fresatrici usati in vendita (2,494)

x-travel: 700 mmy-travel: 370 mmz-travel: 350 mmtotal power requirement: 5,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mVertical milling machineSpindle ISO-40, Speed range 48-2100 1/min,feeds 10-1000 mm/min, rapid traverseSpace requirement approx. 2.5 x 2.5 m, Weight approx. 2.5 tonnes.Active digital readout Heidenhain TNC-114Table clamping surface 1000 x 400 mm,Coolant device.Working area: 700 x 370 x 350Drive: 4/5.5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mmy-travel: 920 mmz-travel: 900 mmtable surface area: 2200 x 750 mmtable load: 3 tnumber of T-slots: 6 T - slots - width: 18 mmT - slots distance: 120 mmspindle taper: ISO 50 DIN 69871-B spindle speed max.: 3000 U/mintransmission ratio: 1 speeds infinitely variable range 1: 60 - 3000 U/minweight of the machine ca.: 21,6 tfeeds longditudinal/cross/vertical: 0 - 5000 mm/minrapid traverse: 15000 mm/mintotal power requirement: 38 kwweight of the machine ca.: 11 tPull studs DIN69872-B | IKZHours:Control on: 43036 hMachine on: 41311 hProgram run 13894 hThe machine is already dismantled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-48474-35

x-travel: 1200 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 3 x 2 x 2 mNo. 4427Universal tool milling machine DECKEL FP 4 L / 2707Working area: 1200 x 400Fixed angle tableControl: 3-axis digital displayWeight approx. 3.5 tonsSpace requirement 3 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mmy-travel: 500 mmz-travel: 400 mmcontrol: Heidenhain TNC 114 Aktiv turning speed range: 40 - 4000 U/minspindle drive, 2-steps: 3,3 / 4 kWtotal power requirement: 9 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,3 x 2,3 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 500 mmz-travel: 500 mmControl: CNC 432 total power requirement: 10 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 3 x 3 x 2,6 mNo. 0052Universal tool milling machine MAHO MH 700 CWorking area: 700 x 500 x 450Drive: 10 kWControl: Philips CNC-432Fixed tableFully protected cabin with 3 sliding doorsTool holder: ISO-40.Speeds: 20-3150 min-1Feed rate: 1-3000 mm/min,rapid traverse 6 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 560 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 3 x 3 x 2,2 mNo. 0104Universal copy milling machineDECKEL KF 3 Sbuilt in 1979 with divided coordinate tableWorking area: 700 x 560 x 450 mmDrive power: 3 kWAccessories:Divided coordinate tableFinishing spindleLocking armControl handle with cableStylus holderColletsSpace requirement 3 m x 3mWeight approx. 2,380 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmx-travel: 500 mmy-travel: 260 mmcross-moving table: 880x320mm spindle turning speed - stepless: 100-9000 U/mincontrol: HEIDENHAIN TNC310 vertical movement: 480 mmquill stroke: 160 mmweight of the machine ca.: 2.2 tMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mmy-travel: 500 mmz-travel: 450 mmtable-size: 1250x500 mmspindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/minweight of the machine ca.: 5.2 tHEIDENHAIN TNC-355Misc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.200 mmy-travel: 560 mmz-travel: 720 mmcontrol: iTNC 530 Heidenhainturning speed range - milling: 20 ~ 12.000 U/minpower capacity - milling spindle: 35 / 25 kWtool taper: SK 40 tool piece magazine with: 100 pos.table surface area: 2.600 x 600 mmrapid traverse X-axis: 100 m/minrapid traverse Y-axis: 50 m/minrapid traverse Z-axis: 50 m/minmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgmax. table load: 2.200 kgtotal power requirement: kWweight of the machine ca.: 12 tdimensions of the machine ca.: 7,0 x 4,2 x 2,7 mChip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mmSeperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 barTravelling column milling machineDECKEL MAHO - DMF 220 Linear- new spindle installed (April 2024)- incl. 4th Axis 560mm and  ...

