fresalesatrici e centri di lavoro usati in vendita

Machine Number: 428 Operating voltage: 400 V Frequency: 50 Hz Connection: 14 kW Control: SFT TBS 200 The deep hole drilling machine is in mint condition after a general overhaul Operating hours read: 248 Specifications: Boring system: Number of spindles: 1 Drilling range in steel: 1 – 6 mm Drilling depth with dipping spindle: 120 mm Sealing case with one-piece bezel: 350 mm Only with sealing housing: 400 mm Max. workpiece length: 450 mm Max. rapid traverse: 4000 mm/min Spindle drive 2 kW at 2810 rpm 3.5 kV at 7880 rpm 1.5 kW at 23700 rpm Frequency range: 100 – 800 Hz Tailstock: Motor power: 0.75 kW Spindle speed: 500 rpm Max. instep stroke: 60 mm Pre-carriage drive for ball screw: 25 x 5 mm and servo motor Drill bush carrier permanently placed on the machine bed to accommodate the drill bells Drill bush holders and sealing housings from BOTEK Chip ejection downwards into the chip  ...

Pneumatic Tapping Machine Version with an adjustable angle, horizontal tapping possible Tapping machines for M3 - M12 threads, angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M12 metric Speed infinitely variable 400 rpm. Working pressure 6 - 8 bar Working range max. 1100 mm Weight 20 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5)

Machine Number: 2 Speed: 95 – 750 rpm Table diameter: 400 mm

Electric Tapping Machines for M16 - M42 Threads, Angle adjustable. 8 quick-change chuck with slipper clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Optional: Clamping table with grooves Type: FL-WB Thread diameter M16 - M42 metric Speed infinitely variable 50 - 200 rpm. Working range max. 1300 mm Motor power 1.2 kW Weight 105 kg Dimensions L x W x H 0.85 x 0.85 x 0.4 mm

Drilling and milling machines: digital depth and speed display, 2 gear stages with fine adjustment and variable speed, Includes left-right switch Left and right swivel head Comes with associated tools Drilling capacity in steel 25 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 16 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 280 mm Table adjustment longitudinal 155 mm Table clamping area 500 x 180 mm Connection voltage 230 V max. distance between work table and spindle nose max. 320 mm Total power requirement 0.8 kW Machine weight approx. 150 kg Dimensions approx. 670 x 550 x 910 m Condition: never used / new (5)

Serial Number: F1204050 Operating voltage: 3 x 400 V Frequency: 50 Hz Rated current: 3.5 A Connection: 1.5 kW Speed: 65-2000 rpm Table dimensions: 460 x 380 mm With 3 grooves and a vice Jaw bread: 125 mm

bore capacity in steel (diameter):55 mmarm length:1600 mmtotal power requirement:4 kWweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm

arm length:1600 mmweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm

Milling unit with holder for disc cutter sepatae drilling unit Deh Speeds 1750rpm 1.5 KW Pneumatic clamping unit see pictures

Machine number: 87794802 Operating voltage: 380 V Frequency: 50 Hz Connection: 350/500 W Speed: 350-3600 rpm Table dimensions: 270 x 220 mm With vise attached Jaw width: 95 mm Incl. platform

Table dimensions: 230 x 150 mm

Machine number: 248 Spindle speed: 60 – 1200 rpm Table dimensions: 700 x 520 mm With 2 grooves

Machine wheel: 419.324.012 Operating voltage: 380 V Frequency: 50 Hz Connection: 25 kW Spindle speed: 50 - 3000 rpm Center height above table: 240 - 1040 mm Table dimensions: 1050 x 1050 mm Feed: infinitely variable Row 2: 18 - 160, 35 -320 mm/min Rapid traverse speed: 3.5 m/minRated engine speed: 1400 rpm Drilling depth: up to approx. 1200 mm Included: 3 axes, digital display from the manufacturer Heidenhain and a coolant system

Column drill with: ARBO/CE approved protective cover. Quick-release chuck with pin. Tilting work table. Deep stop. Ejection wedge. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 120 mm Spindle mount MK 4 MK Table: 290 x 270 mm Column diameter 92 mm Speed 150 - 2450 rpm Total power requirement 1.1 kW Machine weight approx. 95 kg Dimensions L-W-H 0.66 x 0.8 x 1.7 m Condition: never used / new (5)

Speed: 208-1200 rpm Table dimensions: 300 x 260 mm Incl. vice Jaw width: 100 mm

Table dimensions: 770 x 200 mm With 1 groove Incl. 3 drilling stations Spindle speed: 700 – 5600 rpm Incl. various matching accessories

Electric taps for M3 - M12 threads, Angle adjustable. Quick-change chuck with slipper clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Thread diameter M3 - M12 metric Speed infinitely variable 312 rpm. Working range max. 1100 mm Weight 25 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5)

Pneumatic Tapping Machine Version with an adjustable angle, horizontal tapping possible Tapping machine for M3 - M16 threads, angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M16 Speed infinitely variable 250 rpm. Working pressure 6 - 8 bar Working range max. 1200 mm Weight 22 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5)

Column drill with: automatic feed Left/Right Rotation 2-stage motor Drilling capacity in steel 28 mm Projection 320 mm Drilling stroke 150 mm Table 500 x 320 mm Spindle Holder MK 3 Condition: unchecked (6)

Knuth SSB 40 Column Drill – 2.2 kW | Built in 1999 Specifications: • Manufacturer: KNUTH Werkzeugmaschinen GmbH, Germany • Model: SSB 40 • Serial number: 116876 • Year of manufacture: 1999 • Power: 2.2 kW • Voltage: 400 V / 50 Hz / 3 phases • CE certified Equipment and features: • Robust column drilling machine for precise drilling work • Solid machine stand with large work table • Cross table with vice included • Infinitely adjustable speed with digital display • Manual delivery with hand lever • Height-adjustable drill head • Ideal for metalworking, workshops and maintenance Condition: • Used, but in working condition • Optical traces of use, technically complete • No visible oil loss, no structural damage • Been in ongoing operation Scope of delivery: • Knuth SSB 40 drilling machine • Cross table with vice • Controls  ...

