presse usati in vendita

pressure: 135 tchamfer lenght: 4050 mmdistance between columns: 3150 mmdayligth: 310 mmpiston stroke: 130 mmthroat: 200 mmajustment speed: 100 mm/secworking feed: 8.0 mm/secreturn speed: 65.0 mm/sectable width: 180 mmtable height: 900 mmControl: ELGO P8822 pressure: 220 bartotal power requirement: 8.5 kWweight: 8700 kgrange L-W-H: 4500 x 1700 x 2640 mm from a maintenance workshop well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=9kFvkLU3gQAEquipment:- simple NC electro-hydraulic press brake- with ELGO digital control unit - model P8822 Positioning of the back stop (X axis) Positioning of the depth adjustment (Y1 + Y2 axis) swiveling control panel, front right- electro-motorized back stop (X axis) with digital ELGO position display 2x manually adjustable stop fingers (R + Z axis)- WILA manual table crowning, with analogue actual value disp ...

pressure: 150 tchamfer lenght: 4100 mmdistance between columns: 3150 mmstroke of upper beam: 200 mmthroat: 250 mmdayligth: 400 mmworking feed: 10.0 mm/secreturn speed: 100 mm/sec: 330 barControl: ATS 550 work height max.: 915 mmtotal power requirement: 15.0 kWweight: 10.400 kgrange L-W-H: 4400 x 1700 x 2750 mm From a maintenance workshop in good condition ()Equipment:- Simple NC-controlled hydraulic press brake- Including ATLANTIC NC control ATS 550 Positioning of the backgauge (X) Positioning of the depth adjustment (Y1 + Y2) Possibility of programming various programs Memory capacity: max. 200 programs - max. 400 sets Pivoting control panel, front left Emergency stop button- NC electro-motorized, continuously variable depth adjustment (Y1 + Y2 axes)- NC electro-motorized backgauge (X axis) 2 manually adjustable stop fingers- Manual table crowning, including analog value display- 1 spli ...

pressure: 70.0 tchamfer lenght: 3050 mmdistance between columns: 2550 mmtable width: 140 mmcolumn arm: 200 mmdayligth: 300 mmpiston stroke: 100 mmajustment speed: 80.0 mm/secworking feed: 7.0 mm/secreturn speed: 88.0 mm/secwork height max.: 755 mmvoltage: 380 Voil volume: 70.0 ltotal power requirement: 5.0 kWweight: 4700 kgrange L-W-H: 3500 x 1300 x 2100 mm Good / well-maintained condition () According to the seller, rarely usedEquipment:- Simple conventional press brake- Manual material/backgauge Adjustment from the front, via hand crank With analog position indicator 2x manually adjustable stop fingers- LVD split upper tools- LVD split 1V lower tools Includes die adapter rail (slot)- 2x front, movable support arms- 1x foot switch/2-hand control- Side guards (hinged doors)- Rear guards (hinged door)- Original operating instructionsThe data for this ad was created with ModulMWS - the sof ...

pressure: 150 tstroke: 300 mmtable surface area: 1070 x 290 mmcolumn travel between the guideways: 1070 mmajustment speed: 9.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 11.0 kWweight of the machine ca.: 1870 kg.range L-W-H: 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon requestFeatures:- Robust electro-hydraulic workshop press with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in. and out bolts, bearings, bushings, and much more.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount- 1 set of V-block prism supports- Pressure gauge for pressure display- Simple manual control with: 1 feed speed 1 working speed 1 retraction speed- Piston c ...

