lavorazione della lamiera usati in vendita

plate thickness: 4.0 mm STplate thickness: 3.0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4.0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397088The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 3.5 mmdistance between columns: 2100 mmstroke of upper beam: 250 mmadjustment: UW 80.0 mmwork height max.: 920 mmtotal power requirement: 6.0 kWweight: 2910 kgrange L-W-H: 3185 x 875 x 1450 mmFeatures:- Robust electric-driven folding machine- With dynamic, powerful drive motors- Manual/automatic operation selectable- Control panel, right front- Bending angle preselection via electric potentiometer- Manual lower beam adjustment- 1x used upper tool rail- 2x used lower tool rails- 1x freely movable double foot switch- Original operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 8.0 mm STplate thickness: 5.0 mm VAtable-size: 1000 x 950 mmblade length: 200 x 200 mmstrokes per minute: 60 H/minadjustable: Winkel 30°-140° mmwork height max.: ca. 950 mmoil volume: 60.0 lengine output: 4.0 kWweight of the machine ca.: 1200 kgrange L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 eurosFurnishing:- Robust electro-hydraulic notching machine- with adjustable angle, electro-hydraulic adjustment- Adjustment by hand wheels (left + right knife segment)- hardened knives also for cutting stainless steel- front panel- electro-hydraulic knife clamping- Inching mode for setting the shear blades selectable (manual mode)- planed table surface, with T-slots to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- 2x blank holders- 1x free moving footswitch- front scrap switc ...

plate thickness: 4.0 mm STplate thickness: 3.0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4.0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 4.0 mm: 3.0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3.0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mmFurnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- Waste bin- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife- once for each notch over 30° left and once on the right.- the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried ou ...

plate thickness: 4.0 mmthickness at Niro-steel: 3.0 mmblade length: 200 mmangle adjustable from - to: 30 - 120 Gradno. of strokes: 60 Hub/minoil volume: 60.0 ltr.table:: 1000 x 800 mmtotal power requirement: 2.62 kWweight: 800 kgrange L-W-H: 1000 x 1500 x 1440 mmFurnishing:- robust hydraulic notching machine, with adjustable angle- Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels- hydraulic clamping and locking- Infinitely adjustable cutting depth, with digital display- 2x locking accuracy stop, with stop bars- Stripper for sheet metal cutting- Collecting container for clippings- Freely movable foot pedal for triggering the strokeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2520 mmplate thickness: 4.00 mm STthickness at Niro-steel: 2.25 mmbending angle max.: 135 °stroke of upper beam: 250 mmadjustment: 80.0 mmControl: POS voltage: 400 Vtotal power requirement: 6.0 kWweight of the machine ca.: 3720 kgdimensions of the machine ca.: 3685 x 1750 x 1425 mm Original price including accessories approx. 40.000 Euro (!) Special price upon request- in checked conditions - machinevideo : https://www.youtube.com/watch?v=9t1mZUxODGIEquipment:- Robust electric-driven folding machine- With dynamic, powerful drive motors- SCHRÖDER NC control unit POS 400 Bending angle preselection Control panel, right front- Manual backgauge, adjustable from the rear Adjustment range up to max. 750 mm- Manual lower beam adjustment- 1x freely movable double foot switch- 1x set of bending tools- Emergency stop button at the front- Operating instructions (PDF)The data for this  ...

sheet width: 1020 mmplate thickness: 4.0 mmdistance between columns: 1100 mmstroke of upper beam: 250 mmLower beam adjustment: 50.0 back stop - adjustable: max. 750 mmcontrol: POS 400 total power requirement: 4.4 kWweight: 1960 kgrange L-W-H: 2065 x 1500 x 1425 mmEquipment:- Robust electric-driven folding machine- With dynamic, powerful drive motors- SCHRÖDER NC control unit POS 400 Bending angle preselection Control panel, right front- Manual backgauge, adjustable from the rear Adjustment range up to max. 750 mm- Manual lower beam adjustment- 1x freely movable double foot switch- 1x set of bending tools- Emergency stop button at the front- Original operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 160 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 160 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 13800 kgrange L-W-H: 5150 x 2250 x 3000 mm-------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 s ...

