fresatrici usati in vendita (2,496)

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 83 / 57 Nmtool taper: SK 40 DIN 69871table:: table surface area: 700 x 500 mmmax. table load: 500 kgT-slots: 7x 14 x 63 mmtool magazin:: number of toolpositions: 60 pos.max. tool weight: 6 kgmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmchange-time tool to tool: 1,6 secchange-time chip to chip: 8,0 secfeeds:: rapid traverse: 24 m/minFeed force ( X / Y / Z ): 4,5 kNfeed speeds: 1 - 24.000 mm/mintotal power requirement: 26 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 4,5 x 3,5 x 2,3 mDocuments: Chip conveyor: Coolantsystem: through spindle coolant: 20 bar Rotary screen: elektr. hand wheel: Signal lamp - 4 colour: direct tra ...

x-travel: 1000 mmy-travel: 450 mmz-travel: 450 mmtable surface area: 1370 x 400 mmnumber of T-slots: 5 Stck.spindle turning speed range: 32 - 1500 U/min: mm/minfeeds Z-axis: mm/mintool taper: SK 50 total power requirement: 7,0 kWweight of the machine ca.: 3,1 tdimensions: 2,1 x 1,7 x 1,9 mMilling machine with- Heidenhain TNC 135- Rapid traverse- Milling head with hydraulic tool cutting- Coolant system- Central lubricationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8.500 mmy-travel: 2.000 mmz-travel: 1.500 mmControl: HEIDENHAIN iTNC530 rapid travel x/y/z: 25.000 mm/mintable-size: 10.000 x 1.350 mmtable weight: max. 5 t/qm milling head: orthogonal 1° x 1° tool taper: SK- 50 number of spindle speeds: 4.000 U/min/rpmpower capacity: 37 kWmax. torque on the spindle: 900 NmInternal cooling system: 15 bartool change unit: 60 pos.handwheel: HR 410 Chip coveyor: Inkl. Machine on: 39.000 hSpindle hours: 16.000 htotal power requirement: 75 kWweight of the machine ca.: 35 tdimensions of the machine ca.: 12,7 x 5,2 x 4,6 mOrthogonal milling head, water-cooled, with 1° indexing in 2 axes (360 positions in the rear plane and 270 positions in the front plane)3D wireless probe M&H 20.41Partition wall for parallel operation/setupInternal air blastAdapter for high-speed milling spindles with torque supportOperator platform moves with the machineMonitored ...

: 1200 mm: 580 mm: 600 mm: 1575x425 mm: SK 40 : 152 mm: 110 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmControl: Heidenhain TNC 124 turning speed range - spindle: U/mintransmission ratio: drive capacity - spindle motor: kWtension force: kNswivellable: manuell +/-45 °max. tool diameter: 125 mmmax. tool weight: 6 kgtable surface area: 400 x 800 mmT-slots: 5x14x80 max. table load: 400 kgfeed speeds: X/Y: 0 - 6.000 mm/minfeed speeds: Z: 0 - 4.000 mm/minrapid traverse: X/Y: 6 m/minrapid traverse: Z: 4 m/mintotal power requirement: 11 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,9 x 3,5 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6000 mmy-travel: 2500 mmz-travel: 1500 mmspindle turning speed - stepless: 5000 U/minspindle motor: 42 kWfeeds longditudinal/cross/vertical: 15000 mm/minrapid motion -longitudinal/cross/vertical: 35 m/minno. of tools in the magazine: 60 Stückcontrol: HEIDENHAIN TNC 640 total power requirement: ca 90 kWweight of the machine ca.: 73,5 t- CNC Control Heidenhain TNC 640- Rotary-translating table 2000 × 2500 mm, load capacity 30,000 kg- Worktable 2500 × 2500 mm,- tool magazine, 60 tools, ISO 50- Laser tool integrity probe- workpiece alignment measuring probe- Coolant system- Chip conveyor- Anchoring and leveling equipment for X axis 6000 mm- Vibration detection sensor- Double cradle for loading/unloading two milling heads, with dedicated software.- Automatic head clamping system for mechanical heads + electrospindle heads- Universal head with thousandth-degree positioning, 37 kW- ...