pressure capacity max.: 10.0 tbending capacity - flat iron: ca. 100 x 12 mmstroke: 0 - 150 mmdayligth: ca. 100 mmassembly distance: ca. 200 mmprint area: 0 - 100 kNstroke speed: max. 0.6 m/mintable surface area: 1000 x 600 mmwork height max.: 845 mmoperating pressure: max. 260 barengine output: 1.1 kWweight: 400 kgrange L-W-H: 1100 x 800 x 1000 mmEquipment:- Robust electro-hydraulic horizontal bending machine- Large worktable (1000 x 600 mm)- Hydro-mechanical stroke limiter- Continuously adjustable punch stroke- Side-mounted, one-handed operation- 1x bending tool set Reversible die with 80/50/40 mm opening- Control cabinet - frontThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressione: 7,5 distanza tra le colonne: 335 mmilluminazione: 400 mmforo della tabella: 75 mmtavolo:: 540 x 300 mmpotenza totale richiesta: manuell kWpeso della macchina ca.: 350 kg.gamma L-W-H: 1200 x 1200 x 1750 mmArredamento:- pressa a 2 colonne - grande volantino - bloccaggio meccanico del mandrino nella parte anteriore - vari utensili - base della macchina I dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

pressure: 120 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 155 mmthroat: 350 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 77.0 mm/secControl: ENC 310 work height max.: 878 mmtable width: 104 mmoil volume: 150 ltotal power requirement: 11.0 kWweight: 7260 kgrange L-W-H: 4150 x 2150 x 2600 mm New price ~ €50,000 From a maintenance workshop - good condition ()Equipment:- NC electro-hydraulic press brakes- With DURMA NC control ENC 310 128x64 pixel LCD display, illuminated 30 programs with 20 steps each Manual/semi-automatic/automatic operating mode selectable- Pivoting control panel, front left- NC-controlled axes: Y1 + Y2 + X- NC electro-motorized backgauge (X axis) With 2x manually adjustable stop fingers Including lateral and height adjustment (Z + R axes)- FIESSLER laser safety device at the front- Manual bending table crowning A ...

pressure: 150 tstroke: 300 mmtable surface area: 1070 x 290 mmcolumn travel between the guideways: 1070 mmajustment speed: 9.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 11.0 kWweight of the machine ca.: 2070 kg.range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon requestFurnishing:- Robust electro-hydraulic workshop press, with adjustable cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x delivery speed 1x working speed 1x re ...

pressione: 300 lunghezza smusso: 3050 mmcontrollo: DNC 1200 PS Eco peso della macchina ab.: 17.100 kgvolume dell'olio: 400 lEquipaggiamento:- Interruttore a pedale a 2 mani- 1x ausilio di piegatura (BH1) davanti alla macchina- Porte di sicurezza laterali- Porta di protezione dietro la macchinaI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

pressione: 80 tchamfer lunghezza: 2500 mmcorsa: 200 mmControllo: potenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke: 400 mmquantity of oil: 300 lControl: CYBELEC DNC 1200 PS Eco total power requirement: 15 kWweight of the machine ca.: 10.700 Kgrange L-W-H: 4200x2200x3200 mmEquipment:- Controlled axes: Y1, Y2, X, R, Z1, Z2- SICK” light barrier in front of the machine- Side safety guards- Protective grille behind the machine- foot switch- incl. toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 tchamfer lenght: 4050 mmdistance between columns: 3050 mmcolumn arm: 300 mmajustment speed: 140 mm/secwork speed: 10.0 mm/secreturn speed: 130 mm/secwork stroke: 360 mmdayligth: 340 - 700 mmtable height: 1000 mmtable width: 200 mmoil volume: 300 ltr.operating pressure: max. 295 barair pressure: 4.5 - 6.0 barvoltage: 3x 400 Volttotal power requirement: 15.0 - 27.0 kWweight: 17200 kgrange L-W-H: 5850 x 2550 x 3200 mm good condition () including new CNC control- in checked condition - machine video -https://www.youtube.com/watch?v=Owh6BjvZ4RMEquipment:- electro-hydraulic CNC press brake- with new CYBELEC VisiTouch 19 touch CNC control (conversion) graphic numerical 2D control 19? modern, streamlined touchscreen with glass surface can also be operated with gloves clear, well-arranged menus in the operators language easy operation thanks to the user-friendly HMI large tool and p ...

pressure: 60.0 tchamfer lenght: 2600 mmdistance between columns: 2050 mmcolumn arm: 310 mmworking feed: 10.0 mm/secreturn speed: 61.0 mm/secstroke: 100 - 140 mmdayligth: 450 mmtable height: 860 mmoil volume: 100 ltr.Control: ELGO P8822 operating pressure: max. 200 barNumber of working hours: ca. 2.370 hvoltage: 380 Vtotal power requirement: 5.5 kWweight of the machine ca.: 5000 kg.range L-W-H: 3000 x 1850 x 2050 mm good / well-maintained condition () with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on requestin checked conditions - machine video -https://www.youtube.com/watch?v=PsUeM3O5wAMEquipment:- NC electro-hydraulic press brake- with ELGO NC control unit P8822 Input of target/actual values for back stop Input of target/actual values for depth adjustment ` swiveling operation, front left manual mode selectable- NC controlled axes: Y1 + Y2 + ...

pressure: 80.0 tchamfer lenght: 2550 mmdistance between columns: 2130 mmcolumn arm: 420 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 80.0 mm/secstroke: 200 mmdayligth: 470 mmtable width: 60.0 mmtable height: 910 mmNumber of working hours: ca. 37.102 htotal power requirement: 9.0 KWweight of the machine ca.: 5750 kgrange L-W-H: 3100 x 2180 x 2540 mm very well-maintained condition Machine with only approx. 7.700 operating hours ()Furnishing:- CNC control OPERATEUR for axes X,Y1+Y2,R1+R2,Z1+Z2- CNC-controlled back gauge adjustment (X-axis)- CNC-controlled vertical adjustment of the stop fingers (R-axis)- CNC-controlled adjustment of the stop fingers left-right (Z-axis)- Hand control device on the foot switch for manual movement of the axes- freely movable two-hand control & foot switch- Tool top wedge crowning - type AMADA- various application tools- CE marking- 2x EM ...

pressure: 160 tchamfer lenght: 3550 mmdistance between columns: 3100 mmdayligth: 395 mmstroke of upper beam: 200 mmthroat: 350 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 86.0 mm/secwork height max.: ca. 950 mmtable width: 125 mmControl: CYBELEC DNC 60 oil volume: 150 ltotal power requirement: 15.0 kWweight: 10800 kgrange L-W-H: 4700 x 2100 x 2700 mm New price ~ €80,000 From a maintenance workshop In good condition ()- in checked conditions - machinevideo -https://www.youtube.com/watch?v=L6bUrMv-VOMEquipment:- Electro-hydraulic CNC press brake- With DELEM CNC control - Model DNC60 Pivoting control panel, front right Numerical control unit Tool and program library- CNC-controlled axes: Y1 + Y2 + X + CNC crowning- CNC electro-motorized backgauge (X axis) With 2 manually adjustable stop fingers (R + Z axes)- CNC under-table crowning- FIESSLER front safety device- Up ...

pressure: 80.0 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcolumn arm: 250 mmtable width: 85.0 / 135 mmstroke: ca. 390 mmdayligth: ca. 585 mmajustment speed: 180 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/secwork height max.: 1050 mmNumber of working hours: 32.495 hoil volume: 200 loperating pressure: 320 bartotal power requirement: 11.6 KWweight of the machine ca.: 7300 kgrange L-W-H: 3700 x 2000 x 3000 mm Good/well-maintained condition ()- in checked conditions - machinevideo -https://www.youtube.com/watch?v=IKyUmzB0WTI-------------------------- -----------------------CNC electro-hydraulic press brake with: Increased installation height .. approx. 550 mm Increased cylinder stroke .. approx. 390 mm-------------------------------------------------Features:- Robust electro-hydraulic press brake MADE IN GERMANY ()- CYBELEC CNC control DNC 904 PS-A (SN 0332) Pivo ...

