torni usati in vendita (2,955)

x-axis: mmy-axis: mmz-axis: mmturning diameter: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: mmy-axis: mmz-axis: mmturning diameter: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: mmy-axis: mmz-axis: mmturning diameter: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Asse X: Asse MMY: Asse MMZ: MMDiametro: mmControllato: 0 Consumo totale di energia: kWpeso della macchina ca.: Spazio richiesto: m I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Diametro di rotazione: 375 / 560 mm Lunghezza di rotazione: 600 mm Controllo: HURCO x corsa: 220 mmy - Escursione: +/- 55 mmz - corsa: 670 mmW - asse (mandrino longitudinale): 740 mm Torretta (stazioni x): 12 x VDI 40 passaggio mandrino: 81 mm Consumo totale di potenza: 70 kWpeso della macchina ca.: 8 t-dimensioni della macchina ca.: 5,5 3,5 3 mPrezzo EXW / dalla fondazione Acquisizione prima del 20 febbraio 2026 I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 390 mmturning length: 2250 mmcontrol: Sinumerik 840D swing diameter: 610 mmcross movement. (x-axis): 605 mmlongitudinal traverse (z-axis): 1.870 mmy-axis: 210 mmb-axis: 240 °Axial travel (X2) / Longitudinal travel (Z2): 267/1.840 mmLongitudinal travel (Z3): 1.840 mmmain spindle: - clamping chuck diameter: 250-315-400 mmbar material dia.: max 82 mmspindle head: Ø 220H5 spindle bore: Ø 118 mmClamping tube inner diameter: 82 mmDiameter in front bearing: 180 mmCounter spindle: - clamping chuck diameter: 250-315-400 mmbar material dia.: 92 mmspindle head: Ø 220H5 spindle bore: Ø 118 mmClamping tube inner diameter: 104 mmDiameter in front bearing: 180 mmMain spindle drives left and right: - power requirement: 45/47 kWspeed area: 20 - 3.200 1/minBuckling speed: 650 1/mintorque: 650/ 1.080 NmC-axis speed: 3.200 1/minTorque C-axis: 660 1/minPartial accuracy C-axis: 0,025 ° ...

turning diameter: 660/275 mmturning length: 1498 mmcontrol: Fanuc/Mori Seiki MSX 701 total power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mm9-axis CNC turning and milling centre Fanuc MSX-701 CNC control Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. 40-position tool magazine 10-position turret at bottom, all positions driven 2 x 3-jaw quick-change chuck KNCS-N 315/91 KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system Chip conveyor Drain system for main spindle chuck (controlled via M function) Drain system for tool cutting edge (controlled via M function) Coolant gun incl. accessories Oil mist extraction Direct measuring system X1, X2, Y-axis Bar loader interface Double foot switch for both spindles Islands and pocket program ...

turning diameter: 400 mmturning length: 1100 mmcontrol: Siemens Sinumerik 840D SL greates pass round over bed: 500 mmSwing dia. over traverse guideway: 370 mmMain spindle:: Max. rpm: 5000 min/-1power capacity - main spindel: 17 / 25.5 kWmax. Torque: 345 Nmspindle diameter in front bearing: 130 mmspindle bore: 67 mmchucking diameter: 325 mmspindle nose: A8 axis stroke:: x-axis: 750 mmy-axis: +/- 100 mmz-axis: 1200 mmfeeds:: rapid traverse: 40 / 40 / 40 m/minTailstock:: tailstock: 1200 mmtaper of center: Mk 5 tension force: max. 8 kNmilling head: b-axis: +/- 120 °tool taper: HSK A 63 tool piece magazine with: 60 spindle turning speed - stepless: 12000 U/minspindle motor: 10,5 kWmax. torque on the spindle: 90 Nmtotal power requirement: - kVAweight of the machine ca.: 9 tdimensions of the machine ca.: 4,6 x 2,5 x 2,82 mEquipped with:- Siemens 840D SlimLine / Celos CNC control- 3-jaw ch ...