x-travel: 6000 mmy-travel: 2000 mmz-travel: 1250 mmspindle turning speed - stepless: 5000 U/minspindle motor: 34 kWfeeds longditudinal/cross/vertical: 15000 mm/minrapid motion -longitudinal/cross/vertical: 35 m/minno. of tools in the magazine: 40 Stückcontrol: HEIDENHAIN TNC 530 total power requirement: 60 kWweight of the machine ca.: - t- CNC Control Heidenhain TNC 530- Rigid tapping for mechanical heads,- AUTOCAL software for automatic calibration- 3D workpiece alignment measuring probe.- Semi-automatic accessory change- Hydrostatic rotary-translating table TRT15, size: 2000 × 2000 mm, 15t, V-Axis 1500mm- Universal bi-rotary head with thousandth-degree positioningTaper: BT 50- Double cradle for loading/unloading two milling heads, with dedicated management software- Chain-type tool magazine, 40 positions, ISO 50- High-pressure coolant system, external/internal through the tool, with  ...

max. wheel diameter: 406,4 mmgear width: 66 mmmax. module: ca. 12,5 min. module: Control: Zyklengesteuert total power requirement: 21 kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: 3,3 x 2,5 mThe GLEASON 641 G-PLETE bevel gear generating machine is a proven and robust solution for the production of spiral bevel gears, hypoid gears, and Zerol bevel gears usingthe well-established Gleason generating method.Designed for reliable and repeatable machining processes, this machine is ideally suited for small to medium batch production in industrial gear manufacturing.The 641 supports both roughing and finishing operations in a single setup (completing process), ensuring consistent gear quality while reducing handling time. Its mechanical generating system with variable roll ratio and plunge feedmechanism allows precise control of the tooth geometry, making it a dependable ch ...

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mQ U O T A T I O NWe are pleased to offer you ex our stock, subject to prior sale, and error in technical data :DECKEL MAHO CNC Universal Milling Machinemodel DMU 50 Myear 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual + 95 / - 10 °Table area Ø 700 x 500 mmInclination range of table (manually) +95 / -10 °Rotation of table (manually) 360 °Max. Table load approx. 200 kgMaximum distance table – spindle nose 550 mmhorizontal distance machine – spindle nose 210 – 610  ...

x-travel: 380 mmz-travel: 140 mmdist. cutter spindle - workpiece spindle: 370 mmdistance spindle - column: 163 mmtable-size: 630 x 150 mmquill stroke: 40 mmmilling head -swivable: 360 Gradspindle turning speed range: 120-2000 U/mintable feed: 35/65/170 mm/minvoltage: 380 Vweight of the machine ca.: 130 kgtotal power requirement: 0,5 kWdimensions of the machine ca.: 0,91 x , 0,68 x 1,80 mIncludes 32-piece collet setIncludes base cabinet with keyIncludes small partsIncludes operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 880 mmtravel -y axis: 630 mmtravel -z axis: 630 mmcontrol: HEIDENHAIN - TNC 426M number of spindle speeds: 12.000 U/minnumbers of positions in the tool changer: (2 x 16) 32 Tool bore: SK 40 surface area: 1.250 x 700 mmtable load: 600 kgMilling machining centers - universal | DMG - DMU 80T equipped with B axis The machine is in good condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: 80 T | 80-TThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Produttore: Mikron Modello: UME600 Anno di produzione: 1995 Tipo di macchina: fresatrice CNC Unità di controllo: Heidenhain TNC407 Rastre del mandrino: SK 40 Velocità del mandrino: massimo 5.000 giri/min Velocità di avanzamento: massimo 10.000 mm/min Dimensione del tavolo: circa 900 × 530 mm Traiettoria di percorso: X 600 mm / Y 500 mm / Z 450 mm senza cambiatore automatico degli utensili Potenza del motore: massimo 9 kW Peso: approssimativamente: 3.200 kg Condizione: - Usata, buone condizioni complessive - Completamente funzionante e pronto all'uso Attrezzatura / Accessori: - pompa del liquido refrigerante - morsa macchina - Sonda 3D - Vari set di colletti / portautensili SK 40 - Cassetta degli attrezzi con piano di lavoro e

