fresatrici usati in vendita (2,493)

x-travel: 300 mmy-travel: 300 mmz-travel: 400 mmControl: Contour 3 / Dialog 4 total power requirement: 5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mNo. 5268:Universal tool milling machineMake DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unitWorking area: 300 x 300 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2500 mmy-travel: 1300 mmz-travel: 900 mmControl: Heidenhain iTNC 530 table surface area: 2500 x 800 mmtable load: 5,0 ttool taper: SK 50 DIN69871spindle turning speed range: 36 - 4000 U/minfeed range: 2 - 12000 mm/minmain drive: 25 kWtotal power requirement: 50 kWweight of the machine ca.: 17 tdimensions of the machine ca.: 8,4 x 4,5x 3,8(3,9) mThe main engine was overhauled in September 2022 for € 6,000.The machine was partially overhauled in 2007Scope of overhaul:Feed motors were overhauledNew Heidenhain iTNC 530 control system with newmain spindle drive (Siemens)Retention of the control cabinet and feed drivesGeometric overhaul of the machineOverhaul of the tool changerDefective guideway covers were repaired or replacedThe milling head was completely overhauled approx. 3 years ago.Equipment:CNC control Heidenhain iTNC 530Horizontal/vertical swivelling milling headSeparate  ...

x-travel: 580 mmy-travel: 380 mmz-travel: 360 mmtotal power requirement: 6 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,800x2,130x1,980 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 400 mmz-travel: 500 mmControl: LINUX CNC total power requirement: 9 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3 x 3 x 2,7 m2025 RETROFIT mit LINUX CNC - PC Steuerung Fixed tableFull protection cabinElectronic handwheelDocumentationSpindle holder SK 40 / DIN 2080Speed range up to 6300 min-1Rapid traverse 10 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mmy-travel: 600 mmz-travel: 455 mmControl: Dialog 4 turning speeds: 6300 U/mintool taper: SK40 quill stroke: 80 mmtable-size: 550 x 1000 mmtable load: 0,6 tweight of the machine ca.: 4 tX-axis travel: 710 mmY-axis travel: 600 mmZ-axis travel: 455 mmControl system: Dialog 4Spindle speed: 6,300 rpmTool holder: SK 40Quill stroke: 80 mmTable size: 550 × 1,000 mmTable load capacity: 600 kgMachine weight: approx. 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 300 mmz-travel: 350 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 222 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mmy-travel: 2500 mmz-travel: 1150 mmcontrol: 840 D Powerline tool taper: HSK-A63 table-size: 3000 x 2500 mmturning speeds: 16000 U/mintotal power requirement: 60 kW- 5-Axis-Fräsmachine- max. rpm: 16.000- X-Way: 3000 mm- Y-Weg: 2500 mm- Z-Way: 1150 mm- A-Axis: +/- : 100 mm- C-Axis: +/- : 181,5 mm- Tabelsize: 3000 mm x 2500 mm- option: Blowing air outside- kinematics: ClevisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.600 mmy-travel: 700 mmz-travel: 700 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 18.000 min/-1power capacity - main spindel: 35 / 25 kWtool taper: SK 40 work table:: table surface area: 2.900 x 700 mmmax. table load: 2.150 kgtool magazin:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 40 m/minfeed speeds: max. 40.000 mm/minfeed power: max. 8 kNtotal power requirement: 54 kVAweight of the machine ca.: 14,4 tdimensions of the machine ca.: 8,0 x 5,6 x 2,8 mChip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setting: Blum - LaserCo ...

