lavorazione della lamiera usati in vendita

plate thickness: 1.20 mmthroat: 270 (140) mmdistance between roll centers: 60.0 mmtotal power requirement: manuell kWweight of the machine ca.: 46.0 kgdimensions of the machine ca.: 600 x 250 x 500 mmFurnishing:- various replacement rollers- hand crank- front stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdown holder: 18 Stückno. of strokes: 15 Hub/minoil volume: 150 ltr.cutting angle: 1,2 °control: CYBELEC Cybtouchback stop - adjustable: 1000 mmwork height max.: 800 mmengine output: 11,0 kWweight: 8.100 kg.range L-W-H: 5000 x 2410 x 1650 mm-------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------Furnishing: - CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trave ...

sheet width: 2040 mmplate thickness: 3.0 mmthickness at Niro-steel: 1.5 mmno. of strokes: 50 Hub/mincutting angle: 1.4 Gradtable height: 750 mmdistance between columns: 2120 mmback stop - adjustable: 1.0 - 550 mmcolumn arm: 100 mmControl: manuell engine output: 5.5 kWweight of the machine ca.: 2050 kg.range L-W-H: 2600 x 1980 x 1400 mmFurnishing:- robust / motorized swing-cut guillotine shears- Shatterproof, torsion-free steel welded construction- compact and clear mechanical design- manual backgauge, with analogue position display adjustable from the front Continuous adjustment over the entire travel range Adjustment range 1.0 - 550 mm- Machine side stand with projection .. 100 mm- manual cutting gap adjustment- 1x hold-down bar- 1x long side stop- 2x support arms- 1x freely movable foot switch- rear sheet metal slide- 2x EMERGENCY stop buttons at the front- Connection cable including p ...

pressure: 60.0 tchamfer lenght: 2100 mmdistance between columns: 1700 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmoil volume: 150 ltr.voltage: 400 Volttotal power requirement: 7.5 kWweight: 5640 kgrange L-W-H: 3250 x 1960 x 2750 mm-------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA 53T (touchscreen)- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 stop fingers- controlled axes Y1 - Y2 - X - R - C (crowning)- electr. Crowning controlled by CNC- Upper deer foot tool with PS 135.85-R08, system A with quic ...

sheet width: 2020 mmplate thickness: 2.5 mm STupper clamping bar adjustment: 250 mmLower beam adjustment: 80.0 mmbending speed: 5.5 sec / Hubbending angle max.: 0 - 180 °Control: konv. work height max.: 930 mmback stop - adjustable: ca. 215 mmengine output: 2.6 kWweight: 1750 kgrange L-W-H: 2800 x 1200 x 1450 mmFeatures:- Robust electric-driven folding machine- Bending angle adjustment via electric potentiometer- Manual backgauge Adjustment via handwheel from the rear- Manual lower beam adjustment- 1x freely movable double foot switch- Main switch at the frontThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mmplate thickness: 6,0 mm ST 42thickness at Niro-steel: 4,0 mm VAcutting angle: 1,2 Gradno. of strokes: 28 Hub/minoil volume: 150 ltr.down holder: 11 Stückcontrol: CYBELEC CybTouchengine output: 11,0 kWback stop - adjustable: 1.000 mmtable height: 800 mmweight: 4.500 kgrange L-W-H: 3.010 x 2.100 x 1.640 mm-------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------Furnishing: - CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up a ...

Faceplate bending machine, faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine -Diameter faceplate: 1330 mm -clamped disc diameter: 775 mm -for an additional charge: other discs can be produced -Gear motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

punching pressure: 90.0 tpunch diameter: 31 in 22 mmstroke - stepless adjustable: 10 - 42 mmNumber of strokes per minute: ca. 26 throat: 250 mmL-beam: 120 x 10 mmround bar steel: 40.0 mmsquare edge steel: 40.0 mmshear: flat material: 400 x 20 mmblade length: 425 mmwork height max.: 1176 / 1200 mmtotal power requirement: 4.0 kWoil volume: 45.0 lweight: 1200 kgdimensions: 1210 x 690 x 1920 mm From a maintenance workshop vry good condition - rarely used () New price including accessories ~ 25.000 Euro Equipment:- Robust electro-hydraulic profile steel shears Punching station, flat steel shears, angle steel shears, profile steel shears- Continuously adjustable stroke- Very compact design- Support table at the notching and punching station- Square notcher- Flat steel blade, 425 mm long, with four cutting edges Also for 45° angle steel sections- Profile steel blade for cutting 90° angle stee ...

