torni usati in vendita (3,114)

diametro di rotazione: - mmLunghezza di rotazione: - mmcontrol: Potere totale richiesto: kWpeso della macchina ca.: tDimensioni della macchina ca.: mI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 500 mmturning length: 1200 mmcontrol: Siemens 840D greates pass round over bed: 700 mmMain spindle:: turning speed range - main spindle: 20 - 5000 min/-1power capacity - main spindel: 25 /34 kWC-Axis: 0,0001 °spindle diameter: 65 mmmilling spindle: milling spindle motor: 23 / 13 kWmilling head speed: 12000 U/minb-axis: +/- 120 °axis stroke:: x-axis: 490 mmy-axis: +/- 100 mmz-axis: 1300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/minfeed power: 5,6 / 5,6 / 7,4 kNnumber of toolpositions: 24 pos.tool taper: HSK A 63 total power requirement: - kWweight of the machine ca.: 15 tdimensions of the machine ca.: 6 x 3 x 2,3 mCNC turning and milling center - 5 axes simultaneous- CNC control Siemens 840D Ergo Line with ShopTurn- C-axis (0.0001°)- Milling head with B-axis- Y-axis- Coolant device/paper belt filter (through Spindle)- Chip conveyor- Tailstock- SMW A ...

Diametro di tornazione: 16 mm passaggio del perno: 16 mm Lunghezza di rotazione: 160 mm Controllo: GE FANUC Serie 18 I-T Intervallo di rotazione del perno: 8000 U/minrapid rotazione: 30 m/min Potenza totale richiesta: 2,2 kWweight della macchina ca.: 2,1 t Accessori: caricatore a barre IEMCA, GENIUS 226-32 L, YOM 2002 (per barra diametro 2 - 26 mm e lunghezze della barra 1500 - 3210 mm), Chip conveyor, refrigerante I dati per questo spot sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

faceplate diameter: 6300 mmswing diameter: 9700 mmturning height: 4900 mmram head dimension: 360 x 360 mmfaceplate turning speed range: 0,4 - 50 U/minworkpiece weight: 150 tmain drive motor: 71 kWControl: Siemens Sinumerik 840D total power requirement: 230 kVAweight of the machine ca.: - tdimensions of the machine ca.: - m2010 overhauled and modernised, new electric etc, equipped with:- Siemens Sinumerik 840D (2 Panels Left/right Side)- C-axis and milling spindle- 2 ram support on cross beam- milling spindle with 1000 rpm, 28kW (right ram)- Turning support (left ram)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter max. over bed cover: 570 mmswing diameter over face slide: 420 mmcontrol: Heidenhain CNC PILOT longitudinal stroke: 635 mmface stroke: 220 spindle bore: 79 mmcentre distance: 1000 mmchucking diameter: 250 mmtailstock taper MT: 4 feed speed longitudal: 0,025-24.000 mm/min.feed speed face: 0,025-20.000 mm/min.power feed longitudinal: 7.000 NFeed Force Face: 3.500 Ntotal power requirement: 44 weight of the machine ca.: 5,7 tdimensions of the machine ca.: 7,5 x 4,0 x 1,7 mAccessories: - 3 clamping jaws - various tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC Series 31i Model 5 turning diameter: 540 mmturning length: 1040 mmc-axis: indexing: 0.001 °turning speeds: -5000 U/mintool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mmrapid traverse X-axis: 36 / 24 m/minrapid traverse Z-axis: 36 / 26 m/minOverall size: 8000 x 3000 x 3000 mmweight of the machine ca.: 12000 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Asse C completo 360.000 - Utensili azionati Axiaal e Radiale - Calcio trasformato - Supporto stabile C-Type - Mandrino anteriore con alesaggio 180 - Mandrino posteriore con alesaggio 180 - Larghezza del cassone a 3 canali guida 750 mm

POREBA TCF 160 is a heavy-duty CNC horizontal lathe (turning machine) manufactured by POREBA Machine Tools, a Polish industrial machine tool builder. It’s part of the TCF series, which includes several sizes designed for machining very large, heavy workpieces such as shafts, rolls, and other long cylindrical components.Turning large shafts and heavy cylindrical parts, like those used in shipbuilding, power generation, mining, and heavy machinery.When equipped with optional tooling, it can also perform drilling and milling operations in addition to turning.Rigid construction with hardened guideways and heavy cast components for stability.Milling attachment 5,5 kW with Sk-40 taperCentral lubricationMotorized tailstock4 Chuck 1300 mm CNC control SIEMENS 840D with following softeare options:MMC Easy MaskSpline interpolationLook AheadContour re-alignmentMantel surface programmingFull C-A ...