x-travel: 1200 mmy-travel: 350 mmz-travel: 350 mmtable-size: 1800x405 mmspindle taper ISO: 50 spindle turning speed range: 30-1800 U/minweight of the machine ca.: 4.4 tMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2 x 3 x 3 mNo. 1859Universal tool milling machine MAHO MH 800Working area: 700 x 450 x 450Universal built-in rotary table 1050 x 627 mm,quill feed gear 0.02-0.2 mm/revSpindle ISO-40,Speed range 32-1600 1/min,feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min.Cross table movement by hand 225 mm,Table top rotation 360°Table swivels/tiltable +- 30° each.Space requirement approx. 2 x 3 x 3 m,Weight approx. 3.3 tons.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 250 mmz-travel: 400 mmtool taper: ISO 40 spindle turning speed range: 30-6300 / 20-4200 U/minfeeds: 0 - 10.000 mm/minquill stroke: 90.0 mmtable-size: 600 x 320 mmT-slots: 5 x 14 x 63 mmControl: TNC 410 CA spindle: ein ~ 126 Std.engine output: 11.0 kWweight: 1300 kgdimensions of the machine ca.: 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used () with only approx. 126 spindle hours (spindle on)Furnishing :- MACMOM / INAS CNC universal milling and drilling machine- HEIDENHAIN CNC path control TNC 410 CA workshop-oriented path controls, with Programming in easy-to-understand plain text dialog HEIDENHAIN electr. Remote control with handwheel- Pivoting control panel, to the right of the machine- hydraulic tool clamping (tie bolt DIN69872-A)- Vertical milling head rotating on both sides - ISO 40- Vertical speed ...