diameter of brush: 250 mmwidth of brush: 80 mmturning speed range: 1500 / 3000 U/minvoltage: 380 Volttotal power requirement: 2,0 / 3,0 kWweight of the machine ca.: 175 kgdimensions of the machine ca.: 800 x 400 x 1.300 mmFurnishing:- Deburring handy sheets with notches and contours- Sheet thicknesses up to 6.0 mm are rounded quickly and safely- without forming a secondary ridge- the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush- Simple high speed radial brush rotation- Materials: Steel, stainless steel, aluminium, other non-ferrous metals Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9238987The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6.35 mmthickness at Niro-steel: 4.00 mmcutting angle: 0.5 - 3.0 °cutting gap adjustment: 0.05 - 0.8 mmno. of strokes: 12 - 50 Hub/minback stop - adjustable: 5.0 - 750 mmoil volume: 120 ltr.engine output: 7.5 kWweight: 6400 kg.range L-W-H: 4045 x 1783 x 1750 mm Good condition () According to the previous seller, with very few operating hours From a maintenance workshopEquipment:- Robust electro-hydraulic sheet metal shear Design: Guide rail- LVD control panel centrally located on the front of the machine- Electro-hydraulic cutting angle adjustment- Manual cutting gap adjustment Adjustment from the front - via handwheel Including analog value display- Electro-motor-driven backgauge with recirculating ball screws Continuously variable adjustment range Analog position display Rapid traverse possible- Ball transfer units + recessed grips in the support ta ...

sheet width: 3050 mmplate thickness: 10.0 mmthickness at Niro-steel: 6.0 - 8.0 mmdown holder: 13 Stückdistance between columns: 3070 mmcutting angle: 1.0 - 4.0 °no. of strokes: ~ 22 Hub/minControl: ELGO P8721 oil volume: 240 lvoltage: 400 Vtotal power requirement: 17.0 kWweight: 8000 kgrange L-W-H: 3550 x 2350 x 1900 mm Good / well-maintained condition With special accessories ()Equipment:- NC electro-hydraulic guillotine shear Sliding Guided- Heavy-duty / stable welded construction (machine body)- NC ELGO digital control unit P8721- NC electro-motorized backgauge on recirculating ball screws- Electro-hydraulic cutting angle adjustment Front analog cutting angle display- 1x stable side stop, with T-slot and mm scale- 3x stable support arms, with T-slot and mm scale- Ball transfer units in the work table including recessed grips- Front finger guard - foldable at the front- 1x freely mov ...

sheet width: 1250 mmplate thickness: 1.5 mmroll length: 1270 mmroll diam. toproll: 75.0 mmengine output: 1.5 kWweight: 400 kgrange L-W-H: 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on requestEquipment:- electro-motor-driven 3-roller round bending machine- asymmetrical roller arrangement- 2x driven rollers using a brake motor- manual folding bearing for quick removal of the workpiece- wire insertion grooves on the bottom and rear rollers- double foot switch for R/L running including emergency stop button- rear roller feed with ratchet lever- electrical safety deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdistance between columns: 3100 mmno. of strokes: 18 Hub/mindown holder: 14 Stückoil volume: 150 ltr.cutting angle: 1,2 °control: CYBELEC CybTouchtotal power requirement: 11,0 kWweight: 6300 kgrange L-W-H: 4.000 x 2.100 x 1.640 mm--------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------- Furnishing:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel ...

I-beam section - upend: 120 x 25 (d 1600) mmbar material dia. max.: 140 x 3 (d 3000) mmL-beam: 100x100x10 (d 1600) mmsquare material: 140 x 40 x 3 (d 4000) mmI - beam section - flat steel: 200 x 35 (d 1000) mmbar material - diameter: 70,0 (d 800) mmtool taper: 100,0 mm0: 315 mmturning speeds: 5,4 m/min.total power requirement: 11,0 kWweight: 2.240 kgrange L-W-H: 1500 x 1650 x 2100 mmFurnishing:- electro-hydraulic ring/profile bending machine- Hydraulic lower/side roller adjustment for extra small bending radii- Lower/side roller can be delivered individually- 3x powered rollers- divided roller segments- Digital position display of the bottom/side rollers Display with TouchScree function- hardened tool holder (42CrMo4)- Machine base- 2x hydraulically adjustable side guides- Horizontal and vertical work possible- freely movable control panel- Pressure gauge / pressure indicator for the rol ...

