capacity - main spindel: 30 (100%) / 45 (40%) kWTorque: 1.050 / 1.580 Nmtool taper: HSK 100 swivellable: B: +/- 180 °indexing: B: 0,001 °work table:: table surface area: 1.000 x 2.000 mmmax. table load: 4.000 kgflute distance: 100 mmT-slots: 18 H7 number of T-slots: 10 tool magazin:: number of toolpositions: 40 pos.tool taper: HSK 100 tool changing time: 10 secmax. tool diameter: 250 mmmax. tool length: 400 mmmax. tool weight: 20 kgfeeds:: feed speeds: X,Y,Z: 0 - 20.000 mm/minfeed speeds: B: 10 1/minoutput: X,Z: 15,7 / Y: 8,5 kWoutput: B: 2,5 kWfeed power: 22500 Ntotal power requirement: kWweight of the machine ca.: 23 tdimensions of the machine ca.: 8,0 x 8,0 x 3,3 mChip conveyor: Coolantsystem: high pre ...

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: TNC 426M HeidenhainMain spindle:: turning speed range - main spindle: 20 - 9.000 min/-1power capacity - main spindel: 9 / 13 kWmax. Torque: 57 / 82 Nmtool taper: ISO 40 DIN 69871swiveling-rotary-table:: table diameter: 700 x 500 mmswivellable: B: 105° (-10°/+95°) man.rotatable: 360° man.max. table load: 200 kgnumber of T-slots: 7 T-slot - distance: 63 mmT-slot - width: 14H7 mmcenter hole: 30H7 mmTool-Presetter:: number of toolpositions: 16 pos.tool taper: ISO 40 DIN 69871max. tool length: 290 mmmax. tool weight: 6,0 kgmax. total weight: 50 kgfeeds:: feed speeds: max. 10.000 mm/minrapid traverse: 12 m/mininput unit: 0,01 mmtotal power requirement: 17 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 4,0 x 4,0 x 2,5 mDocuments: Chip-Tray: Coolantsystem: B-axis: man. C-axis: man. Swivel-Rotary-Table: Automat ...

x-travel: 550 mmy-travel: 305 mmz-travel: 460 mmControl: Sinumerik 808D adv. SiemensMain spindle:: turning speed range - main spindle: 10 - 10.000 min/-1power capacity - main spindel: 11 / 7,5 kWmax. Torque: 70 / 48 Nmtool taper: BT 40 work table:: table surface area: 800 x 320 mmmax. table load: 300 kgT-slots: 3x 14 x 100 mmdistance spindle /table: 100 - 600 mmTool-Presetter:: number of toolpositions: 12 pos.tool taper: BT 40 max. tool diameter: 70 mmmax. tool weight: 6,0 kgchange-time tool to tool: 7,0 secfeeds:: rapid traverse ( X / Y / Z ): 10 m/minfeed speeds: max. 10.000 mm/minrepeating accuracy: +/- 0,008 mmpositioning accuracy: +/- 0,01 mmtotal power requirement: 15 kVAweight of the machine ca.: 2,9 tdimensions of the machine ca.: 3,5 x 2,5 x 2,4 mDocuments: swarf management system: Coolantsystem: Automatic Tool Changer: test probe: RENISHAW - Primo CNC-MachiningCenter Ve ...