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 310 mmstroke: 200 mmajustment speed: 80.0 mm/secworking feed: 10.0 mm/secreturn speed: 58.0 mm/secdayligth: 385 mmtable width: 240 mmwork height max.: 885 / 1050 mmoil volume: 180 ltr.total power requirement: 15.0 kWweight of the machine ca.: 9850 kg.range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=o_t9BBMsNNsEquipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display- swiveling operation, mou ...

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2600 mmcolumn arm: 410 mmajustment speed: 160 mm/secworking feed: 10.0 mm/secreturn speed: 120 mm/secstroke: 265 mmdayligth: 530 mmtable height: 900 mmoil volume: 200 ltr.control: DNC 880 S Number of working hours: ~ 17.200 htotal power requirement: 15.0 kWweight of the machine ca.: 10250 kg.range L-W-H: 4570 x 2360 x 2900 mm good condition () current new price approx. 80.000 euros special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=dyv7iQXcRt4Equipment:- electro-hydraulic CNC press brake- two synchronized cylinders with HIGH PERFORMANCE hydraulic components- with CYBELEC CNC control - DNC 880S 2D graphic display for display and multiple simulation graphic 2D programming easy handling automatic bending sequence calculation and collision detection large product and tool library aut ...

pressure: 300 tchamfer lenght: 4100 mmdistance between columns: 3710 mmstroke - stepless adjustable: 250 mmcolumn arm: 330 mmdayligth: 500 mmtable height: 940 mmtable width: 250 mmworking feed: 7.0 mm/secreturn speed: 90.0 mm/secControl: konv. operating pressure: max. 305 barvoltage: 380 Vtotal power requirement: 22.5 kWweight: 25200 kgrange L-W-H: 4320 x 2100 x 3500 mm well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=rPOBwTfVReoEquipment:- simple, conventional hydraulic press brake- swiveling control panel, left front- electro-motoric back stop (X axis) adjustment via front control panel (button) with analog position display fine adjustment via handwheel, front- with 3x stop fingers, manually adjustable- electro-motoric depth adjustment (Y1+Y2 axis) with analog position display- 1x split set of 85° deer foot upper tool- 1x MultiV - uni ...

pressure: 20.0 tchamfer lenght: 850 mmdistance between columns: 850 mmback stop - adjustable: 375 + 400 mmstroke of upper beam: 196 mmdayligth: 470 mmajustment speed: 200 mm/sectable height: ca. 900 mmtotal power requirement: 5.0 kWweight of the machine ca.: 2500 kg New price ~ 85.000 euros well-kept / very good condition () with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil- in checked condition - machine video -https://www.youtube.com/watch?v=foxzKIA7vX8Description :High performance, fast travel speeds and the best ergonomicsthis bending machine to a perfect tool in terms of productivity andAccuracy.This allows an unrivaled high productivity in the field of small andmiddle bending parts can be achieved, since even complicated bending sequencesseveral stations can be processed very quickly.A large number of different and universally ...

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 12.0 mm/minreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmtable width: 90.0 mmvoltage: 400 Volttotal power requirement: 15.0 kWweight: 9800 kgrange L-W-H: 4150 x 2150 x 2800 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A-  ...

pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 100 mm/secreturn speed: 75,0 mm/secwork speed: 7,0 mm/minwork stroke: 180 mmdayligth: 415 mmoil volume: 200 ltr.table height: 900 mmvoltage: 400 Voltrange L-W-H: 4450x2050x2650 mmFurnishing:- DELEM - CNC control model DA-58T- controlled axes: Y1 - Y2 and X- FIESSLER AKAS - laser protection in front of the machine- Deer foot upper tool- Universal die block- manual table crowning- Safety device: light barrier behind the machine- 2 front support arms- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- CE mark / declaration of conformity- Operating manual: machine and control- Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80.0 tstroke: 285 mmflat steel: 300 x 25 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 750 x 1425 mmtotal power requirement: 10.0 kWmotor: 400 Volt 50 Hzoil volume: 120 lweight: 1700 kgrange L-W-H: 1500 x 750 x 1800 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tchamfer lenght: 4100 mmdistance between columns: 3550 mmcolumn arm: 510 mmram stroke speed: 110 mm/secwork speed: 8.4 mm/secreturn speed: 130 mm/secwork stroke: 375 mmdayligth: 650 mmtable height: 1000 mmtable width: 240 mmback stop - adjustable: max. 800 mmoil volume: 400 ltr.voltage: 400 Volttotal power requirement: 30.0 kWweight: 26409 kgrange L-W-H: 5450 x 2650 x 3470 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot ...

pressure: 40.0 tstroke: 285 mmflat steel: 250 x 24 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 660 x 1250 mmtotal power requirement: 4.0 kWmotor: 400 Volt 50 Hzoil volume: 40.0 lweight: 800 kgrange L-W-H: 1450 x 800 x 1300 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1200 mmcolumn arm: 200 mmram stroke speed: 60.0 mm/secreturn speed: 80. mm/secwork speed: 60.0 mm/secwork stroke: 100 mmtable height: 760 mmtable width: 150 mmoil volume: 130 ltr.voltage: 400 VoltControl: ESA E21 total power requirement: 4.0 kWweight: 3030 kgrange L-W-H: 2050 x 1800 x 2030 mm Demonstration/demo machine () From our showroom (like new) With very few operating hoursFurnishing:- compact hydraulic press brake- BERNARDO NC control model E21- swiveling control panel- electrical adjustment of the backgauge- Back stop on recirculating ball spindles- electrical adjustment of the immersion depth- Laser protection device in front- Upper deer foot tool - divided- Tool holder with quick change system- Universal die block- side + rear protective device- 2x front support arms- movable double foot switch (operation)The data ...

pressure: 20.0 tstroke: 185 mmflat steel: 200 x 12 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 480 x 1060 mmtotal power requirement: 2.2 kWmotor: 400 Volt 50 Hzoil volume: 12.0 ltr.weight: 530 kgrange L-W-H: 1150 x 480 x 1400 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3050 mmdistance between columns: 2550 mmajustment speed: 90.0 mm/secworking feed: 10.0 mm/secreturn speed: 75.0 mm/secstroke: 140 mmdayligth: 375 mmcolumn arm: 250 mmtable width: 90.0 mmwork height max.: ca. 950 mmNumber of working hours: 14.100 htotal power requirement: 13.5 kWweight: 8500 kgrange L-W-H: 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours ()Equipment:- CNC electro-hydraulic press brake- DELEM CNC control - model DA 58 Swiveling control panel, front left 2D graphic programming & product display Tool & program library- CNC-controlled axes: Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning- CNC electro-motorized backgauge (X axes) Stop system with 2x CNC-controlled gantries- CNC electro-motorized height adjustment of the backgauge (R axes)- CNC electro-motorized adjustment of  ...

pressure: 100 tstroke: 300 mmtable surface area: 1070 x 260 mmcolumn travel between the guideways: 1070 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lengine output: 5.5 kWweight of the machine ca.: 1500 kg.dimensions of the machine ca.: 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon requestFurnishing:- Robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x deliver ...

pressure: 125 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 120 mmajustment speed: 70.0 mm/secworking feed: 7.0 mm/secreturn speed: 60.0 mm/secdayligth: 325 mmtable width: 180 mmwork height max.: 915 mmoil volume: 150 ltr.total power requirement: 12.5 kWweight of the machine ca.: 9100 kg.range L-W-H: 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop ()Equipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electro-motor-driven back stop, with ball screws (X axis) with 2x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) with digital position display- swiveling operation, left-hand side- split deer foot + pointing tool- 1x rotatable Multi V univers ...