sheet width: 2540 mmplate thickness: 3.25 mmthroat: 100 mmno. of strokes: 60.0 Hub/minback stop - adjustable: 530 mmvoltage: 400 Vengine output: 7.5 kWweight: 2450 kgrange L-W-H: 3600 x 1000 x 1560 mmFurnishing:- robust electric motorized guillotine shears- stable, front support/work table- Front control panel - including emergency stop button- manual back gauge up to approx. 700 mm- adjustable by handwheel, with analogue mm scale display- 1x front side stops- 3x front support arms- manual cutting gap adjustment- Cut/lift confirmation by foot pedal- 1x freely movable foot switch- rear sheet metal slide- User manual (PDF) Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9325320The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdown holder: 14 Stückno. of strokes: max. 15 Hub/mincutting angle: 1°15 work height max.: 770 mmcolumn arm: 350 mmoil volume: 170 ltr.control: ENC 100 oil volume: 170 ltotal power requirement: 15.0 kWweight: 7500 kgrange L-W-H: 3850 x 1950 x 1700 mmEquipment:- NC electro-hydraulic swing beam shear- DURMA ENC 100 digital control unit Operator control, pivoting to the front left- NC electro-motorized backgauge Travel = 1.000 mm (X axis) On recirculating ball screws- Manual quick cutting gap adjustment Via eccentric (right side column)- Machine column with overhang (350 mm)- 1x extra-long side stop, with mm scale- 2x front support arms, with mm scale- Ball transfer units in the front support table- Front hinged finger guard- 1x freely movable foot switch- Rear safety device (protective grid)- 2x emergency stop butto ...

sheet width - max.: 1255 mmplate thickness: 4.0 mm STplate thickness: 2.0 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: ~ 66 Hübe/min.cutting angle: 1.5 °total power requirement: 5.5 kWweight of the machine ca.: 2600 kg.range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition ()Furnishing:- electro-hydraulic guillotine shears- manual backgauge with analogue position display (scale + magnifying glass)- electrical cutting length limitation- manual cutting gap adjustment- 1x extra long side stop- 2x extra long support arms- 1x free moving footswitch- rear sheet metal slide- User manual (PDF) Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9325278The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3.0 mm STcutting angle: 2.0 °stroke max.: 38 p. Min.total power requirement: 5.5 kWweight of the machine ca.: 1690 kgrange L-W-H: 1800 x 1800 x 1250 mm from a maintenance workshop ()Furnishing:- Motorized / electric guillotine shears- manual backgauge, adjustment by hand crank Travel range max. 700 mm with analogue position display (scale) manual adjustment from behind- rear protection- rear sheet metal slide- free-moving footswitchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3.0 mmthickness at Niro-steel: 1.5 mmno. of strokes: 35 Hub/mincutting angle: 2°30 °engine output: 3.0 kWtable height: 810 mmweight of the machine ca.: 1150 kg.range L-W-H: 1300 x 1520 x 1170 mm from a maintenance workshop ()Furnishing:- robust electro-motorized metal sheet shears- manual backgauge- adjustable up to 610 mm, using the handwheel from the back- 1x side stop including mm scale- 2x table sheet metal support arms- Piece counter- freely movable foot switch- rear sheet metal slide- EMERGENCY stop button at the front Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9325126The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmwork height max.: 930 mmno. of strokes: 9 - 17 Hub/mincutting angle: 0.5 - 3.0 °down holder: 18 StückControl: SC 90 engine output: 22.0 kWweight of the machine ca.: 9500 kgrange L-W-H: 4270 x 2200 x 2250 mm Good condition With new NC SC 90 control unit ()Equipment:- Electro-hydraulic / slide-guided guillotine shear- HACO NC control model SC 90 Pre-selected backgauge positioning Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment LCD display Emergency stop switch- NC electro-motorized backgauge, on recirculating ball screws- Hydraulically operated hold-down clamps- Front finger guard- Ball transfer units in the support table Support table with recessed grips- 1x side stop with mm scale- 2x front support arms- 1x freely movable foot switch- Rear sa ...

I-beam section - upend: 100 x 20 (d 2100) mmbar material dia. max.: 100 x 3 (d 3000) mmL-beam: 80x80x8 (d 2000) mmsquare material: 50 x 25 x 2 (d 600) mmI - beam section - flat steel: 120 x 30 (d 600) max.140b mmbar material - diameter: 60.0 (d 1000) mmtool taper: 80.0 mmoil volume: 100 Literturning speeds: 4.2 m/min.weight: 1600 kgrange L-W-H: 1240 x 1375 x 1540 mm Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- electro-hydraulic ring/profile bending machine- hydraulic bottom/side roller adjustment for extra small bending radii- bottom/side roller can be adjusted individually- 3x driven rollers- divided roller segments- digital position display of the bottom/side rollers Display with touchscreen function- hardened tool holder (42CrMo4)- machine base- 2x hydraulically adjustable side guides- horizontal and vertical wo ...