faceplate diameter: 1250 mmswing diameter: 1400 mmturning height: 1400 mmcontrol: Siemens 840D travel -x axis: -80 / +1100 mmtravel -z axis: 1060 mmworkpiece height max.: 1400 mmmax. workpiece weight: 8000 kgShank diameter: 200 x 240 mmtable turning speeds: 2- 400 U/mindrive capacity - spindle motor: 44 kWmax. torque on the faceplate: 14510 Nmrapid traverse: 12 m/minturning speed range - milling: 0,01 - 7,4 U/minspeeds of tool: 4 - 3000 U/minwork piece power: 22 kWTorque: 840 Nmtotal power requirement: 90 kVAweight of the machine ca.: tdimensions of the machine ca.: mequipped with:- CNC control Siemens 840Dsl- C-axis- driven tools- tool changer 12-fold (driven tools)- complete enclosure- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 900 mmtravel -y axis: 200 mmtravel -z axis: 800 mmB-axis swival range +/-: +90 / -20 °positioning accuracy: C: 9 control: SIEMENS number of spindle speeds: 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315The machine is in very good condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: PV315 | PV-315The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working diameter: 140 mmturning diameter: 185 mmworkpiece length: 120 mmcontrol: Siemens turning speeds: 7.000 U/minVertical Turning Machine | FAMAR - BISUB 160 2GThe machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: BISUB1602G | BISUB160 2G | BISUB-160 2GThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chuck diameter: 500 mmswing diameter over bed slide: 700 mmcontrol: Siemens travel -x axis: 630 mmtravel -z axis: 500 mmCNC turning and milling center vertical | EMAG - VMC 450 MTThe machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornazione: 550 mm, lunghezza di rotazione: 900 mm: Fanuc O-TC, fabbisogno totale di potenza: kWweight della macchina: ca.: 8165 kg, dimensioni della macchina ca.: m. I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

faceplate diameter: 2950 mmswing diameter: 3200 mmturning height: 3500 mmtable load: 20 tfeed range: 3000 mm/minmain drive motor: 70 kWmilling drive: 16,1 kWControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling headInspection under power in the factory possible.Machine location is Spain.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diametro della placca frontale: 5500 mm, diametro oscillazione: 6000 mm, altezza di rotazione: 4400 mm. Controllo: FAGOR 8055, regolazione trasversale delle rotaie: 3000 mmram: 1500 mm, peso del pezzo: 100 velocità della piastra frontale: 1 - 25 U/min, consumo totale di potenza: kWweight della macchina: circa dimensioni della macchina: m Adattamento nel 2015 con controllo CNC FAGOR 8055. I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 1220 mmturning length: 5000 mmcontrol: FAGOR 8055 TC swing diameter over bed slide: 880 mmspindle bore: 160 mmspindle turning speed range: 0 - 1000 U/mintransmission ratio: 4 tailstock quill diameter: 180 mmtailstock quill stroke: 260 mmmain drive motor: 40 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mIn 2020 overhauled:- Grinding of carriage guides on the X and Z axes- Preloading of X and Z axis ball screw nuts- New Turcite placed on the X and Z axis carriages- General review and disassembly of the engine and head regulator- General review and disassembly of the motors and regulators of the X and Z axes- Disassembly and inspection of the SAUTER tool holder- Checking and cleaning the electrical cabinet- Complete review of the hydraulic circuit CNC-control FAGOR 8055 TC Tool turret SAUTER 4-jaw chuck Ø 1000 mm 3-jaw chuck  ...