x-travel: 720 mmy-travel: 220 mmz-travel: 450 mmtable surface area: 1000x310 mmweight of the machine ca.: 1.500 kgdimensions of the machine ca.: 2000x1200x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mmy-travel: 600 mmz-travel: 455 mmControl: Dialog 11 total power requirement: 7,5 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4 x 3,5 x 2,5 mNo. 4430Universal tool milling machineWorking area: 710 x 600 x 455 mmDrive: 7.5Control: Dialog-11 controlSpindle holder SK 40Speed range up to 6,300Fixed tableCabinCoolant containerSpace requirement see data sheetWeight approx. 5 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,5 x 2 x 2 mNr. 3287Universal tool milling machine DECKEL FP 1Working area: 300 x 160 x 340Control: Active digital displayDrive: 1.5 kWSpeed range 2000 rpmTool holder SK-40Rigid angled table 210 x 600 mmDocumentationOptional / available on request:- Universal table- counter holder- Rotary table Ø 380mm- Dividing headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtotal power requirement: 2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,5 x 2 x 2 mNo. 3934Universal tool milling machine DECKEL FP 1Working area: 300 x 160 x 340Control: Active digital displayDrive: 1.5Tool holder SK 40Speed range 2000 rpmRigid tableDocumentationOn request / optionally available:-Universal table / fixed table- Hydraulic machine vice- Tool cabinet- Rotary table Ø 380 mm-Cutting attachment-Collets and arborsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 315 mmy-travel: 180 mmz-travel: 320 mmtaper in main spindle: ISO 40 table surface area: 600 x 250 mmT-slots: 5 Stk.turning speeds: 45.0 - 1950 U/minfeed stepless: 10 - 170 mm/minvoltage: 400 Vtotal power requirement: 5.1 kWweight of the machine ca.: 1300 kgrange L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained ()Features:- Robust electric motor universal milling machine- HEIDENHAIN 3-axis digital display- Rotatable universal milling head (right/left = 90°)- Manual milling spindle feed, with lock- Stable T-slot clamping table- Axis feed with rapid traverse in Y-axis Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis- Control cabinet, installed on the left- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 350 mmz-travel: 380 mmtable-size: 790x360 mmspindle turning speed range: 63-4000 U/minspindle taper ISO: 40 quill stroke: 50 mmrange L-W-H: 1600x2000x1850 mmdigital readout: PHILIPS weight of the machine ca.: 1.4 tActive Digital read outMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 220 mmz-travel: 400 mmControl: Dialog 2 total power requirement: 1,6 / 2 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,2 mNo. 5290Universal tool milling machine DECKEL FP 2 NC / 2801Working area: 300 x 220 x 400Drive: 1.6/2 kWControl: Dialog 2 contouring controlFixed table with chip traySpindle SK 40Speed range up to 3150 min-1Quill stroke 65 + 60 mmSpace requirement c.3 x 3.5 mTransport dimensions approx. 2 loading metersWeight approx. 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 135 mmz-travel: 300 mmspindle turning speed range: 100-2000 U/mintable-size: 590x210 mmweight of the machine ca.: 0.6 tDigital read-out 3 axeswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 480/500 mmy-travel: 230/250 mmz-travel: 380/400 mmspeeds: 45 - 2240 U/mintable surface area: 1000 x 250 mmtool taper: SK 40 control: HEIDENHAIN TNC 124 total power requirement: 3 kWweight of the machine ca.: 1550 kgdimensions of the machine ca.: 2600 x 2200 x 1800 mm- horizontal + vertical milling spindle- Cooling device- swiveling table- Chip tray- Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min- Rapid traverse X/Y/Z - axis 4000 mm/min- Control HEIDENHAIN TNC 124- Operating hours: 4764 hours- Machine light- Machine feet- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 150 mmz-travel: 340 mmtable-size: 600x260 mmspindle taper ISO: 40 spindle turning speed range: 40-2000 U/minweight of the machine ca.: 700 kgVisit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 300 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 2392Universal tool milling machineHERMLE UWF 801Working area: 500 x 430 x 400 mmDrive: 3 kWControl: TNC 135With manual control: Working area 520 x 450 x 410 mm,fixed table 800 x 400 mmTool holder SK 4018 spindle speeds from 40 - 2000 1/minFeed stepless x,y 4 - 1600 mm/minz 4 - 1000 mm/minDimensions 2.3 x 2.3 x 1.7 mWeight 1350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Numero macchina: F39455Tensione di esercizio: 400 VTensione di controllo: 230 VFrequenza: 50 HzCorrente nominale: 100 AConnessione: 50 kVAControllo: SIEMENS SINUMERIK 840 CCorsa Asse X: 5000 mmCorsa Asse Y: 1200 mmCorsa Asse Z: 1000mm Traversata rapida: 0 - 10 m/minAlimentazione: 0 - 4 m/minVelocità: da 20 a 2800 giri/min Posizione della testa fresatrice verticale/orizzontale/centrale/orizzontale destra/orizzontale sinistra/orizzontale superioreTesta di fresatura universale particolarmente adatta per la fresatura con posizionamento a 5 pieghe delmandrino Dimensioni del tavolo di fora: 3750 x 1250mm con 9 scanalaturePortautensili: SK 50Dimensioni del tavolo rotante: 1250 x 1250mm con 9 scanalature e un mandrino RÖHM a tre gavabe collegato, diametro: 500mm inclusi grandi quantità di dispositivi di serraggio e un grande lotto di portautensili SK 50, supporti corrispondentiinclusi cambiat ...

x-travel: 800 mmy-travel: 300 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,52,52 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 290 mmtable surface area: 210 x 600 mmtool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1,2 m/minspindle motor: 1,5 / 1,9 kWtotal power requirement: 9,5 kVAweight of the machine ca.: 730 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine comes from a training center.Equipment:3-axis active digital readout made by HeidenhainFixed angle tableCoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 350 mmz-travel: 375 mmdigital readout: AKTIV - Digitalanzeige turning speed range: 63 - 4000 U/minspindle taper ISO: 40 table surface area: 800 360 mmtotal power requirement: 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2 2 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 4000 mmy-axis: 3200 mmz-axis: 1200 mmdistance between columns: 2700 mmspindle motor: 50 / 65 kWspindle turning speed range: 15000 U/mindistance spindle nose and table: 200 - 1400 mmrapid traverse: m/mintable-size: 4020 x 2400 mmworkpiece weight: 15 tControl: Heidenhain TNC 640 total power requirement: - kWweight of the machine ca.: 44 tdimensions of the machine ca.: - mMachine equipped with:X, Y, Z, B, C five axes simultaneous movement control- CNC control Heidenhain TNC 640- 40-position tool changer (HSK-A100)- 2-axis milling head TCH-19F-- B- & C-Axis- X,Y,Z-axis linear scales- IKZ 20bar- Tool off-set- Oil skimmer- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.