Table dimensions: 320 x 230 mm With 2 grooves

Operating voltage: 380 V Frequency: 50 Hz Rated current: 3.2/4.1 A Incl. rotary table Table diameter: 400 mm Incl. attached vise Jaw width: 110 mm

Modell:RB 50 | RB 63 | RB 80 bore capacity in steel (diameter):50 | 63 | 80 mmarm length:1600 | 2000 | 2500 mmworkpiece height max.:1220 | 1600 | 2000 mmDistance between spindle and column, max.:1600 | 2000 | 2500 mmDistance between spindle and column, min.:350 | 400 | 450 mmspindle taper MT:5 | 5 | 6 MKspindle turning speed range:25-2000 | 20-1600 | 16-1250 U/mintransmission ratio:16 Stk.feed range:0.04-3.20 | 0.04-3.2 | 0.04-3.2 mm/mindice table:630x500 | 630x800 | 800x1000 mmpower capacity:4 | 5,5 | 7,5 kWWeight approx.:3500 | 7000 | 11000 kgMachine size (LxWxH):2500x1070x2840 | 3080x1250x3291 | 3730x1400x4025 mmcube table GB/T6170:Größe siehe tech. Daten foundation bolts:6 Stückslots with screws:6 Stückreducing bush:MK 3/1, MK4/2, MK 4/3, MK 5/4 payment: 100 % before loadingwarranty:12 months

TOS HULIN WD 130A – Alesatrice universale per lamiere Anno di costruzione : 1998 Mandrino : 130 mm ( Ø ) Certificazione ISO 50 X : 6.000 mm Y : 2.500 mm Z : 1.000 mm (scatola mandrino) L : 800 mm ( mandrino ) B : 360° (piatto girevole) Z1: 1.500 mm (tavolo) Tavola rotante universale : 2.200 x 2.200 mm – 25 T Velocità del mandrino : 900 giri/min Motore mandrino : 37 kW Potenza totale : 60 kW Peso della macchina : 36 T (circa) Display digitale : Sì Piastra angolare : 2.000 x 500 mm (2 pezzi) Testa di fresatura verticale: 90° Dispositivo di scorrimento del viso

UNION BFK-2- Alesatrice da banco CNC Anno di costruzione : 1994 Revisione elettrica ed elettronica : 2005 Mandrino : 130 mm ( Ø ) Certificazione ISO 50 X : 3.000 mm Y : 1.600 mm Z : 1.200 mm (torretta) L : 800 mm ( mandrino ) B : 360/1° (piatto girevole) Tavola rotante CNC : 2000 x 1600 mm – 12,5 T Velocità di rotazione : 2.500 rpm Motore mandrino : 30 kW Potenza totale : 45 kW Peso della macchina : 36 T (circa) Sistema di controllo Heidenhain : Heidenhain TNC530

JUARISTI MDR 205 - Alesatrice CNC Anno di costruzione : 1992 Revisione elettrica ed elettronica : 2024 Mandrino : 205 mm ( Ø ) Certificazione ISO 50 X : 8.000 mm Y : 3.000 mm L : 1.250 mm ( mandrino ) Z : 500 mm (torretta) Z1 : 2.000 mm (tavola) Tavola rotante CNC : 3.000 x 2000 mm – 30 T Velocità del mandrino : 900 giri/min Motore mandrino : 34 kW Potenza totale : 74 kW Peso della macchina : 100 T (circa) Controllo : FAGOR 8055 Testina di traslazione angolare Piastra di base: 2.060 mm x 3.210 mm (3 pezzi) Trasportatore

Skoda W200H - Alesatrice per lamiere CNC - Manicotto per cuscinetti (RAM) Anno di costruzione : 1992 Revisione elettrica ed elettronica : 2021 Mandrino : 200 mm ( ) Certificazione ISO 60 X : 7.800 mm Y : 5.400 mm L : 900 mm ( mandrino ) Z : 900 mm ( Manicotto di trasporto / RAM 520 x 520 mm ) Z1 : 2.000 mm (tavola) Tavola rotante CNC : 2500 x 2000 mm – 40 T Velocità del mandrino : 0,8 - 800 giri/min Velocità di traslazione rapida: 6000 mm/min Motore mandrino : 75 kw Potenza totale : 140 kW Peso della macchina : 84 T (circa) Controllo : FAGOR 8055 Teste di lavorazione 3 pezzi 1. Testa di traslazione angolare 2. Testa di fresatura verticale 3. Testa di fresatura orizzontale Piastra di base : 4.480 mm x 1.145 mm Trasportatore

x-travel: 560 mmy-travel: 430 mmz-travel: 570 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc i-Seriespallet changing deviceautomatic tool changer for 30 toolschip conveyorcoolant deviceTechnische Daten / technical details:X-Weg / X-travel 560 mmY-Weg / Y-travel 430 mmZ-Weg / Z-travel 570 mmSpindelaufnahme / spindle taper BT40 Drehzahlbereich Spindel / spindle speed 10000 Upm /rpmEilgang X,Y,Z / rapid feed x,y,z 40,40,36 m/minTischabmessungen / table measures 712x490 mmWerkzeugwechsler / tool changer 30 fach / foldGewicht der Maschine ca. / weight 7800 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution  ...