x-corsa: 1200 mmy-corsa: 600 mmz -corsa: 500 mm Controllo: Dialog 11 intervallo di velocità di rotazione: 0 - 6,300 U/minshaftle taper ISO: 40 fabbisogno totale di potenza: 10 kWweight della macchina ca.: 8 tdimensioni della macchina ca.: 4 x 3 x 2,5 m I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

x-travel: 1600 mmy-travel: 710 mmz-travel: 700 mmControl: HEIDENHAIN, TNC 124 table surface area: 2200 x 550 mmspindle taper: SK 50 DIN 69871 spindle turning speed - stepless: 40 - 1600 U/minspindle drive: 11 kWfeed X/Y/Z-axis: 2000/2000/1000 mm/min.rapid traverse X/Y/Z axis: 5000/5000/2500 mm/minfeed motor: 3 kWdistance table / vertical spindle: 50 - 750 mmdistance table/horizontal spindle: 60 - 760 mmtable load: max. 3000 kgtotal power requirement: 15 kWweight of the machine ca.: 8 tdimensions of machine L x W x H: 3,50 x 2,82 x 2,70 mAccessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 500 mmz-travel: 400 mmtable-size: 900 x 530 mmcontrol: Heidenhain TNC 355 tool adaptor: ISO 40 | |turning speed range: 40- 4000 U/minrapid speed: 5 / 6 m/minfeed speeds: 2 - 3000 | mm/min |power requirement: 6 kWtable load: 350 kgdimensions: 2,6 x 1,8 x 2,2 mweight: 2,6 tUnivers. milling machine 3 axis- external electric handweel- housing- universal headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.150 mmy-travel: 710 mmz-travel: 710 mmb-axis: +30 / -120 °surface area: 1.500 x 795 mmmilling head: universal, stufenlos spindle: 28 kWturning speeds: 20 - 18.000 U/mintool changer: auto. number of tools: 60 Control: HEIDENHAIN iTNC530 weight of the machine ca.: 12 tdimensions of the machine ca.: 6 x 3,2 x 3,4 mCNC universal milling machine in a very stable ‘monoBLOCK’ design, ideal for single-part andsmall-batch production with swivel spindle, NC dividing head and tool magazine.• NC-swivel milling head hydraulically clampable, with HSK-A63 spindle taper and 18,000rpm motor spindle• LEHMANN vertical NC dividing head mounted on the machine table for 5-axissimultaneous machining with tailstock• DMG ERGOline® Control with 19 screen and HEIDENHAIN iTNC530 3D contouringcontrol• Production package with RotoClear viewing window, 600-litre coolant tank, chip flushingin  ...

max. wheel diameter: 500 mmgear width: 400 mmmax. module: 10 mmControl: SIEMENS Sinumerik 840D sl max. workpiece diameter: 500 mmMax. Distance from table to counterholder: 1.120 mmMax. Distance table to center of milling spindle: 585 mmMin./max. center distance between milling spindle: 50/475 mmtable diameter: 420 mmtable hole - depth: 150 mmTable equipped with hydraulic clamping device: : milling spindle: : milling spindle speeds: 48- 480 1/min stufenlosmilling head swivelling angle: +/- 50 A-Achse Gradtool taper: SK 40 Tangential path of the milling carriage: 200 mmmilling cutter diameter: 170 mmMax milling width: 250 mmelectrical supply data: : voltage: 400 Voperating frequency: 50 Hzconnecting power: 55 kVAweight of the machine ca.: 10,5 tdimensions of the machine ca.: 6,2 x 4,2 x 3,e mEquipment and Accessories• High-performance CNC gear hobbing machine LIEBHERR LC502, particula ...

x-travel: 300 mmy-travel: 160 mmz-travel: 290 mmtable surface area: 600 x 210 mmtool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1,2 m/minspindle motor: 1,5 / 1,9 kWtotal power requirement: 9,5 kVAweight of the machine ca.: 830 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine is in very good condition and comes from atraining workshop.Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123- Manual mode: Manual operation and positioning with manual input- Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing ManualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 5000 mmy-axis: 4000 mmz-axis: 1400 mmdistance between columns: 3500 mmspindle motor: 22/26 kWspindle turning speed range: 6000 U/minrapid traverse: 15 m/mintable-size: 5020 x 3000 mmworkpiece weight: 16 tControl: FANUC 0i-iMF distance table - lower edge spindle: 200 - 1600 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m5 Sided Machining Center equipped with:- CNC Control FANUC 0i-MF (10.4 LCD)- ATC 60-fold (BT 50)- Coolant through Spindle- X/Y/Z axis linear guide way- X/Y linear ScalesHeads:-- 90 degree head (auto 5 degree indexing)-- 200mm extension 90 degree head (mounted on table)-- 350mm extension head (mounted on table)- Air conditioner- Oil skimmer- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mmy-travel: 600 mmz-travel: 500 mmNC-rotary table: 630 mmspindle taper: SK 40 spindle turning speed range: 18 - 6300 U/mincontrol: DIALOG 4 feed: 2 - 3600 mm/minrapid traverse: 6 m/mintable load: max. 485 kgquill stroke: 80 mmspindle drive: 9,5 kWtotal power requirement: 20 kVAweight of the machine ca.: 4,6 tdimensions: 3,8 x 2,24 x 2,35 mAccessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 485 mmy-travel: 385 mmz-travel: 380 mmtable surface area: 800 x 460 mmspindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/minfeeds: 10 - 1000 mm/minrapid traverse: 2 m/mintable load capacity: 600 kgquill stroke: 80 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,0 tdimensions: 2,4 x 1,7 x 1,98 mAcc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant- movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Viaggio X: 500 mmY - Viaggio: 400 mmz - Viaggio: 400 mm Consumo totale di potenza: 4,4 kWpeso della macchina ca.: 2 tdimensioni della macchina ca.: 222,2 m I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Viaggio X: 1500 mmY Corrita: 800 MMZ - Corrita: 800 mm Dimensione della tavola: 2.200 x 750 mm Ruota a mano: Inchiostro. Numero di velocità del mandrino: 3.000 U/min/rpmdrive del fuso: 15 kWW Scalo: SK - 50 Controllo: Heidenhein TNC 426 Potenza totale richiesta: 30 kWpeso della macchina ca.: 9,5 tdimensioni della macchina ca.: m I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

spindle taper: 2 x SK 40 forward bearing diameter: 110 mmmilling head speed: 100 - 4500 U/minmilling drive: 5,1 kWworkpiece length - max.: 830 mmworkpiece dia. with double equipment: max. 135 mmtaper diameter: 78 g6 mmcentre height: 260 mmturning speed range - stepless: max. 15 U/mindistance of spindles: 135 mmspindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mmFeed speed: max. 6 m/min.surface area: 200 x 1750 mm: tool post (Z-axis): stroke of tool slide: 120 mmFeed speed: max. 2 m/min.column movement: 200 mm: tail stock: tailstock quill stroke: 100 mmmorse taper: 3 MKcentre height: 260 mmaxial distance of the quills: 135 mmpassage of steadyrest: 40 - 80 mmcontrol: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 twith SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolantThe data for this  ...

x-travel: 2800 mmy-travel: 1000 mmz-travel: 1200 mmtable surface area: 2000 x 800 mmrotary table dia.: 800 mmspindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/minmax. torque on the spindle: 3000 Nmspindle drive: 30 kWfeeds longditudinal/cross/vertical: 2 - 2000 mm/minrapid motion -longitudinal/cross/vertical: 7 m/mincontrol: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mmwotkpiece diameter with 2 vacant positions: 200 mmworkpiece length: 400 mmweight of tools max.: 16 kgtool changing time: ca. 8 - 9 secinternal coolant system feed: ja / yes total power requirement: kWweight of the machine ca.: 25,4 t= 5-axis CNC-bed-type milling machine with integrated NC-rotary table andNC-swivelling milling head -Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump and filtration  ...