spindle diameter: 200 mmProcessing width on table: 6000 mmProcessing height on table: 3150 mmProcessing depth: 1985 mmSlide cross-section: 530 x 550 mmtable load: 20 tPlate field size: 16800 x 5500 mmtool taper: SK 60 total power requirement: kWweight of the machine ca.: 173 tdimensions of the machine ca.: m- Additional equipment Angle head large and small- The OB no. is: 22979- The table is the model S20 MP table Size: 2200 x 2500 mm- The processing width on the machine X -Way is 6000 mm- Including 6 plates 5600 mm x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 1350 mmy-axis: 1150 mmz-axis: 895 mmcontrol: HEIDENHAIN iTNC 530 turning speeds: 15000 U/mintool taper: HSK-A63 surface area: 1100 x 1000 mmmax. table load: 1600 kgnumbers of tools in magazin: 92 spindle drive: 30 / 38 kWA-Axis: -16 / +120 °total power requirement: 58 kWweight of the machine ca.: 12,6 tdimensions of the machine ca.: 5100 x 2300 x 3090 m2023 new Spindlemachine equipped with:- CNC Control Heidenhain TNC 530- swivel head, direct drive ‘High Torque’ motor- Autom. Tool change: 46-position tool magazine- High pressure cooling through spindle– Chip evacuator– Tool control with duallaser– Radio frequency probe– Airthrough spindle– APS(Advanced Process System) & ITC(Intelligent Thermal Control)- Renishaw probeMachine on: 6680h, active drives: 4876h, spindle: 2657hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1660 mmy-travel: 760 mmz-travel: 660 mmcontrol: Mazatrol M Plus table surface area: 2000 x 760 mmtable load: 1,0 trapid traverse: 24 m/minturning speed range: 7000 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 | |no. of tools in the magazine: 2 x 24 Stückweight of the machine ca.: 8,1 tdimensions: 4,2 x 3,2 x 2,8 mVertical Machining Center traveling coloumn- internal coolant- chipconveyor- ext, hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 530 mmz-travel: 510 mmControl: M 730 BM MAPPS IVMain spindle:: max. spindle speed: 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 transmission ratio: 1 spindle diameter in front bearing: 80 mmwork table:: table surface area: 900 x 600 mmmax. table load: 800 kgT-slots: 6x 18 x 100 mmdistance spindle /table: 150 - 660 mmTool-Presetter:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 150 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: ca. 1,3 secchange-time chip to chip: ca. 3,45 secfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 30.000 mm/minTipp feed: 0 - 5.000 : 20 mm/mintotal power requirement: 30 kVAweight of the machine ca.: 6,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mDocuments: Chip conveyor: work light: Automatic T ...

capacità del foro nell'acciaio (diametro): 28 mmgola: 200 mm corsa del foro: 105 mmsuperficie del tavolo: 360x340 mmdistanza mandrino/tavola max.: 540 mmgamma di velocità di tornitura - continua: 120-3000 U/minpotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

: 34 mm: 40 mm: 40 mm: MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,4/2,2 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection class IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads/min., (Tapping power dependent on spindle speed)Pos. 25.Coolant device B, consisting of: separate container (33 l), pump withMotor protection switch, complete fittingThe data for this ad was created with ModulM ...

x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmdistance spindle nose and table: 120 - 630 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 130 / 87 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/mintotal power requirement: 23 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mChip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probing: XYZ Operation mode  ...

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-travel: 1600 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 table load: 25 tfeed range: 10000 mm/minspindle turning speed range: 10 - 3000 U/minspindle taper ISO: 50 spindle motor: 37/46 kWrapid traverse: 10 m/minControl: Heidenhain TNC 640 total power requirement: 70 kWweight: 38 trange L-W-H: 8,5 x 8,6 x 5,5 mmEquipped with:- Heidenhein iTNC 640 CNC control & HR 510 handwheel- HUI 50 automatic milling head- 40-position tool changer (ISO 50)- B-axis in rotary table- Heidenhain optical scales- NC rotary table- Coolant system with paper belt filter, Coolant through Spindle 20bar- Chip conveyor- Heidenhain TS 460 measuring probe- Movable operating platform- Pfannenberg oil cooler- Central lubricationca 4450h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |internal coolant system feed: 40 barweight of the machine ca.: 10,5 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |weight of the machine ca.: 11 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacità del foro nell'acciaio (diametro): mmLunghezza del braccio: mmAltezza del pezzo max.: mmPotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Produttore: Elumatec Modello: SBZ 122/31 Anno di costruzione: 2007 Tipo di macchina : Centro di lavorazione barre Lunghezza di lavorazione: 3750 mm con supporto barra / 3500 mm senza Corsa dell'asse: X = 350 mm, Y = 280 mm, Z = 300 mm Velocità: 30 m/min velocità di posizionamento (tutti gli assi) Precisione: ±0,1 mm Mandrino: 6 kW, 21.000 giri/min, HSK F63 Stazioni utensili: 5 Diametro massimo dell'utensile: 200 mm (manuale), 92 mm (automatico) Diametro massimo della lama della sega: 500 mm Consumo d'aria: ~50 l per ciclo Fabbisogno di aria compressa: >7 bar Alimentazione: 400 V, trifase Scopri di più qui - / Contattaci all'indirizzo -