x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmfeed power: 160 kpspeed: 20 - 200 mm/minrapid traverse: 1200 mm/mintotal power requirement: 1,4 kWweight of the machine ca.: 0,45 tX-axis travel: 300 mmY-axis travel: 200 mmZ-axis travel: 350 mmFeed force: 160 kpFeed speed: 20 – 200 mm/minRapid traverse: 1,200 mm/minTotal power requirement: 1.4 kWMachine weight: approx. 0.45 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mmy-travel: 500 mmz-travel: 400 mmControl: TNC 360 spindle speed:: 40-4.000 U / mintotal power requirement: 7,5 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: 2,6 x 1,8 x 2,2 mX-axis travel: 560 mmY-axis travel: 500 mmZ-axis travel: 400 mmControl system: Heidenhain TNC 360Spindle speed range: 40 – 4,000 rpmTotal power requirement: 7.5 kWMachine weight: approx. 2.6 tSpace requirement (L × W × H): approx. 2.6 × 1.8 × 2.2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1500 mmy-travel: 1500 / 1000 mmz-travel: 975 mmControl: Fidia total power requirement: 20 kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: 5 x 6 x 4 mNo. 30875-axis milling machine BOHNER & KÖHLE VH 2 / 10 KWorking area: 1500 x 1500 (1000) x 975Drive: 14 kWControl: Control Fidia V 7.2Table 2500 x 1000 mm16-fold tool changer KelchSpindle holder SK 50Spindle speeds 40-5600 min-1Projection of milling spindle 1030 mmWeight 12500 kgGewicht 12500 kg13,5 LademeterGrößte Transportbreite 3 mGrößte Transporthöhe 3,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 300 mmz-travel: 400 mmControl: Contour - 3 / Dialog 4 total power requirement: 5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mNo. 5267:Universal tool milling machinesMake DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unitWorking area: 300 x 300 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 350 mmz-travel: 500 mmtotal power requirement: 3 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mNo. 3701Vertical console milling machineHESSAPP HC 50 etWorking area: 600 x 350 x 500Drive: 2,3Control: Heidenhain TNC 135 / IndramatTable surface 1180 x 330 mmSpeed range 70 - 6000 rpmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: - mmy-travel: - mmz-travel: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 430 mmz-travel: 400 mmtotal power requirement: 4 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 3999Universal tool milling machineHERMLE UWF 801Working area: 500 x 430 x 400Drive: 3Control: Heidenhain TNC 135Fixed table 800 x 390 mmchip traydocumentationSpindle SK 40Speed range 50 - 2500 min-1Space requirement approx. 3 x 3 x 2 mWeight approx. 1400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 10.100 (2x 5.000) mmy-axis: 3.000 mmz-axis: 1.500 mmControl: Sinumerik 840 D Siemensdistance between columns: max. 3.000 mmpassage: max. 1.950 mmdistance spindle center to table: max. 1.800 mmdistance spindle nose and table: 1.350 / 1.500 mmMain spindle:: type: P 8005020/00-4 turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 20 kWmax. Torque: 48 Nmtool taper: HSK-A63 DIN 69063Spindle Extension: 450 mmswivellable: B: +110° / -10 °rotatable: C: +/- 200 °Main spindle:: type: P 8002320/00-4 turning speed range - main spindle: 20 - 5.000 min/-1power capacity - main spindel: 40 kWmax. Torque: 1.100 Nmtool taper: HSK-A100 DIN 69063Spindle Extension: 300 mmswivellable: B: +110° / -10 °rotatable: C: +/- 200 °work table:: table surface area: 4.000 x 2.200 (2x) mmmax. table load: 12 / 20 theight over floor: 700 mmnumber of T-slots: 11 + 19 T-slot  ...

x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmControl: Heidenhain TNC 410M table surface area: 800 x 400 mmtool taper: ISO 40 spindle turning speed - stepless: 50 - 4000 U/minmain drive motor: 5,5 kWtotal power requirement: kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: m CNC control HEIDENHAIN TNC 410M Coolant equipment Machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.: 720 kgdimensions: 1200 x 950 x 1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mmy-travel: 500 mmz-travel: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,2 mNo. 4614Mikron WF 31 SAUniversal tool milling machineWorking area: 560 x 500 x 400Control: Heidenhain TNC 114 - active digital displayRigid angular tableSpindle holder SK 40Coolant deviceSpeed range 40 - 4000 rpmWeight approx. 2450 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 360 mmz-travel: 400 mmspindle taper ISO: 40 ISOtable:: 1370 x 320 mmfeed:: H 80 - 830 / V 23-625 mm/min.turning speeds: H 35 - 1500 / V 45 - 1660 U/mindistance spindle /table: H 30 - 430 / V 210-610 mmrapid traverse: Z Achse 750 mm/minthroat: 305 - 805 mmT-slots: 3 x 14.0 mmtable - swivable +/-: -45 / +45 °workpiece weight: max. 300 kgcoolant pump: 25.0 L/min.total power requirement: 7.6 kWweight of the machine ca.: 1540 kgrange L-W-H: 1840 x 1830 x 2050 mm- Large rectangular guide in y and z axes- ensure increased stability- 8x automatic feeds and rapid traverse in all axes- driven by servo motor- Universal milling head system Huron, adjustable to all angular positions- Swiveling control panel with ergonomically placed switches- Heavy machine stand made of gray cast iron for vibration-free work- Very smooth running thanks to ground gears running in an oil bat ...