punching pressure: 45.0 tpunch diameter: 22 in 15.0 mmpunch diameter: 38 in 8.0 mmround bar steel: 30.0 mmsquare edge steel: 25.0 L-beam: 100 x 10.0 mmshear: flat material: 300 x 12.0 mmadjustment of stroke: 0 - 55 mmwork height max.: 940 / 1140 mmstrokes per minute: 34 punch diameter: max. 110 mmvoltage: 400 Vtotal power requirement: 4.5 kWweight: 1245 kgdimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon requestFeatures:- Robust electro-hydraulic profile steel shear- With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station- Continuously adjustable stroke- Very compact design- Support table at the notching and punching station- Side support surfaces- 1x freely movable foot switch- Central lubrication system- Connection cable + connectorThe data for this ad was created with ModulMWS - the softwa ...

punching pressure: 60.0 tpunch diameter: 28 in 15 mmpunch diameter: 38 in 11 mmadjustment of stroke: 0 - 60.0 mmround bar steel: 40.0 mmL-beam: 120 x 12.0 mmsquare edge steel: 35.0 mmshear: flat material: 200 x 20 / 300 x 15 mmblade length: 317 mmstrokes per minute: max. 25 work height max.: 900 / 1130 mmoil volume: 75.0 lvoltage: 400 Vtotal power requirement: 5.5 kWweight: 1440 kgdimensions: 1520 x 950 x 1780 mm From a maintenance workshop New price for basic machine including accessories ~ €17.000 Special price upon requestEquipment:- Electro-hydraulic profile steel shear- Punching station, flat steel shear, angle/profile steel shear,. notching station Including special equipment: bending station- Heavy-duty and stable welded construction- Continuously adjustable stroke- Very compact design- Support table at notching and punching station- Side support/storage surfaces- 1x adjustable ...

puncher: 50.0 tsquare edge steel: 30.0 x 30.0 mmround bar steel: 35.0 mmL-beam: 80 x 80 x 8.0 mmhole punching press: capacity (dia. x thick.): Ø 31.0 x 12.0 mmshear: flat material: 350 x 15.0 mmthroat: 175 mmwork height max.: 950 / 1050 mmtotal power requirement: 3.0 kWweight: 950 kgrange L-W-H: 1300 x 1100 x 1850 mm Good condition () Current new price approx. 16.000 Euro Special price upon requestEquipment:- Robust electro-hydraulic profile steel shears- With multiple workstations: Flat steel shears Profile steel shears Hole punch Notching station- Driven by hydraulic cylinders- Continuous stroke adjustment- Support table at punching station Including material stop Including material stripper- Support table for notching station (square notcher)- Side storage options- 1x GEKA electric contact length stop- 1x GEKA freely movable foot switch- Operating instructions (PDF)The data for this  ...

pressure: 30.0 tpunching cross-cut in cmm: 30.0 in 9.0 mmstroke: ca. 35 Hub/minthroat: 610 mmstroke - stepless adjustable: 0 - 28.0 mmoil volume: 35.0 lwork height max.: 1010 mmtotal power requirement: 4.0 kWweight of the machine ca.: 1200 kg.range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies)Furnishing:- electro-hydraulic hole punch, with large throat- Material/sheet metal scrapers including scraper plates- Large material support table, with adjustable depth stops- continuous stroke adjustment- freely movable foot switch including protective cover- Forklift pockets for easy transport- side storage area- lots of accessories + tools - including tool cabinet- Matrix base (for special size matrices)- Stamp holders (for special size stamps)- original user manuelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

pressure: 70.0 tpunching cross-cut in cmm: 27 in 20 mmpunching cross-cut in cmm: 32 in 14 mmwork height max.: 1060 mmcolumn arm: 500 mmweight of the machine ca.: 1500 kg.total power requirement: 7.0 kWrange L-W-H: 1550 x 1200 x 1950 mm good / well-maintained condition () New price approx. 21.000 euros Special price on requestEquipment:- electro-hydraulic hole punch, with large projection- large GEKA stop table with movable stop system- sheet metal stripper with stripper plates- stepless stroke adjustment- die base- 1x freely movable foot switch- operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80.0 tpunching cross-cut in cmm: Ø 25 in 23 mmstroke: 10 - 100 mmcolumn arm: 510 mmwork height max.: 1050 mmno. of strokes: 28 Hub/minpunch diameter: max. Ø 160 in 4.0 mmoil volume: 103 ltotal power requirement: 5.6 kWweight of the machine ca.: 2300 kg.range L-W-H: 1620 x 865 x 1980 mm good / well-maintained condition ()Furnishing:- heavy / robust electro-hydraulic hole punch, with large throat- Punching station with material/sheet metal scraper- large support table with movable stops- stepless stroke adjustment .. 10-100 mm- freely movable foot switch including protective cover- Crane hanging eye for easy transport- side storage areas- various punching tools (stamps + matrices)- Machine light- Collection container for punched material- Hydraulic unit, integrated- EMERGENCY STOP button, front- Three-phase motor, 400 volts, 50 Hz- User manual (PDF)The data for this ad was crea ...

pressure: 100 tpunching cross-cut in cmm: Ø 31 in 25 mmstroke: 10 - 50 mmcolumn arm: 510 mmwork height max.: 1100 mmno. of strokes: 14 - 45 Hub/minpunch diameter: max. Ø 90.0 mmoil volume: 103 ltotal power requirement: 7.5 kWweight of the machine ca.: 2400 kg.range L-W-H: 1750 x 1020 x 2050 mm maintained condition () New price without accessories approx. 25.000 euros Special price on request Furnishing:- heavy / robust electro-hydraulic hole punch, with large throat- Punching station with material/sheet metal scraper- stepless stroke adjustment .. 10-50 mm- freely movable foot switch including protective cover- hydraulic low pressure finder for foot switch operation- Crane hanging eye for easy transport- side storage area- Hydraulic unit, integrated- Three-phase motor, 400 volts, 50 Hz- original instruction manualThe data for this ad was created with ModulMWS - the software solution of ...

sheet width: 500 mmplate length: 1000 mmplate thickness: max. 6,0 mmpressure: 28,0 tthroat: 500 mmheight of stroke: 0 - 40 mmworking area: X = 1200 mmworking area: Y = 570 mmno. of strokes: max. 180 Hub/minpunch diameter: max. 105 mmwork height max.: 900 mmoil volume: 50 ltotal power requirement: 4,0 kWweight of the machine ca.: 2500 kgrange L-W-H: 2400 x 1580 x 1540 mm New price including accessories approx. 30.000 euros Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=VU9BWm7SC2gThe hydraulic punching machine ECCO LINE is specially designed for processingSheet metal and profile parts have been optimized. She stands out for herFlexibility and manufacturing precision. The machines in the ECCO seriesLINE are equipped with 28 t punching force in conjunction with the provenTrumpf tool system. Tool change time approx. 15 seconds (manually)How it ...

pressure: 80,0 tpunching cross-cut in cmm: 31,0 in 25 mmshear: flat material: 500x18 / 300x22 mmL-beam: 150 x 12 mmround bar steel: 50 + 25 mmsquare edge steel: 50 + 30 mmthroat: 510 mmblade length: 500 mmwork height max.: ca. 1.100 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 2000 x 1000 x 2100 mm from a maintenance workshopFurnishing:- Robust electro-hydraulic combined profile steel shears- Notcher, hole punch, bar steel knife, profile knife and tin snips- Stop table at the hole punch, with blank holder- Stop table at the notcher- 2x floating footswitches- Stroke adjustment for fast stroke sequence- 1x PEDDINGHAUS contact length stop: 1.000 mm- Safety devices- Operating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 205 mmside roll diameter: ~ 195 mmControl: konv. oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 5.5 kWweight: 3200 kgrange L-W-H: 4500 x 1500 x 1300 mmFeatures:- Robust electro-hydraulic 3-roll bending machine- 3-roll concept offers a wide range of bending and rounding options- Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks- Diameters of up to 1.1 times the top roll diameter are possible- Forged and hardened rolls with a hardness of 53-55 HRC- Low-maintenance, stable machine design- Sturdy welded steel construction- Electro-hydraulic folding bearing for easy pipe removal- Pressure gauge / pressure indicator for the rolls- Safety device (safety lanyard with switch unit)- Operating instruc ...