turning diameter: 400 mmturning length: 549 mmcontrol: HEIDENHAIN Eltropilot swing over bed: 570 mmtravel -x axis: 220 mmtravel -z axis: 635 mmmain spindle bore: 79 mmmain spindle speed: 25 - 5000 U/minmain spindle drive: 21 kWmax. torque on the spindle: max. 240 Nm: 120 mmc-axis, speed: 100 U/minC-axis: Haltemoment 200 NmC-axis resolution: < 0,04 °sub spindle bore: 56 mmsub spindle speed: 25 - 5000 U/minsub spindle drive: 9 kWmax. torque on the spindle: max. 72 Nm: 90 mmc-axis, speed: 100 U/minC-axis: Haltemoment 150 NmC-axis resolution: < 0,04 °feed power X/Z axis: 3,5 / 7 Nmrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/mintool turret: 1 x 12 Stationennumber of driven tool stations: 12 speed of driven tools: 4.000 U/mintotal power requirement: 44 kVAweight of the machine ca.: 5,7 tdimensions of machine L x W x H: 3,65 x 2,03 x 2,1 mAccessories: collet fixture HAINBUCH on ...

turning diameter: 250 mmturning length: 600 mmcontrol: FANUC Series 31i-Model A travel -x axis: 180 mmtravel -y axis: +/-45 mm- - - - - Main spindle - - - - -: - - - - - -turning speeds: 0 - 5.000 U/minbar capacity: 65 mm--- Subspindle ---: - - - - - -turning speeds: 0 - 7.000 U/minbar capacity: 42 mm--- upper turret 1 ---: - - - - - -numbers of positions in the tool changer: 12 tool taper: BMT 45 Number of axles: X1 / Y1 / Z1 St.Tools speed: 8.000 U/min--- upper turret 2 ---: - - - numbers of positions in the tool changer: 12 tool taper: BMT 45 Tools speed: 8.000 U/minNumber of axles: X3 /Y3 / Z3 St.--- lower turret 3 ---: - - - numbers of positions in the tool changer: 12 tool taper: BMT 45 Number of axles: X2 / Z2 St.Tools speed: 8.000 U/minCNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axis, three triplex  ...

turning diameter: 1010 mmturning length: 6000 mmcontrol: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mmbed width: 750 mmsteady: 820 mmRotating speeds: 1100 U/minlength of gap: 500 mmsteady: 450 mmspindle passage: 104 mmworkpiece weight: 7000 kgmain drive: 52 kWturning speeds: 5-900 U/mintotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mSerial number: 262/01Machine number: 08122394Quick-change tool postCoolant systemMonitorChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If y ...

turning diameter: 1010 mmturning length: 6000 mmcontrol: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mmbed width: 750 mmsteady: 450 mmRotating speeds: 1100 U/minlength of gap: 500 mmsteady: 450 mmspindle passage: 104 mmworkpiece weight: 7000 kgmain drive: 52 kWturning speeds: 5-900 U/minlive tooling: total power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mSerial number: 262/01Machine number: 08122394Quick-change tool postCoolant systemMonitorChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for you ...

turning diameter over bed: 1250 mmturning diameter over slide rest: 1250 mmturning length: 9000 mmturning speeds: U/minfaceplate: 1300 mm3-jaw chuck: 500 mmsteady: 2 centre distance: 10.000 mmbed width: 1250 mmturning dia. in gap: 1600 mmtotal power requirement: 54 kWweight of the machine ca.: 33 tdimensions of the machine ca.: mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your ...