turning diameter: 450 mmturning length: 380 mmcontrol: Seicos 40L Multi max. machining diameter: 340 mmBar feed: 51 mmturning speed range - spindle: 30 ~ 5.000 U/mindrive capacity - spindle motor: 11 / 7,5 kWspindle nose: A2-6 spindle bore: 59 mmbearing diameter: 100 mmtravel -x axis: 215 mmtravel -z axis: 400 mmturret (x-stations): 16 feed: 0,001 ~ 500 mm/minrapid traverse: X/Z: 30 m/minShank diameter: 25 x 25 mmDrill shank diameter: 40 mmtail stock: taper of center: MK 5 tailstock adjustment: 300 mmtotal power requirement: 23 kVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 5,5 x 2,8 x 2,2 mDocuments: Chip conveyor: Tailstock: Signal-Light: Parts removal: tool setter: work light: tool holders: (Revolver / Turret) CNC LatheHITACHI SEIKI - HiTec-Turn HT 20 RIIIThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 640 mmswing diameter over face slide: 435 mmcontrol: Siemens SINUMERIK 810D pl turning speed range: 3 - 2.500 U/mincentre distance: 1.500 mmspindle bore: 70 mmspindle diameter in front bearing: 100 mmLathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 tiThe machine is in good condition and can be inspected under power at any time.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DUS630ti | DUS 630ti | DUS 630 tiThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 480 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: - mmturning speeds: 90 - 1120 U/mincentre height: 240 mmspindle bore: 52 mmtotal power requirement: 7,5 KWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 3,0 x 1,3 x 1,5 mEngine Lathe- 3-jaw chuck (200 mm)- Quick-change tool post- Steady rest- Machine lamp- Chip tray- Center pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di rotazione: 465 mm, lunghezza di rotazione: 1050 mm: Heidenhain asse x: 300 mm, consumo totale di potenza: kWpeso della macchina: ca.: 7600 kgDimensioni della macchina ca.: mI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

diametro di rotazione: 100 mm lunghezza di rotazione: 75 mm) controllo: FANUC Oi-TF fabbisogno totale di potenza: 15 kWweight della macchina ca.: tdimensioni della macchina ca.: mI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter over bed: 1600 mmturning diameter over slide rest: 1280 mmturning length: 5000 mmcentre height: 800 mmspindle turning speed range: 1 - 200 U/minspindle bore: 105 mmspindle diameter in front bearing: 120 mmmain drive motor: 75 kWmax. workpiece weight between centres: 30000 kgworkpiece weight in steadies max.: 40000 kgbed slide rapid adjustment: 4000 mm/min.total power requirement: ca. 100 kWweight of the machine ca.: 52 tRefurbished in 2020 and equipped with:- 4-jaw faceplate Ø 1600- thread cutting- 4-fold heavy duty tool holder- Hardened tracks- tailstockdiffenret Steadies, chip conveyor and other accessories, available upon requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 256 mmturning length: 530 mmcontrol: Fanuc 31i-A turning diameter over bed: 550 mmturning diameter over cross slideways: 350 mmmain spindle:: max. turning speeds: 6000 min/-1Drive power - main spindle: 11 kWmax. torque: Nmmax. rod diameter: 45 mmspindle head: A2-5 chucking diameter: mmtool turret:: shaft height for square tool: 25 mmDrill shank diameter: 50 mmtravel:: x-axis: 210 mmz-axis: 560 mmfeeds:: rapid traverse: x 20 / z 24 m/mintotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 mTechnical Specifications:- Manufactured in 2017 but not put into operation until 2021- Fanuc 31i mod A CNC control- Y-axis- 20 bar tool cooling- Fedek bar loader- Chip conveyor- 12-station tool turret- 10 rotating toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lunghezza di rotazione: 1500 mm. Passaggi di grande giro sul letto: 490 mm. Diametro di rotazione sul carrello frontale: 280 mm: Corrente manuale Heidenhain Gamma di velocità - fino a: 3000 U/minuto diametro: 65 mm Cilindrata: 65 mm Potenza - Potenza del pezzo: 12/16 (100/60%) kWweight della macchina ca.: 3,5 tAttrezzature/Accessori: - Supporto stabile - Mandrino - Portautensili - Punte - Portautensili - Punte - Porta-punti Multifix I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter over bed: 500 mmturning diameter over slide rest: 330 mmturning diameter in the gap: 600 mmturning length: 3000 mmbed width: 505 mmspindle bore: 72 mmspindle head: DIN 55022 Gr. 8taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/minpower requirement: 18,5 kWdimensions: 5,3 x 1,75 x 1,53 mweight of the machine ca.: 5,2 tused lathe in nice condition with digital scale- 2 axis digital scale- 4 jaw chuck Ø 250 mm- 3 jaw chuck Ø 260 mm- Multifix C toolholder system- some toolholders- steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 390 mmturning diameter over slide rest: 190 mmturning length: 1000 mmturning dia. in gap: 460 mmspindle head: DIN 55026 Gr. 6spindle bore: 52 mmturning speed range: 11,2 - 2240 U/minpower requirement: 7,5 kWbed width: 355 mmdimensions: 2,8 x 1,3 x 1,6 mweight of the machine ca.: 1,9 tEquipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 400 mmcentre distance: 3.000 mmmax. swing over bed: 810 mmmax. swing over facing slide: 510 mmmax. swing-dia. in gap: 850 mmcontrol: WEILER max. workpiece weight: 3.800 kgspindle diameter in front bearing: 150 mmspindle bore: 106 mmfaceplate diameter: 630 mmworktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mmspindle turning speed - stepless: 1 - 1.800 U/minLathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor.A comprehensive tool package is included in the scope of delivery.The machine video from the production plant will be shared on request.The machine is in good condition and can be inspected under power at any time.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - ...

turning diameter: 430 mmturning length: 1500 mmcontrol: OSP P300 turning diameter over bed: 670 mmturning dia. over face-slide: 480 mmWorkingspindle:: power capacity - main spindel: 30/22 kWturning speed range - main spindle: 0 - 3000 U/minmax. bar capacity: 95 mmspindle head: 11 JIS A-2 / ASA travel -z axis: 1500 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 30 m/mintravel -x axis: 270 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 25 m/minC-Axis: 0,001 °Rapids C - Axes: 200 min -1rapid traverse: 12 m/mintravel -y axis: 120 mmtotal power requirement: 29 kVAweight of the machine ca.: 8,6 tdimensions of the machine ca.: 4,3 x 2,25 mCCNC turning and milling centerequipped with:- CNC control OKUMA OSP P300- 12-fold Tool Revolver for driven tools- Tailstock- Chip conveyor- self-centering Chuck 315 mm Autoblock- 2 motorized radial modules- 2 axial modules for thermal expans ...

turning diameter over bed: mmturning diameter over slide rest: mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mmy-travel: 210 mmz-travel: 1150 + 100 mmcontrol: Fanuc MSX-701III Maximum turning diameter: 660 mmMax. turning length: 1498 mmDiameter over cross slide max.: 400 mmnumber of spindle speeds: 3000 U/mintool piece magazine with: 40 Plätzenturret: 10 Fachtotal power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mmturning length: 760 mmcontrol: Fanuc x-axis: 260 mmz-axis: 830 mmtotal power requirement: kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornazione: 430 mm, lunghezza di rotazione: 519-525 mm: Mori seiki MSX-805 asse x: 230 mmz: 520 mm, potenza totale richiesta: kWweight della macchina ca.: 4100 kgdimensioni della macchina ca.: mI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

: 0560 mm: 390 mm: 2000 mm: 280 mm: 80 mm: 11,25 kWspindle turning speed - stepless: 20-2000 U/minspindle taper: K 8 DIN 55027 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mmturning length: 760 mmcontrol: FANUC I-Series Plus greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 4000 U/minspindle drive motor: 22 / 15 kWspindle nose: ASA A2-8 spindle bore: 81 mmbar material dia.: 76 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 12 St.travel -x axis: 260 (72 + 188 ) mmtravel -z axis: 830 mmtravel -y axis: 105 (+/- 52,5) mmdiameter of quill: 100 mmquill stroke: 100 mmtailstock taper MT: MT 5 total power requirement: 41,98 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 4,0 x 2,5 x 2,2 mCNC control FFANUC I-Series Plus- chip conveyor- driventools 5000U/min, 7,5kW- C-axis- hydraulic unit- tailstock- coolant 7 bar- bar loader interfaceCapto C3 straight chair: 2Capto C3 90° chair: 1ER20 Capto chuck: 10ER32 Capto chuck: 4Weldon-to-Capt ...

turning diameter over bed: 3750 mmturning diameter over slide rest: 3250 mmturning length: 15000 mmcentre distance: 15000 mmfaceplate: 3000 mmworkpiece weight: 120 tsteady: + 15t Rest: 2 main drive: 119 kWspindle bore: 105 mmspindle turning speed range: 0,33 - 75 U/minfeed in x - axis: 300 mm/minfeed in y - axis: 150 mm/mintailstock quill diameter: 500 mmtotal power requirement: ca 140 kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 2-Carriages- Face Plate 3000mm- 6-Steady Rests- 4-Way Bed Construction- Taper Attachment- Inch/Metric Threading- Tailstock With Live CenterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.