x-travel: 6.500 mmy-travel: 1.800 mmz-travel: 1.300 mmcontrol: HEIDENHAIN TNC 640 clamping table: - surface area: 8.000 x 1.100 mmmax. workpiece weight: 13.500 kg/m²Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° HirtverzahnungConstant Power at 100 % ED: 37 kWSpeed range, stepless: 15 - 7.000 min-1max. torque: 1.045 Nmtool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mmworkpiece length: 400 mmweight of tools max.: 20 kginternal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/minrapid in X/Y/Z: 35.000 mm/minmax. feed force X-Y-Z-axis: 16.000 Ntotal power requirement: kWweight of the machine ca.: 34 tdimensions of the machine ca. ...

x-travel: 4.700 mmy-travel: 1.250 mmz-travel: 1.500 mmcontrol: HEIDENHAIN iTNC 530 clamping table: - surface area: 5.000 x 1.000 mmmax. workpiece weight: 10.000 kgT-slot number x size: 7 x 22 Abstand 140 mm Universal Milling Head: _ Swiveling area front/back level: automatisch Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 37 kWSpeed range, stepless: 35 - 4.500 min-1max. torque: 880 Nmtool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/240 mmworkpiece length: 300 mmweight of tools max.: 25 kgfeeds: - X-, Y- and Z-axis, stepless: 6 - 15.000 mm/minrapid in X/Y/Z: 25.000 m/minmax. feed force X-Y-Z-axis: 10.000 Ntotal power requirement: kWweight of the machine ca.: 35 tdimensions of the machine ca.: 12,7 x 5,6 x 4,2 mEquipment / Accessories:Heavy-duty bed-type ...

x-travel: 4000 mmy-travel: 2500 mmz-travel: 1300 mmControl: Heidenhain TNC 640 table-size: 4000 x 2500 mmtable load: 10 t/m²spindle turning speed range: 18000 U/mintool taper: HSK A 63 feed: 40.000 mm/minspindle motor: 33 kWA-Axis: +/- 185 °c-axis: +/- 270 °distance between columns: - mmPassage height: - mmtotal power requirement: - kWweight of the machine ca.: 44,5 tdimensions of the machine ca.: - mEquipped with:- Heidenhain TNC 640 CNC control- Tupce universal milling head (2 axes) for 5-axis machining- 80-position tool changer (HSK A63)- Coolant system- CE mark- Enclosure- Measuring head for workpiece measurementThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4.000 mmy-travel: 1.700 mmz-travel: 1.500 mmcontrol: HEIDENHAIN iTNC 530 clamping table: - surface area: 4.200 x 1.100 mmmax. workpiece weight: 10.000 kg/m²T-slot number x size: 7 x 22 mm Abstand 150 mm feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/minOrthogonal indexable milling head: - Swiveling area front/back level: 0,02 x 0,02 ° = 162 Pos., Power at S1/S6 ED: 30 kWSpeed range, stepless: 60 - 6.000 min-1max. torque: 1.500 Nmtool taper: SK 50 – DIN 69871 ZF - Gearbox: 2 Getriebestufen automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/200 mmworkpiece length: 400 mmweight of tools max.: 25 kgchanging positions: Horizontal/Vertikal total power requirement: kWweight of the machine ca.: 50 tdimensions of the machine ca.: 11,0 x 6,0 x 4,6 mEquipment / Accessories Universal milling head UAD, 0.02x0.02°, positioning via internal Hirth serr ...

x-travel: 5000 mmy-travel: 2500 mmz-travel: 1500 mm: 50 m/min.: 9000/9000/6000 N: 15000 U/min: HSK 100 : 44 / 35 kW: 360 °: +/- 110 °: 5000 x 3000 mmcontrol: Fidia C20 distance between columns: 4500 mmdist. milling spindle - table surface: mmtotal power requirement: - kVA: 38 t: - mUniversal - CNC 5-axis - HIGH SPEED - Portal machining centre inGANTRY design- CNC control FIDIA C 20- Milling head: T2K– Spindle MFW-1813/27/1 (HSK 100)– External coolant supply– Minimum quantity coolant dosing– Scraper conveyor– Ethernet connection– Hand-held control module- 5-position tool changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.