turning diameter: 600 mmswing diameter: 680 mmturning height: 600 mmz-axis: 500 mmx-axis: 560 mmdrive of main spindle: 65/80 kWmain spindle speeds:: 2800 workpiece tool changer: 12 Plätzefeeds z-axis: 0,01-30.000 mm/minfeeds x-axis: 0,01-45.000 mm/minchuck: Rota NCR 630 mmcoolant: voltage: 400 Vfrequency: 50 Hzcontrol: Siemens 840 D pl total power requirement: 140 Aweight of the machine ca.: 18 tdimensions of the machine ca.: 6,5 x 3,8 x 4,20 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 540 mmswing diameter over face slide: 370 mmcentre distance: 3000 mmcentre height: 270 mmturning dia. in gap: 815 mmbed width: 344 mmspindle bore: 88 mmspindle diameter in front bearing: 133 mmspindle taper: 11 D1 Camlock turning speed range: 18-1400 U/minturning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mmface feeds: 0,03-0,5 mmmetric threading: 0,4-14 mminch threading: 2-72 G/1thread - module: 0,3-3,5 mmthread - DP: 8-60 Pitchtailstock quill diameter: 75 mmquill stroke: 230 mmtaper of tail spindle: MK 5 slide valve travel: 280 mmupper head travel: 150 mmOverall size: ca. 4700 x 1100 x 1400 mmweight: ca. 3200 kgpower capacity: 9,4 kWAccessories:3-axis digital display FagorRöhm wedge bar chuck Ø 315 mmMultifix steel holder size Cincl. 6 interchangeable cassettesRotating center pointTurning chuck guardRear chip guardCoolant deviceWor ...

turning diameter: 360 mmturning length: 1000 mmswing diameter over bed slide: 360 mmcentre height: 180 mmturning speeds: 70-2400 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 680 kgdimensions of the machine ca.: 2000x1500x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mmturning length: 2.000 mmcontrol: FAGOR 8055 turning diameter over slide: 470 mmfeed: 8 m/minspindle nose: DIN-55027-11 spindle passage: 104 mmnumber of spindle speeds: 0-1600 U/min/rpmspindle drive: 17/ 20.5 kWTorque: 1590/1920 Nmtotal power requirement: 28 kWweight of the machine ca.: 4.9 tdimensions of the machine ca.: 6.600 x 2.300 mmTailstockTailstock quill diameter: Ø 100 mmTailstock quill travel: 200 mmTailstock quill taper: Morse taper MT 6Turret4-position automatic turretMachine EquipmentFull rear protection enclosureHydraulic 3-jaw chuck SMW AUTOBLOCK 400 GHFixed steady rest, capacity 50–220 mmMaximum Permissible WeightsMax. workpiece weight between centers: 2,560 kgWith 1 steady rest / with 2 steady rests: 3,200 kg / 4,000 kgFree-standing, center of gravity at 250 mm: 800 kgThe data for this ad was created with ModulMWS - the software solution of Lo ...

centre height: 280 mmcentre distance: 1200 mmturning diameter over bed: 570 mmturning diameter over slide: 365 mmturning length: 1000 mmspindle taper: DIN 55027 Gr. 8control: Sinumerik 810 D SIEMENSbed width: 360 mmspindle bore: 62 mmturning speed range: 3 - 2500 U/minfeed:: 5000 mm / minrapid travel - longitudinal/face: 10 m/min3-jaw-chuck diameter: 250 mmquick change toolholder: SANDVIK Coromant Captodrive capacity - spindle motor: 25 kWtaper in tailstock-quill: MK 5 dia. of quill: 100 mmquill stroke: 190 mmcoolant: voltage: 400 Vweight of the machine ca.: 5,0 tdimensions of the machine ca.: 3,55 x 2,20 x 1,95 m- Serial No.: 2022-3742-03- CNC-Control SIEMENS Sinumerik 810 D- Rapid feed- Coolant equipment- Machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 840 mmturning diameter over slide rest: 640 mmturning length: 3300 mmspindle bore: 74 mmturning speeds: 7,1-1400 U/min3-jaw chuck: 315 mmsteady: rapid traverse: turning dia. in gap: 920 mmlength of gap: 370 mmtotal power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward t ...

turning diameter over bed: 3800 mmturning diameter over slide rest: 3200 mmturning length: 12000 mmfaceplate diameter: 3100 mmsteady: 2 bed width: 4000 mmturning speeds: 200 U/minworkpiece weight: 90.000 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHydrostatik SpindellagerungHydrostatik LynetteThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch ...

turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 6000 mmspindle bore: 82 mmturning speeds: 4,5-900 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: rapid traverse: total power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsc ...