fresatrici usati in vendita (2,493)

Auction-ID: A1-49027-200

Auction-ID: A1-49027-26

Auction-ID: A1-49027-51

Auction-ID: A1-49027-53

Auction-ID: A1-49027-215

Incluso tavolo di serraggio montato 3000x2000x300 Auction-ID: A7-32339-9

x-travel: 700 / 710 mmy-travel: 275 mmz-travel: 350 mmtaper in main spindle: ISA 40 table surface area: 900 x 250 mmT-slots: 3 x 18 x 60 Stk.turning speeds: 32.0 - 2000 U/minfeed stepless: 15 - 750 mm/minvoltage: 400 Vtotal power requirement: 4.0 kWweight of the machine ca.: 1400 kgrange L-W-H: 1000 x 1400 x 1800 mm from a training workshop (vocational school)Features:- Robust, electric-motor-driven universal milling machine- With horizontal and vertical main spindles Vertical main spindle can be swiveled 360° in two planes- Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment - Swiveling machine light- Control cabinet, installed on the right- Original operating instructions Machine data sheetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 330 mmtable surface area: 600 x 200 mmtable load capacity: 200 kgSpindle Speed: 40-2.000 U/min.tool taper: SK40 dimensions: 1200 x 1160 x 1800 mmmachine weight ab.: 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 510 mmy-travel: 450 mmz-travel: 410 mmtaper in main spindle: MAS BT 45° (SK40) table surface area: 800 x 395 mmT-slots: 6 Stk.turning speeds: 50 - 2500 U/minfeed stepless: 4-1600/4-1000 mm/minvoltage: 400 Vtotal power requirement: 5.0 kWweight of the machine ca.: 1400 kgrange L-W-H: 2300 x 2300 x 1800 mm from a training workshop maintained condition ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=iSTVEdv2fO8Furnishing :- robust universal milling machine- swiveling control panel, right front- rotatable universal milling head (re/li = 90°) with hydraulic tool clamping- manual milling spindle feed, with locking- swiveling milling spindle protection- Stable T-slot clamping/angle table- Axis feeds with rapid traverse- Central lubrication unit- Control cabinet, installed on the left Digital display - without functionThe data for this ad was created with M ...

x-travel: 1016 mmy-travel: 610 mmz-travel: 760 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 410 mmz-travel: 520 mmtotal power requirement: kWweight of the machine ca.: 2500 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mmy-travel: 600 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 280 / 300 mmy-travel: 250 / 270 mmz-travel: 300 / 310 mmturning speeds: 45 - 2240 U/minturning speeds: 18 Stufenspindle taper ISO: 40 quill stroke: 60.0 mmtable:: 670 x 320 mmtable load: 150 kgfeed range: 12.5 - 630 mm/minfeed: 18 Stufenrapid traverse: 1.200 mm/minworkpiece weight: max. 150 kgT-slots: 5x 12 x 63 mmtotal power requirement: 1.6 kWweight of the machine ca.: 1100 kgrange L-W-H: 1265 x 1080 x 1620 mm New price ~ 25.000 Euro () Special price upon request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=7IsC5cg9WlIFeatures:- Robust electric-driven universal milling machine- ACURITE 3-axis digital display with pivoting control panel, front right including emergency stop button- Electric adjustment of all axes (X/Y/Z axes) Rapid traverse in all 3 directions- Pivoting milling spindle guard- Coolant system- Lower chip tray- Vertical milling head wit ...

x-travel: 750 mmy-travel: 230 mmz-travel: 360 mmtotal power requirement: 5 kWweight of the machine ca.: 1.3 trequired space: 1.65x1.3x2.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mmy-travel: 155 mmz-travel: 350 mmtaper in main spindle: SK 30 / DIN 2080 table surface area: 640 x 200 mmturning speeds: 50 - 1500 U/minfeeds: 30 - 340 mm/mindistance spindle - column: 165 mmdistance spindle nose and table: 245 mmvoltage: 380 Vtotal power requirement: 1.3 kWweight: ca. 1250 kgrange L-W-H: 950 x 1000 x 1600 mm from a vocational school (!)Furnishing :- robust / conventional universal milling machine- rotatable / swiveling vertical milling head- Stable T-slot clamping/angle table- automatic table longitudinal movement- Feed range adjustable - 8x steps- Pole-changing drive motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mmy-travel: 560 mmz-travel: 520 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-48474-81

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 7 kWweight of the machine ca.: 1.8 trequired space: 2.3x2x2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): / mmx-travel: 1750 mmy-travel: 1250 mmz-axis: 1250 mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 600 mmz-travel: 460 mmtotal power requirement: 4 kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 375 mmz-travel: 250 mmtable-size: 205 x 800 mmT-slots: 4 x 45 14 H7speeds: 50 - 3150 U/mintool taper: 40 ISOquill stroke: 50,0 mmFeeds X + Z Axis: 5.0 - 1000 mm/minFeeds Y Axis: 5.0 - 670 mm/minrapid traverse: 2.4 / 1.6 m/mincontrol: Heidenhain total power requirement: 5.1 kWweight: 950 kgrange L-W-H: 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition ()Equipment:- MAHO universal tool milling/drilling machine- HEIDENHAIN TNC 135 positioning/path control 3-axis manual data input control Programmable by the machine operator Convenient and easy operation- Electric motor-driven feed rates in all axes (X/Z/Y) X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min- Tiltable milling head to both sides- Tiltable T-slot universal table- Vertical clamping range- Continuously ...

