fresatrici usati in vendita (2,516)

Matsuura H Plus-300Year of manuf. : 2013 Control : Fanuc 30iM Movement X/Y/Z : 500/560/500 mmTool holder : BT40 ____________Description:Spindle:Speed:15.000 rpmPower:15 kWTorque:119 NmTaper:BT40NC-Roundtable:B-Axis:0,001°Palletsize:300 x 300 mmTableloading (max.):250 kgWorkpiecesize (max.):ø530 x 760 mmIn general:Toolmagazine:71 stationsRapidtravers in X/Y/Z:60 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure, 70 barWorkpiecemeasurement:Touchprobe, Renishaw OMP60Toolbreakagecontrol:MechanicalAutomation:Palletchanger, 2 stationsFurther Accessory:Trafo, rinsing pistol

Inventory number: 29052 -Speed range : 5-5000 rpm -Equipped with NC rotary table -With machine vise, Hilma SM160 For more details, see photos of the manual

SMEC MCV 4600Year of manuf. : 2023 Control : Siemens Sinumerik 828D Speed : 12000 rpmMovement X/Y/Z : 900/460/520 mmTool holder : BT40 ____________Description:General:Year of manufacture:2023Control system:Sinumerik 828DX/Y/Z travel:900/460/520 mmSpeed:12,000 rpmTool holder:BT40Spindle:Technology:Belt spindleSpeed:12,000 rpmPower:18 kWTorque:117 NmRapid traverse X/Y/Z:36/36/30 m/minTool holder:BT40Tool magazine:Technology:Chain magazine (ATC type)Number of stations:30Work table:Clamping surface:1050 x 460 mmTable load capacity:600 kgFeatures/accessories:Chip disposal:Chip conveyorCoolant supply:IKZ systemSetup operation:Electronic handwheelOther:Spray gun

EMCO Emcomill E350Year of manuf. : 2023 Control : Siemens 828D - ShopMill Speed : 10000 rpmMovement X/Y/Z : 350/250/300 mm____________Description:Spindle:Technology:DirectdriveSpeed:10.000 rpmPower (max.):7 kWTorque (max.):41 NmTaper:SK30Workingtable:Clampingsurface:520 x 300 mmTabeloading (max.):100 kgIn general:Toolmagazine:20 StationsRapid travers in X/Y/Z:24 m/minEquipment/Accessory:Positionsensor:Direct Scales in X/YChipmanagement:Chip conveyorCoolingmanagement:Coolant pump with 8 barWorkpiecemeasurement:Touch probe, Marposs WRP 45Toolmeasurement:Probe, Marposs TS304.-Axis:Walter TANI 100 NEG with 3-Jaw chuck and TailstockOilmistseparation:Mechanical extraction, RevenSetup operations:Electronic HandwheelFurther Equipment:Rinsing pistolFurther Accessory:Misc. used Toolholders

Hurco VMX 64iYear of manuf. : 2016 Control : Hurco MAX5 Speed : 12000 rpmMovement X/Y/Z : 1625/864/762 mm____________Description:Spindle:Technology:Belt-driven spindleSpeed:12.000 rpmPower (max.):18 kWTorque (max.):239 NmTaper:SK40Workingtable:Clamping surface:1.676 x 889 mmTableloading (max.):2.722 kgIn general:Toolmagazine:40 StationsRapid travers in X/Y/Z:18/18/13,5 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internaal cooling unit with filter and High-pressure, 20 barWorkpiecemeasurement:Touchprobe, Renishaw OMP 60Toolmeasurement:Probe, Renishaw TS27RSetup operations:Electronic handwheelFurhter Equipment:Chiller, TrafoFurther Accessory:Misc. toolholder

Inventory number: 24328

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V / 50HZ Power: 1200W,0-150RPM. Tap Range: DIN M6-M30 COLLET: M6-8,M10,M12,M14,M16,M18-20,M22,M24,M30 Machine condition: unchecked. Approx. Transpo ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-156 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30,M33,M36 Machine condition ...

WALDRICH-COBURG MC 2500 MC 2500 FT-M3/NC Gantry Milling Machine with Interchangeable Table Highlights • Sinumerik 840D • Various interchangeable heads (including Nutator milling head with HF spindle) • Extremely stable and high-quality mechanical engineering • Shuttle table system for uninterrupted work • Suitable for demanding tool and mould making Machine Details • Serial number: 3.8009 • Control: SIEMENS Sinumerik 840D Workroom • Plate panel clamping area: 3,500 x 2,000 mm • Table load per table max.: 20 t • Passage between the uprights: 2,500 mm • Passage from plate field to milling spindle end face max.: 1,900 mm Travels and feeds • X-axis travel: 3,750 mm • X-axis feed range: 0 - 10,000 mm/min • Y-axis travel: 2,600 and 1,1750 mm per side (total 4,350 mm incl. head change) • Y-axis feed range: 0 - 10,000 mm/min • Z-axis slider adjustment: 1,250 m ...