x-travel: 600 mmy-travel: 450 mmz-travel: 300 mmCNC-control: Roeders RMS6 table-size: 700 x 550 mmmax. table load: 800 kgspindle taper ISO: spindle turning speed range: 42.000 U/minfeed stepless: 0 - 30.000 mm/minrapid traverse: 30 m/mindrive capacity - spindle motor: 14 kWtool change unit: Pick-up 18 Pos.voltage: 400 Vtotal power requirement: 20 kVAweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,00 x 2,30 x 2,70 m- Serial No.: 88231-83- HSC spindle Fischer MFW1230/42- Dust extraction systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Produttore: LINEMATIC Modello: LM34/705 Anno di costruzione: 2004 Potenza: 14 kW Tensione: 400 V, 20 A, 50 Hz Fase: trifase + neutro + messa a terra di protezione Certificato CE Scopri di più qui - / Contattaci all'indirizzo -

Bohrleistung in Stahl (-Ø: 45 mmthroat: 1250 mmworkpiece height max.: 1100 mmswival range +/-: 360 °height adjustment: 745 mmbase plate surface area: 1450 x 920 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mmmax. torque on the spindle: 250 Nmfeed power: 14000 Nturning speed range: 20 - 1200 U/minfeed range: 0,063 - 0,63 mm/Udrilling capacity steel/cast iron: mmpower capacity: 3,7 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 m• cube table 650 x 650 x 500 mm,• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacità di alesaggio nell'acciaio (diametro): 40 mmgola: 380 mm corsa di alesaggio: 160 mm: 4 velocità: 60 - 1250 U/mindimensione-tabella: - mmpotenza totale richiesta: 3,3 kWpeso: 900 kgdimensioni: - mmCaratteristiche:-Trapano per ingranaggi con un design robusto-Tavolo di foratura montato su colonna-Rotazione destra/sinistra-Alimentazione-Sistema di raffreddamentoI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Diametro di foratura: 18 minCapacità di foratura Diametro max.: 15 mmProfondità del foro: 90 mmGola: 215 mmMandrino: Bis 360 mmMandrino: 560 mmPiastra del tavolo: 350 x 290 mmDiametro della colonna: 75 mmAltezza totale: max. 1050 mmPeso: circa 100 kgVelocità di rotazione del mandrino - continua: 100 - 1800 U/minVelocità del motore:: 700 / 1400 U/minMotore a cambio poliI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

gola: 180 mm corsa della penna: 80 mm capacità continua: 20 cono del mandrino: MK 2 dimensioni della tavola: 280 x 245 mm altezza della macchina: circa 1000 m diametro della colonna: 73 mm distanza mandrino / tavola: max. 425 mm dimensioni: circa 615 x 330 x 1015 mm peso: circa 60 kgincl. vice HM Müller HT100I dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

x-travel: 2000 (775 + 600) mmy-travel: 620 mmz-travel: 520 mmControl: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1power capacity - main spindel: 18 kWtable surface area: 1.200 x 600 mmrotary table diameter: Ø 500 mmswivellable: +15/-95 °rotatable: 0- 360 °max. table load: 1000/350 kgtool taper: SK 40 number of toolpositions: 30 pos.internal coolant system feed: 20 barrapid traverse ( X / Y / Z ): 30 m/mindimensions: 5,0x 2,5 x 3,3 mweight of the machine ca.: 11 tCNC-Machiningcenter Universal, 5-Axis and fixed tableMachine overhold for 60.000 €- NC-Swivel-Rotary-Table integrated right working area- Fixed-Table left working area- 4th axis on fixed table 165 centre hight- Chip conveyor- internal coolant- filter- 3D probe- Oil dust collector- 2022/2023 overhold for 60.000 € new slideways aspindles in all axis- electric roof- new spindle in 2016 at 20.800 Spin ...

2001 Hurco VMX40 Dati tecnici: - Controllo Ultimax 4 - scheda di rete - Software DXF - Cambio utensile 24 posti - Supporto SK40 - Velocità del mandrino 10-10.000 giri/min - Convogliatore trucioli - Ore di funzionamento 5279 Viaggio: - Asse X 1.020 mm - Asse Y 510 mm - Asse Z 610 mm Scopri di più qui - / Contattaci all'indirizzo -