Auction-ID: A1-48474-51

x-travel: 400 mmy-travel: 390 mmz-travel: 350 mmControl: DIALOG4/CONTOUR 3 tool taper: SK 40 spindle turning speed range: 31 - 3150 U/minfeed range: 10 - 2000 mm/mintotal power requirement: kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1.600 x 2.500 x 2.000 mmCNC control DIALOG4/CONTOUR 3 Table: 700 x 480 mm rigid angle tableSwivel-type vertical milling headCoolant tankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2 x 3 x 3 mNo. 2456Universal tool milling machine MAHO MH 800Working area: 700 x 450 x 450Drive: 4 kWDigital display MitutojoUniversal built-in rotary table 1050 x 627 mmQuill feed gear 0.02 - 2 mm/revSpindle ISO 40,Speed range 32 - 1600 1/min,feeds 5-500 mm/min,rapid traverse 1.4 (0.7) m/minCross table movement by hand 225 mm,Table top rotation 360 °Table swivel/tilting +- 30 ° eachSpace requirement approx. 2 x 3 x 3 m,Weight approx. 3.3 to.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmy-travel: 400 mmz-travel: 370 mmControl: Retrofit Dialog 11 - 7.07 table surface area: 1400 555 mmtotal power requirement: 5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 332,2 mPacking: 3 mRetrofit by FPSAlternate NC - Rotary Table availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 290/300 mmy-travel: 150/160 mmz-travel: 330/340 mmtotal power requirement: kWweight of the machine ca.: 675 kgdimensions of the machine ca.: 2700 x 2500 mmThe machine was overhauled by the company Harich in 2017.Machine number: 57330/08Technical data:Table longitudinal movement (motorized/manual): 290/300 mmSpindle head transverse movement (motorized/manual): 150/160 mmSupport vertical movement (motorized/manual): 330/340 mmAngle table clamping surface: 600 x 210 mmSpindle speeds: 40 – 2000 rpmTool holder: Standard taper 40Motor power: 1.5/1.9 kWFeed rate range (infinitely variable): 5 – 500 mm/minRapid traverse: 1200 mmEquipment:3-axis digital readout (Heidenhain)Vertical milling spindle with quill adjustmentAdditional horizontal spindleREPAR 2 safety device (www.repar2.com)Operating manualThe machine will be loaded onto a Euro-pallet, total height: 1900 mm.The data for t ...

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: Heidenhain TNC 113 total power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5152Universal tool milling machineDeckel FP 4 M (K) - 2203Working area: 500 x 400 x 400Drive: 4 kWSpindle holder SK 40 / DIN-2080Speed range 50 - 2,500 min-1Feed rates 8-630 mm/min steplessRapid traverse 1.3 m/minFixed table 800 x 460 mmChip trayHeidenhain TNC 113 Active Digital readoutSpace requirement approx. 2 x 2 x 2mWeight approx. 1,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mmy-travel: 1350 mmz-travel: (Vert.) 1600 mmControl: Heidenhain iTNC 530 table surface area: 4200 x 1150 mmtable load: 13 ttool taper: ISO 50 spindle turning speed - stepless: 0 - 3000 U/mintransmission ratio: 2 spindle motor: 28/38 kWfeed range: 5000 mm/minrapid traverse: (X/Y) 12 m/minrapid traverse: (Z) 10 m/minweight of the machine ca.: 37 tdimensions of the machine ca.: 12,9 x 6,53 x 3,79 mIn January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro.Working hours (dated 31. July 2025):Machine on: 38.483 hAuto cycle: 12.798 hSpindle hours: 11.645 hA current geometry measurement report is available. CNC-control HEIDENHAIN iTNC 530 Electronic handwheel 50-position tool changer Controlled universal milling head, indexable 2.5 / 2.5 deg. Coolant device Cooling through the spindle 2 chip conveyors Oil cooler Measuring ...

x-travel: 700 mmy-travel: 560 mmz-travel: 450 mmtotal power requirement: 3 kWweight of the machine ca.: je 2,5 tdimensions of the machine ca.: je 332,5 mBundle 6 x KF 3 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 315 mmy-travel: 180 mmz-travel: 320 mmtaper in main spindle: ISO 40 table surface area: 600 x 250 mmT-slots: 5 Stk.turning speeds: 45.0 - 1950 U/minfeed stepless: 10 - 170 mm/minvoltage: 400 Vtotal power requirement: 5.1 kWweight of the machine ca.: 1300 kgrange L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained ()Features:- Robust electric motor universal milling machine- HEIDENHAIN 3-axis digital display- Rotatable universal milling head (right/left = 90°)- Manual milling spindle feed, with lock- Stable T-slot clamping table- Axis feed with rapid traverse in X+Z+Y axis Rapid traverse continuously adjustable - Swiveling machine light- Control cabinet, installed on the left- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.