sheet width: 2050 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 220 mmside roll diameter: ~ 170 mmdiameter of lower rolls: ~ 190 mmbending speed: ca. 2.0 + 5.0 m/minControl: ELAP LYNX oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 5.5 kWweight: 5000 kgrange L-W-H: 3500 x 1550 x 1400 mm Very good condition () Current new price including accessories approx. 90.000 Euro Special price upon requestEquipment:- Robust electro-hydraulic 4-roll bending machine- 4-roll concept offers a wide range of bending and rounding options- MG NC control unit ELAP LYNX Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks Freely movable control panel- Two central rolls are directly driven by hydraulic motors- Conical rolling is possible by tilting the rolls- Parallelism of the side rolls via torsion shafts- Pre-b ...

sheet width: 4100 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 350 mmside roll diameter: ~ 300 mmbending speed: ca. 2.0 + 5.0 m/minoil volume: 125 Litervoltage: 380 Vtotal power requirement: 11.0 kWweight: 9150 kgrange L-W-H: 5600 x 1700 x 1500 mm Very good condition () Current new price including accessories approx. 135.000 Euro Special price upon requestFeatures:- Robust electro-hydraulic 3-roll bending machine- All 3 rolls directly driven via planetary gears- Conical rolling possible by tilting the rolls- Parallelism of the side rolls via torsion shafts- Double-sided bending- Diameters of up to 1.1 times the top roll diameter are possible- Forged and hardened rolls with a hardness of 53-55 HRC- Low-maintenance, stable machine design- Permanent lubrication of all bearings- Sturdy welded steel construction- 1 mobile control panel with digital position in ...

sheet width: 3100 mmplate thickness: 13.0 mm STpre-bending: 10.0 mm STdiameter of upper rolls: 300 mmside roll diameter: 270 mmbending speed: 4.5 m/minvoltage: 415 Vtotal power requirement: 11.0 kWweight: 8200 kgrange L-W-H: 5090 x 1620 x 1630 mm Current new price including accessories approx. 100.000 Euro Special price upon requestEquipment:- Robust electro-hydraulic 3-roll bending machine- Induction-hardened rolls- Robust machine body + stable welded construction- SIEMENS ELGO digital position indicator Position indicator for the two side rolls- Freely movable control panel- Curved side roll feed- Electro-hydraulic conical bending device- Electro-hydraulic safety chuck- Pressure gauge/pressure indicator for the rolls- Operating instructions (PDF) Special equipment included:- 2x AK BEND SIDE supports (lateral sheet metal support system)- Bending rolls with profile roll extension Include ...