x-travel: 1190 mmy-travel: 530 mmz-travel: 540 mmtable-size: 1600 x 400 mmspindle drive: 11 kWtool taper: ISO 50 turning speeds: 28-1400 U/minfeeds: 16-800 mm/Utotal power requirement: 21 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: mX-axis travel: 1,190 mmY-axis travel: 530 mmZ-axis travel: 540 mmTable size: 1,600 × 400 mmSpindle motor: 11 kWTool holder: ISO 50Spindle speed range: 28 – 1,400 rpmFeed rate: 16 – 800 mm/minTotal power requirement: 21 kWMachine weight: approx. 4.8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2003 : 4544 : prompt, Zwischenverkauf v : Spanien : 13800 €: 1 : 50 - 1700 (12) U/min: ISO 40 : 600/210/400 mm: 800 x 225 mm: 1500 mm: 1350 mm: 1850 mm: 950 kg: 1,5 kWwith 3-axis digital display Fabr.FagorCooling equipmentMachine lampSwivelling universal milling head (Huron design)Horizontal milling device with counter bearingTable enclosureautomatic feeds in X and YMachine feetsUser Manual and EG Confirmation englishBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-maschinen.com/en/lp/used-machinesThe data for this ...

x-travel: ca. 900 mmy-travel: ca. 280 mmz-travel: ca. 400 mmtotal power requirement: 5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,52,52,5 mNo. 5100:1 used vertical milling machineFRITZ WERNER, type FV 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mmy-travel: 4000 mmz-travel: 1500 mmControl: Heidenhain TNC 430 M total power requirement: 120 kVAweight of the machine ca.: 83,2 tdimensions of the machine ca.: m3/5 axes CNC portal milling machine with integrated C-axisand changeable milling heads.The machine had a purchase price of € 1.4 million in 2002.An inspection in the sellers plant under power is possible afterprevious appointment.Condition:The machine was overhauled in 2018, costs of over € 100.000,-.- Drives of the X-axis renewed- New hydraulic power unit- Complete electrical wiring renewed- Spindle cooling unit new- 2 pieces longitudinal conveyors new- Coolant pump new- Cover complete X-axis new- Bellows Y-axis new- Exchange measuring ruler X-axis- Fork head spindle bearing newBelleville spring assembly newDrive motor A-axis newSpindle cone ground- Overhaul milling gear (2020)Working rangeTravelsX-axis 300 ...

x-travel: 4700 mmy-travel: 1000 mmz-travel: 1000 mmcontrol: HEIDENHAIN TNC355 table-size: 5000x1000 mmT-slots: 7x mmturning speed range: 2800 U/minfeed: 6-5000 mm/minrapid traverse: 15000 mm/minspindle motor: 30,00 kWspindle taper: SK 50 Table load: 10.000 kgMain drive: 40 PSweight of the machine ca.: 27,00 tdimensions of the machine ca.: mWith HEIDENHAIN TNC 355 control.Machine can be inspected under power.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 300 mmz-travel: 400 mmControl: Dialog / Contour 3 total power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 232 mPackage price: 3 x DECKEL FP 2 EXW free lorryStock no:5267 FP 2 A Contour 35268 FP 2 A Contour 35290 FP 2 NC Dialogue 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mmy-travel: 270 mmz-travel: 355 mmtool taper: ISO 50 speeds of spindle (left/right): 25-1400 total power requirement: 3,8 kWweight of the machine ca.: 2 tdimensions of the machine ca.: mX-axis travel: 850 mmY-axis travel: 270 mmZ-axis travel: 355 mmTool holder: ISO 50Spindle speed (clockwise / counter-clockwise, infinitely variable): 25 – 1,400 rpmTotal power requirement: 3.8 kWMachine weight: approx. 2 tInfinitely variable feed rates on all axes (X, Y and Z)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.: 1.700 kgdimensions: 2000 x 1000 x 1950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mmy-travel: 800 mmz-travel: 800 mmControl: CNC 432 total power requirement: 22 kWweight of the machine ca.: 17 tdimensions of the machine ca.: 5 x 3,70 x 3 mNr. 2754 Universal bed milling machine MAHO MH 1600 SSpindle SK-50,Speed range up to 4000 min-1Max. workpiece weight 3000kg35,000 switch-on hours,10,0 0spindle hours,Dimensions 5 x 3.70 x 3 m,Weight 16 tonnes.Automatic swivelling milling head,Fixed table 1800 x 980 mm,36-fold universal tool changer,Internal coolant supply with paper belt filter,chip conveyor, manual control bar.Working area: 1600 x 800 x 800Drive: 22 kWControl: Philips CNC 432The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 4 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 222 m1 x UWF 700 Digi3 x UWF 801 TNC 135 + 1241 x UWF 802 MFrom stock liquidation, partly not functional / in need of repairPrice VHS / against bidThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.