pressure: 50.0 tchamfer lenght: 1275 mmdistance between columns: 1040 mmcolumn arm: 250 mmram stroke speed: 225 mm/secwork speed: 0 - 9.8 mm/secreturn speed: 160 mm/secwork stroke: 215 mmdayligth: 512 mmtable height: 800 mmback stop - adjustable: 600 mmcontrol: DELEM DM 51 operating pressure: max. 300 baroil volume: 150 ltr.voltage: 400 Vengine output: 6.0 kWWeight: 4300 kgrange L-W-H: 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=5L8L2AYv0PU-------------------------- -----------------------------PLACKE electro-hydraulic CNC press brakespecially developed for the production of small partsThe advantages:• Low energy consumption• High operating comfort• Wide range of applications• Fast, robust, low-noise• With CNC control as standard-- ...

sheet width: 3020 mmplate thickness: 4.0 mmOpening width / upper beam: 350 mmAdjustment folding beam: 100 mmadjustment of lower beam: 80.0 mmbending angle max.: 130 °work height max.: 900 mmControl: SIEMENS OP 7 voltage: 400 Vtotal power requirement: 9.5 kWweight: 5400 kgrange L-W-H: 4300 x 2400 x 1780 mmFurnishing:- SIEMENS - PLC control model OP 7 Bending process as a controlled, fully automatic, or semi-automatic workflow can be selected Bending angle adjustment electronically preselectable 0-135 °- electr. / controlled backgauge X = 1000 mm with large sheet metal support surface- heavy welded construction- all drives both. via worm gear- Motorized adjustment of the bending beam- large adjustment range of the cheeks- hydraulic upper tool clamping- Insert / bending tools- Operation manual Special accessories included:- separate split goat foot splint H 170 mm Machine video:- https: ...

sheet width: 1050 mmplate thickness: 3,3 mmpre-bending: 3,0 mmroll length: 1050 mmroll diameter: 90,0 mmmin. dia.: 130,0 mmengine output: 1,1 kWweight: 570 kgrange L-W-H: 1.800 x 800 x 1.130 mmFurnishing:- Robust electro-mechanical bending machine- 2x central rollers driven by an electric motor (top and bottom roller)- Top roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- Lower roller manually adjustable, by hand wheel- asymmetrical roller arrangement- self-braking main motor- Safety device (safety line with switch unit)- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized side roller adjustment- Digital position display for motor-driven adjustable side rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 5.5 mmpre-bending: 5.0 mmroll diam. toproll: 140 mmmin. dia.: 210 mmturning speeds: 5.7 U/minengine output: 2.2 kWweight: 1365 kgrange L-W-H: 2020 x 900 x 1.200 mmFurnishing:- Robust electro-mechanical bending machine- 2x central rollers driven by an electric motor (top and bottom roller)- Top roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- Lower roller manually adjustable, by hand wheel- asymmetrical roller arrangement- self-braking main motor- Safety device (safety line with switch unit)- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized side roller adjustment- Digital position display for motor-driven adjustable side rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=PBV-MDtZnlEEquipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface- CNC controlled axes: Y1 + Y2  ...

pressure: 175 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secreturn speed: 135 mm/secwork speed: 10,0 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 90,0 mmoil volume: 200 ltr.voltage: 400 Volttotal power requirement: 15,0 kWweight: 11.950 kgrange L-W-H: 5100 x 2150 x 2850 mm--------------------------------------------------Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2  ...

sheet width: 1550 mmplate thickness: 1.2 mmroll length: 1550 mmroll diam. toproll: 75.0 mmengine output: 1.5 kWweight: 430 kgrange L-W-H: 2110 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on requestEquipment:- electro-motor-driven 3-roller round bending machine- asymmetrical roller arrangement- 2x driven rollers using a brake motor- manual folding bearing for quick removal of the workpiece- wire insertion grooves on the bottom and rear rollers- double foot switch for R/L running including emergency stop button- rear roller feed with ratchet lever- electrical safety deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mmplate thickness: 6.5 mmpre-bending: 4.5 mmdiameter of upper rolls: 150 mmside roll diameter: 130 mmdiameter of lower rolls: 150 mmdistance: max. OW zu UW 20,0 mmtotal power requirement: 2.2 + 1.5 kWweight of the machine ca.: 2370 kg.range L-W-H: 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use () Special price on requestEquipment:- electro-hydraulic 4-roller round bending machine with driven top roller + bottom roller stable welded construction- Area of application: light to heavy sheet metal processing (steel/aluminum/stainless steel)- electro-hydraulic adjustment of the bottom + side rollers- linear guidance of the side rollers- top roller driven by robust electric motor + planetary gear- freely movable, separate control panel- hardened rollers SAE 1050 (CK 45)- conical bending device- 3x axis digital display for precise roller positions- electro-hydrau ...