sheet width: 1020 mmplate thickness: 3.3 mmSheet thickness / Pre-Bending: 3.0 mmroll length: 1040 mmspeed: ca. 4.0 m/minroll diam. toproll: 110 mmroll diam. bottom roll: 110 mmRoller diameter / side roller: 110 mmAdjustment range of the side roller: ca. 85.0 mmwork height max.: ca. 835 mmtotal power requirement: 2.0 kWweight: 525 kgrange L-W-H: 1925 x 985 x 1450 mm from a maintenance workshopEquipment:- Robust electric-driven roll bending machine for single and series production- Manually adjustable side roller (2 hand cranks)- Manually adjustable lower roller (eccentric hand lever)- Asymmetrical roller arrangement- Manually swiveling upper roller- Rollers with profile inlets- Safety enclosuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 8.0 mm STpre-bending capacity: 6.0 mm STupper roll diameter: 230 mmside roll diameter: 230 mmwork height max.: ca. 840 mmControl: konv. 0: 400 Vtotal power requirement: 7.5 KWweight: 6000 kgrange L-W-H: 4700 x 1250 x 1300 mm- in checked condition - machine video -https://www.youtube.com/watch?v=SAxcRq3m9PwEquipment:- electro-hydraulic 3-roller round bending machine- all rollers are driven- analogue position display of the side rollers- hand wheels for adjusting the parallelism- easy adjustment of the sheet- operation via hand lever - front- hardened rollers SAE 1050 CK 45- electro-hydraulic folding bearing for removing closed pipes- electrical safety device- central lubrication- connection cable + connection plugThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 5.0 mm STpre-bending capacity: 4.0 mm STupper roll diameter: 150 mmlower roll diameter: 150 mmside roll diameter: 150 mmwork height max.: ca. 750 mm: max. 12.0 mmControl: konv. 0: 400 Vtotal power requirement: 3.0 KWweight: 2250 kgrange L-W-H: 3250 x 1000 x 1300 mm- in checked condition - machine video -https://www.youtube.com/watch?v=wCioqStEx8UEquipment:- electro-motorized 3-roller round bending machine- all 3x rollers motor-driven Rollers in mint condition () Machine has bent almost only copper- electro-motor side roller adjustment including digital position display- manual bottom roller adjustment- with conical bending device Inclination of the side roller Workpiece limitation for cone with 45° incline: Working length max: 60% Bending performance max: 50%- hardened rollers SAE 1050 CK 45- manual folding bearing for removing closed pipes- Safety d ...

sheet width: 3050 mmplate thickness: 3.0 mm STpre-bending capacity: 3.0 mm STupper roll diameter: 170 mmlower roll diameter: 170 mmside roll diameter: 180 mmControl: konv. 0: 380 Vtotal power requirement: 3.0 KWweight: 4250 kg In good condition With new rubber-coated top roll () Also suitable for bending non-ferrous metalsEquipment:- Electro-hydraulic 3-roll bending machine- Asymmetrical roll arrangement- Electro-motor-driven side roll adjustment Including digital position display- Manual bottom roll adjustment Via hand crank- Including conical bending device Inclined bottom roll and side rolls Parallel alignment in any side roll position- Hardened rolls SAE 1050 CK 45- Manual folding storage for removing closed pipes Top roll must be raised before opening the storage (e.g., forklift/crane)- Safety device- Connection cable + connector- 4-way foot switch 2 buttons for side roll movement ( ...

sheet width: 1070 mmplate thickness: 4.0 mmpre-bending: 3.0 mmroll length: 1070 mmroll diam. toproll: 110 mmbending speed: 3.0 m/minengine output: 2.2 kWweight: 848 kgrange L-W-H: 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW ()Equipment:- robust electro-mechanical round bending machine- 2x central rollers driven by electric motor (top & bottom roller)- right/left running of the rollers- top roller can be manually swiveled out, with folding bearing- manual delivery of the side roller- including conical bending device- asymmetrical roller arrangement- rollers with profile inlets- safety device (safety line with switch unit)- 1x freely movable control panel- operating instructions (ENG)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

plate thickness: 6.0 mm STthickness at Niro-steel: 4.0 mmplate thickness: 8.0 mm ALUangle adjustable from - to: 30 - 140 Gradtable:: 950 x 890 mmblade length: 220 x 220 mmstroke: 35 H/minwork height max.: 1150 mmtotal power requirement: 3.0 kWweight: 800 kgrange L-W-H: 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=QmUbaV41BfAEquipment:- electro-hydraulic notching machine with adjustable angle 30° – 140°- cutting capacity up to 6.0 mm sheet thickness (R42/mm2)- made of the special spheroidal cast iron GS500.- the cutting movement takes place from top to bottom- robust work table made of steel with conical grooves which ensure optimal adhesion of the stop angles- the scales are embossed- automatic cutting gap adjustment (patented)- system for the automatic adjustment of the gap betwee ...

plate thickness: 4.0 mm STplate thickness: 3.0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4.0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397092The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 4.0 mm: 3.0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3.0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mmFurnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- 2x staking stops with movable and interchangeable stop bars- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left anddirectly connected to a right lower knife- once for each notch over 30°left and once on the right.- the swivel adjustment becomes pneumatic, immediatelyafter completion  ...