Machine number: 2820-1193Control: GRUNDIG DIALOG 11Table dimensions: 720 x 460 mmwith 7 grooves, tool holder: SK 40Travel X-axis: approx. 400 mmTravel Y-axis: approx. 400 mmTravel Z-axis: approx. 400 mmincl. pallet with matching machine accessories

Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, beveled -Slot width: 25 mm -Dimensions: 320/65/H40 mm -Weight: 3.8 kg

Hermle U 630 S Machine Type: CNC Universal Milling Machine / Vertical Machining Center Manufacturer: Hermle AG, Gosheim, Germany Model: U 630 S Year of Make: 2002 Serial Number: 15224 Control: Heidenhain TNC 426 Axes: 3-axis (optional 4th axis with rotary table possible) Travel: X = 630 mm Y = 500 mm Z = 450 mm Table size: approx. 800 × 500 mm Max. workpiece weight: approx. 300 kg Spindle: Speed range up to 12,000 rpm Tool holder SK40 or HSK-A63 Drive power approx. 10–15 kW Tool changer: Automatic magazine changer, approx. 20–30 places Cooling: Integrated cooling lubricant system Accuracy: Positioning accuracy ±0.005 mm Repeatability ±0.002 mm Supply: Operating voltage 400 V / 50 Hz Control voltage 24 V Rated current 20 A Connected load 14 kVA Machine weight: approx. 4,500 kg Safety equipment: Emergency stop button Door lock Full cladding for safe operation Construction: C ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx ...

This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine.

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V / 50HZ Power: 600W 0-312RPM TAP RANGE: DIN M3-M16 COLLET: M3, M4, M5, M6-8, M10, M12, M14, M16 Machine condition: unchecked. Approx. Transport di ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-156 r/min. TAP RANGE:DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30,M33,M36 Machine condition: ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V / 50HZ Power: 1200W,0-150RPM. Tap Range: ISO M6-M30 COLLET: M6-8,M10,M12,M14,M16,M18-20,M22,M24,M30 Machine condition: unchecked. Approx. Transpo ...

A horizontal boring and milling machine is offered: Control: Siemens Sinumerik 840 D, travel X/Y/Z: 2500mm/200mm/250mm, table clamping surface: special form length corresponding to X travel, tool holder: SK50 (DIN 2079), spindle speed: 40-2000rpm, dimensions X/Y: approx. 6400mm/2500mm, total weight: 7000kg. Inspection possible by appointment.

Table dimensions: 800 x 300 mmwith three grooves and an attached rotary tableJaw width: 200 mmplus a 2-axis digital display

Per profili in alluminio e PVC Diametro massimo del taglio: 250 mm Lunghezza massima di fresatura: 250 mm Profondità massima di fresatura: 95 mm Altezza massima del profilo: 115 mm Corsa: 350 mm Tenditori pneumatici di materiali Alimentazione manuale Quantità minima di spruzzatura Peso: circa 200 kg

x-travel: 2400 mmy-travel: 1500 mmz-travel: 810 mmControl: Heidenhain iTNC530 total power requirement: kWweight of the machine ca.: 7.8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Anno di costruzione 2012 Siemens Control 840D Diagnostica remota e teleservizio Istruzioni di manutenzione sullo schermo Pacchetto fresatore a 5 assi Tavolo rigido con tavolo rotante integrato Kessler DTE 520 velocità massima 1000 giri/min Escursa X/Y/Z 2000/685/630 mm Testa girevole NC con paletta Asse ruotatore NC +- 100 - sistema di misurazione diretta Intervallo di velocità 20.000 giri/min Sistemi di misurazione dello spostamento diretto Cambiatore di attrezzi con 92 posti Traversata rapida 40 - 40 - 40 m/min Accelerazione dell'asse 0,25 g Nastro trasportatore a trucioli (nastro a cerniera) Sistema di raffreddamento HL 450 / 900 (IKZ) Pistola a scheggiature Unità di raffreddamento del liquido di raffreddamento Scarico aggiuntivo della vasca Preparazione della macchina per l'aria attraverso il perno Estrazione per l'area di lavoro Pacchetto di sicurezza MILL 20 ...

È offerta una fresatrice MAHO con controllo Heidenhain TNC 121, tavolo X/Y 1000mm/600mm, portautensili SK40, 3526h. È disponibile il manuale operativo. L'ispezione è possibile su appuntamento.

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsSpeed range 20 - 15000 rpmTorque (40% DC) 121 NmTorque (100% DC) 84 NmDrive power (40% DC) 20,3 kWDrive power (100% DC) 14,5 kWSpindle taper SK40 Tool holder DIN ISO 7388-1-AClamping System DIN ISO 7388-3-A, ADToolchanger with set up station for tool loadingNumber of tools 30NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformat ...

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Adjustment: SK50 -Tool holder: M20 -Price: for both recordings -Weight: 16 kg

GeneralUniversal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal800 mmCross1050 mmVertical850 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minTool changerApplicationUniversal Tool changer planehorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools123 Coolant supply ICSCoolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoreticChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm  ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque64 NmTorque (100% DC)43 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mTropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWSpeed max.12000 rpmDrive power (100% DC)9 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque64 NmTorque (100% DC)43 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmWeight approx.5600 KgTropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel