fresatrici usati in vendita (2,488)

This 3-axis Röders TEC RHP 500 was manufactured in 2006. It features a high spindle speed of 42,000 rpm and a tool magazine capacity of 42 slots. The machine is equipped with hydrostatic X, Y & Z axes and includes a coordinate grinding package. If you are looking to get high-quality machining capabilities, consider the Röders TEC RHP 500 vertical machining centre we have for sale. Contact us for further details.

Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping devices, clamps, clamping tools, step clamps, low clamps, clamping irons, power clamps, low clamps, compact clamps, machine table clamps -Manufacturer: Lenzkes, Low-pressure clamping compact clamping clamp Monobloc clamping jaw -Type: M14-16-L -Quantity: 1x tensioner available -Dimensions: 140/60/H90 mm -Weight: 2 kg

Key data: 630 mm, 500 mm, 500 mm

Controllo: Nome: Heidenhain Dati tecnici: • Mandrino: 20-7000 giri/min • Tabella: 900 mm x 528 mm • Interfaccia SK40 • Quill • Semi-cabina La vendita precedente è riservata. Non si assume alcuna responsabilità per le informazioni tecniche qui fornite. Si applicano le disposizioni legali.

Centro di Lavorazione CNC HURON VX8 – Anno 2015 In vendita è un centro di lavorazione verticale CNC HURON VX8, costruito nel 2015, con controllo Heidenhain TNC 620. La macchina è in ottime condizioni generali, è stata testata in officina ed è energizzata. Con una velocità del mandrino fino a 12.000 giri/min, un cambiatore utensile a 24 volte e un'ampia gamma di accessori, la macchina offre attrezzature solide per operazioni di fresatura impegnative. Dati tecnici Produttore: HURON Modello: VX8 Anno di produzione: 2015 Controllo: Heidenhain TNC 620 Ore motore ACCESE: 22.873 h Durata del programma: 6.968 h Corsa X: circa 820 mm Escursa Y: circa 510 mm Escursa Z: circa 510 mm Traversata rapida: circa 24 m/min Superficie utilizzabile del tavolo: circa 1.000 × 530 mm Carico consentito al tavolo: circa 500 kg Velocità del mandrino: fino a 12.000 giri/m ...

This 3-axis Hurco VMX 42 was manufactured in 2006. It features a tool tray with 24 positions, a chip conveyor, and a coolant tank with pump. Operating hours total 22,612.4, with spindle hours at 6,344.2. Consider the opportunity to buy this Hurco VMX 42 vertical machining centre. Contact us for more information.

This 3-axis DECKEL MAHO DMU 60 E was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine is equipped with a 25-fold tool changer and a manually swivelable milling head, providing versatility for various machining tasks. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 60 E vertical machining centre we have for sale. Contact us for further details.

This 4-axis DOOSAN DNM650 was manufactured in 2010. It features a robust weight of 8500 kg and is equipped with a Fanuc Series control system. The machine includes a 4th axis rotary table unit mounted on the main table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM650 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HERMLE UWF 1202 H was manufactured in 1994. It features an automatic tool changer and a robust net weight of 5,700 kg. The machine is equipped with a HEIDENHAIN CNC control and an enclosed linear encoder with a measuring length of 620 mm. If you are looking to get high-quality universal machining capabilities, consider the HERMLE UWF 1202 H machine we have for sale. Contact us for further details.

This 3-axis HERMLE UWF 802 M was manufactured in 1995. It has a total power rating of 6 kVA and operates at a voltage of 400 V. With a net weight of 1800 kg, this universal machining centre is designed for versatility in various machining applications. If you are looking to get high-quality machining capabilities, consider the HERMLE UWF 802 M machine we have for sale. Contact us for further details.

GeneralUniversal Milling Machine; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Benefit PackageBenefit Package consisting of: Swarf conveyor, with cleaned slot screen Internal coolant supply 40bar/600l Air blast through spindle centre Application Tuning Cycle 3D quickSET (pre selection, measuring probe) Spindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp  ...

GeneralVertical Machining Center; Control: Control M730UM with CELOS CharacteristicsTable surface1350 x 600 mmMaximum load (table centre)1200 KgSpeed max.12000 rpmDrive power (100% DC)22 kWDrive power (25% DC)37 kWTool Magazine with30 PositionsSpindle taperBT 40 Movement X / Y / Z1050/530/510 mmRapid feed X / Y / Z30/30/30 m/minDimensions (L x W x H)3,02 x 2,98 x 2,61 mWeight approx.7000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p High-torque spindle 12,000min-1, 37/ 22 kW (#40)High-torque Spindle 12,000 min-1, 37/22 kW (#40) Motor spindle powerMASTER® Spindle speed: 12,000 min-1 Output: 37/22 kW (50/30 HP) (10%ED/cont) Torque: 360/177 Nm (265.52/ ...

GeneralHorizontal machining center; Control: Siemens S840Dsl with CELOS CharacteristicsSpeed max.-20000 rpmDrive power (100% DC)25 kWDrive power (40% DC)42 kWTable size400x400 mmSwivelling range360x1 degreeMaximum load (table centre)400 KgMax. work piece diameter630 mmMax. work piece height900 mmPalett changer with2 PalletMovement X / Y / Z560/560/660 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperHSK-A 63 Max. tool length450 mmDimensions (L x W x H)2,68 x 4,19 x 2,54 mWeight approx.8500 KgPreparation for Center Through-spindle coolant systemCenter Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining point and prolonging a tool life. Spindle Taper HSK-A63Spindle Taper HSK-A63 This specification u ...

GeneralHorizontal machining center; Control: Siemens S840Dsl with CELOS CharacteristicsSpeed max.-15000 rpmDrive power (100% DC)30 kWDrive power (40% DC)46 kWTable size400x400 mmSwivelling range360x1 degreeMaximum load (table centre)400 KgMax. work piece diameter630 mmMax. work piece height900 mmPalett changer with2 PalletMovement X / Y / Z560/560/660 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperHSK-A 63 Max. tool length450 mmDimensions (L x W x H)2,68 x 4,19 x 2,54 mWeight approx.8500 KgHigh-torque spindle 46 /30 kW, 15,000 min-1High-torque spindle 46 /30 kW, 15,000 min-1 (SIEMENS) Preparation for Center Through-spindle coolant systemCenter Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining po ...

GeneralHorizontal machining center Chip conveyor (ejection to the rear) Coolant gun for setup station side Oil skimmer Sludge collecting function inside coolant tank In-machine measuring system (spindle) touch sensor (Renishaw OMP60) + workpiece setter Tool breakage detection system Manual pulse generator (separate type) Full closed loop control (Scale feedback); Control: Control F31iB with CELOS CharacteristicsSpeed max.-12000 rpmDrive power (100% DC)30 kWTable size630 x 630 mmSwivelling range360 x 1 degreeMaximum load (table centre)1500 KgMax. work piece diameter1050 mmMax. work piece height1300 mmPalett changer with2 PalletMovement X / Y / Z1050/900/1030 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperBT 50 Weight approx.18750 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with  ...

GeneralHorizontal machining center Chip conveyor (ejection to the rear) Coolant gun for setup station side Oil skimmer Sludge collecting function inside coolant tank In-machine measuring system (spindle) touch sensor (Renishaw OMP60) + workpiece setter Tool breakage detection system Manual pulse generator (separate type) Full closed loop control (Scale feedback); Control: Control F31iB with CELOS CharacteristicsSpeed max.-12000 rpmDrive power (100% DC)30 kWTable size630 x 630 mmSwivelling range360 x 1 degreeMaximum load (table centre)1500 KgMax. work piece diameter1050 mmMax. work piece height1300 mmPalett changer with2 PalletMovement X / Y / Z1050/900/1030 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with120 PositionsSpindle taperHSK-A 100 Weight approx.18750 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control  ...

KEKEISEN PFW-T 4000/12 portal milling machine in a heavy, rigid design for machining large and heavy workpieces.Travel paths of 4,000 x 2,700 x 1,200 mmand a large worktable of approximately 4,000 x 1,800 mmwith a table load capacity of 10,000 kg enable the machining of large-volume components.The machine is equipped with a universal milling head with 2 swivel axes and 5 - 1 degree steps NC controlled - adjustable positions (manually or optionally NC-controlled).Hirth gearing ensures precise angle settings.Powerful main spindle drive with approximately 30 kW.Speed range 20 – 7,000 rpm, maximum torque of approximately 1050 Nm.Additional equipment includes a 60-tool changer (KWE60),Chip conveyor, KNOLL filtration system, Hydac cooling units, and central lubrication.Feed rate up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approximately 30,000 N per axis underscore the r ...

A Belotti 5-axis CNC gantry milling machine is offered. Travels X/Y/Z: 12000mm/3000mm/2000mm, C-axis: +/-200°, A-axis: +/-115°, milling head: Cytec, spindle power: 20kW, torque: 48Nm in S1, max. spindle speed: 24000rpm, control: Siemens 840D. Documentation available. Inspection possible by arrangement.

This 3-axis FEHLMANN PICOMAX 80 CNC-W 2/3 was manufactured in 2005. It features a spindle speed range of 50 - 9,200 rpm and a maximum torque of 80 Nm. The machine offers a travel of 700 x 315 mm in the X and Y axes, with a vertical adjustment of 495 mm. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 80 CNC-W 2/3 vertical machining centre we have for sale. Contact us for further details.

Controllo Heidenhain TNC 124 Escursa X/Y/Z: 500 x 400 x 400 mm Velocità del mandrino 4.500 min-1 Portautensili SK 40 Tavolo rotante manuale con asse girevole 700 x 500 mm

Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: IROX, compact clamps -Type: Tension fix -Quantity: 1x tensioner available -Dimensions: 150/45/H110 mm -Weight: 1.8 kg

Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: IROX, compact clamps with clamping element extension -Type: Tension fix / Stage 1 -Quantity: 1x tensioner available -Dimensions: 150/45/H170 mm -Weight: 2.4 kg

Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Lenzkes, Compact Clamp Monobloc -Type: L20 220-10 -Quantity: 1x tensioner available -Dimensions: 220/50/H90 mm -Weight: 2.2 kg

In vendita è una fresatrice per tacche revisionata in officina del rinomato produttore Elumatec, tipo AF223, costruita nel 1998. Come parte della revisione in officina, la macchina fu smontata, pulita e riassemblata. Fu quasi completamente riverniciata. I cuscinetti del mandrino e del motore furono sostituiti. La lastra fu levigata e zincata professionalmente. Altre parti zincate furono anch'esse in gran parte ri-zincate. Sono state installate le seguenti nuove parti: - Cilindri pneumatici - Guida e strati lineari - Cilindri di serraggio e tamponi in gomma - Copertura protettiva - Coperchio incernierato - Guardafango - Cursori protettivi a destra e sinistra - Scorrimento protettivo sul lato con spazzola - Leva all'arresto - Leva sul mandrino anteriore - Cuscinetti sul mandrino - Tubo protettivo - Scala sulla piastra - Scala al stop - Regolatore - Oiler - Parti  ...

Frenatura universale CNC HERMLE U 630 T Con controllo della pista Heidenhain TNC 426 Anno di produzione: 1998 Viaggio: X 630 (875) Y 500 Z 500 Intervallo di velocità: 20 – 7.000 giri/min variabile all'infinito Con i seguenti accessori: Tavolo rigido ad angolo 900 mm x 528 mm superficie di serraggio Cambiautenze verticale con 16 posizioni del caricatore Abitacolo con protezione totale con porte scorrevoli e illuminazione interna Volante elettronico Sonda 3D Heidenhain Configurazione del liquido di raffreddamento 4 M regolabile in altezza

FOOKE ENDURA 83.1 Frenatura a portale La FOOKE ENDURA 83.1 è una fresatrice CNC a 5 assi con tre assi lineari X, Y, Z e due assi rotanti A e C. La superficie di serraggio è composta da due tavoli per macchine di 3.200 mm x 1.000 mm ciascuno. Un'ulteriore unità di mandrino nuovissima del produttore, SPL, è inclusa nell'ambito di consegna. Anno di costruzione: 2003 Control SIEMENS SINUMERIK 840D Escursa X - 3.500 mm / Y - 2.500 mm / Z - 1.200 mm / A - ± 120 / C - 365 Traversata rapida sugli assi X/Y/Z fino a 20 m/min Velocità di rotazione sull'asse dell'aria condizionata fino a 15 giri/min Attrezzatura: Il mandrino HSK 63A produce SPL, tipo/DRF-FO-180M-W-16-34 con 34 kW fino a 16.000 giri/min. Cambiautezzi per 20 utensili / diametro fino a 100 mm Raffreddamento interno IKZ fino a 30 bar Raffreddamento del mandrino Sistema di filtro a cinghia di carta KNOLL  ...

Tipo di macchina: Frenatura Produttore: Hermle Tipo: FW 801 Condizione: usato L'offerta sarà inviata solo se viene fornita un'impronta completa! Prezzo 3.450 euro inclusi il 19% di IVA Posizione Warstein, Germania Numero di riferimento M-LEI-1026 DESCRIZIONE Ti offriamo una fresatrice usata del produttore Hermle. Inclusa la morsa per macchina, Cuscinetto contrario per fresatura orizzontale e testa tagliatrice montata. Disponibilità: immediatamente La nostra offerta è rivolta agli artigiani registrati ai sensi della Trade Regulation Act secondo la sezione 14 GewO. L'offerta è soggetta a modifiche, soggetta a una vendita precedente. Si prega di fornire i tuoi dati di contatto completi per ricevere un'offerta secondo i nostri termini e condizioni di pagamento. Gli errori nelle descrizioni e nelle offerte sono riservati

Control: Heidenhain TNC 355, weight: approx. 3.5t, operating hours: 24,197h, with accessories, the machine requires repairs and maintenance. An on-site inspection is possible.

Control: Heidenhain TNC 355, operating hours: 69,557h, with accessories. An on-site inspection is possible.

Electrical power: 7kW, operating voltage: 380V, frequency: 50Hz, control voltage: 220V, current: 35A, control: Heidenhain. An on-site inspection is possible.

GeneralTraveling column machine; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal2000 mmCross800 mmVertical850 mmTool changerType of magazineChain Number of tools40 Max. tool weight8 KgMax. tool length400 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSwivelhead, B-axisControlled NC swivel milling head 15,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12 Drive power (100% DC) 16 kWDrive power (40% DC) 21 kWTorque (100% DC) 85 NmTorque (40% DC) 111 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool hol ...