fresatrici usati in vendita

x-travel: 480/500 mmy-travel: 230/250 mmz-travel: 380/400 mmspeeds: 45 - 2240 U/mintable surface area: 1000 x 250 mmtool taper: SK 40 control: HEIDENHAIN TNC 124 total power requirement: 3 kWweight of the machine ca.: 1550 kgdimensions of the machine ca.: 2600 x 2200 x 1800 mm- horizontal + vertical milling spindle- Cooling device- swiveling table- Chip tray- Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min- Rapid traverse X/Y/Z - axis 4000 mm/min- Control HEIDENHAIN TNC 124- Operating hours: 4764 hours- Machine light- Machine feet- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-corsa: 410 mmy-corsa: 310 mmz-corsa: 400 mmcono utensile: ISO 40 gamma di velocità di tornitura del mandrino: 40 - 2000 U/mindimensioni della tavola: 700 x 280 mmsuperficie: 830 x 224 mmpotenza totale richiesta: 2,2 kWdimensioni della macchina ca.: 1,4 x 2,1 x 2,0 mControllo: Heidenhain TNC 145

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: Heidenhain TNC 113 total power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5152Universal tool milling machineDeckel FP 4 M (K) - 2203Working area: 500 x 400 x 400Drive: 4 kWSpindle holder SK 40 / DIN-2080Speed range 50 - 2,500 min-1Feed rates 8-630 mm/min steplessRapid traverse 1.3 m/minFixed table 800 x 460 mmChip trayHeidenhain TNC 113 Active Digital readoutSpace requirement approx. 2 x 2 x 2mWeight approx. 1,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 200 mmz-travel: 400 mmtotal power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 5032Universal tool milling machineDECKEL FP 2 activeWorking area: 400 x 220 x 400Drive: 2 kWControl: 3-axis active digital display HeidenhainFixed table 700 x 330 mmFolding splash guard cover with chip trayMachine feetdocumentationSpindle holder SK 40 / M 16Speed range 25 - 2,500 min-1Space requirement approx. 2.5 x 1.8 x 1.8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 380 mmz-travel: 350 mmspeeds: 20 - 5000 U/mintable surface area: 800 x 355 mmtool taper: SK 40 control: HEIDENHAIN TNC 124 total power requirement: 6,0 kWweight of the machine ca.: 1800 kgdimensions of the machine ca.: 2210 x 2680 x 1965 mm- horizontal + vertical milling spindle- Cooling device- swiveling table- Chip tray- Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min- Rapid traverse X/Y/Z - axis 4000 mm/min- Control HEIDENHAIN TNC 124- Operating hours: 4764 hours- Machine light- Machine feet- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 450 mmz-travel: 500 mmControl: CNC 332 / TNC 355 total power requirement: 5,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: ca. 3 x 3 x 2,5 mNo. 2213Universal tool milling machine MAHO MH 800 TWorking area: 800 x 450 x 500(800 longitudinal / 450 vertical / 500 transverse)Drive: 5.5 kWControl: Heidenhain CNC 332 / TNC 355Universal built-in rotary tableCoolant deviceChip traySplash guard half cabin, tool clampTechnical documentationTool holder ISO 40,Table clamping surface 600 x 900 m, max. table load 500 kg,quill stroke 80 mmSpeed range 63 - 3150 rpmFeed rate 1 - 1500 mm/minRapid traverse: 4.5 m/minWeight: approx. 4 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5124Universal tool milling machineDECKEL FP 4MWorking area: 500 x 400 x 400Drive: 4 kWControl: 3-axis digital display HeidenhainSpindle holder SK 40 / M16Speed range 50-2500 min-1Feed rates 8-630 mm/minRapid traverse 1.3 m/minFixed table 800 x 460 mmChip traydocumentationSpace requirement approx. 2 x 2 x 2 mWeight approx. 1500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corsa x: 300 mmCorsa Y: 300 mmCorsa Z: 400 mmControllo: Dialog / Contour 3 potenza totale richiesta: 4 kWpeso della macchina ca.: 1,5 tdimensioni della macchina ca.: 232 mPrezzo del pacchetto: 3 x camion libero DECKEL FP 2 EXWCodice prodotto:5267 FP 2 A Contour 35268 FP 2 A Contour 35290 FP 2 NC Dialogue 2

x-travel: 2000 mmy-travel: 920 mmz-travel: 900 mmtable surface area: 2200 x 750 mmtable load: 3 tnumber of T-slots: 6 T - slots - width: 18 mmT - slots distance: 120 mmspindle taper: ISO 50 DIN 69871-B spindle speed max.: 3000 U/mintransmission ratio: 1 speeds infinitely variable range 1: 60 - 3000 U/minweight of the machine ca.: 21,6 tfeeds longditudinal/cross/vertical: 0 - 5000 mm/minrapid traverse: 15000 mm/mintotal power requirement: 38 kwweight of the machine ca.: 11 tPull studs DIN69872-B | IKZHours:Control on: 43036 hMachine on: 41311 hProgram run 13894 hThe machine is already dismantled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corsa X: 500 mmCorsa Y: 400 mmCorsa Z: 400 mmPotenza totale richiesta: 4 kWPeso della macchina ca.: 1,8 tDimensioni della macchina ca.: 222 m1 x UWF 700 Digi3 x UWF 801 TNC 135 + 1241 x UWF 802 MDa liquidazione a magazzino, parzialmente non funzionante / necessita di riparazionePrezzo VHS / contro offerta

x-travel: 700 mmy-travel: 370 mmz-travel: 350 mmtotal power requirement: 5,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mVertical milling machineSpindle ISO-40, Speed range 48-2100 1/min,feeds 10-1000 mm/min, rapid traverseSpace requirement approx. 2.5 x 2.5 m, Weight approx. 2.5 tonnes.Active digital readout Heidenhain TNC-114Table clamping surface 1000 x 400 mm,Coolant device.Working area: 700 x 370 x 350Drive: 4/5.5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mmy-travel: 800 mmz-travel: 800 mmControl: CNC 432 total power requirement: 22 kWweight of the machine ca.: 17 tdimensions of the machine ca.: 5 x 3,70 x 3 mNr. 2754 Universal bed milling machine MAHO MH 1600 SSpindle SK-50,Speed range up to 4000 min-1Max. workpiece weight 3000kg35,000 switch-on hours,10,0 0spindle hours,Dimensions 5 x 3.70 x 3 m,Weight 16 tonnes.Automatic swivelling milling head,Fixed table 1800 x 980 mm,36-fold universal tool changer,Internal coolant supply with paper belt filter,chip conveyor, manual control bar.Working area: 1600 x 800 x 800Drive: 22 kWControl: Philips CNC 432The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

corsa x: 1200 mmcorsa y: 400 mmcorsa z: 400 mmpotenza totale richiesta: 5 kWpeso della macchina ca.: 2,5 tdimensioni della macchina ca.: 3 x 2 x 2 mn. 4427fresatrice universale per utensili DECKEL FP 4 L / 2707Area di lavoro: 1200 x 400Tavolaad angolo fisso Controllo: displaydigitale a 3 assi Peso circa 3,5 tonnellateIngombro 3 x 2 x 2 m

x-travel: 700 mmy-travel: 500 mmz-travel: 500 mmControl: CNC 432 total power requirement: 10 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 3 x 3 x 2,6 mNo. 0052Universal tool milling machine MAHO MH 700 CWorking area: 700 x 500 x 450Drive: 10 kWControl: Philips CNC-432Fixed tableFully protected cabin with 3 sliding doorsTool holder: ISO-40.Speeds: 20-3150 min-1Feed rate: 1-3000 mm/min,rapid traverse 6 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2 x 3 x 3 mNo. 1859Universal tool milling machine MAHO MH 800Working area: 700 x 450 x 450Universal built-in rotary table 1050 x 627 mm,quill feed gear 0.02-0.2 mm/revSpindle ISO-40,Speed range 32-1600 1/min,feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min.Cross table movement by hand 225 mm,Table top rotation 360°Table swivels/tiltable +- 30° each.Space requirement approx. 2 x 3 x 3 m,Weight approx. 3.3 tons.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,5 x 2 x 2 mNr. 3287Universal tool milling machine DECKEL FP 1Working area: 300 x 160 x 340Control: Active digital displayDrive: 1.5 kWSpeed range 2000 rpmTool holder SK-40Rigid angled table 210 x 600 mmDocumentationOptional / available on request:- Universal table- counter holder- Rotary table Ø 380mm- Dividing headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 410 mmy-travel: 310 mmz-travel: 400 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 222 mUniversal tool milling machineHERMLE UWF 700Spindle holder SK 40Speed range 40-2000 minSpace requirement approx. 2 x 2 x 2 mWeight approx. 1100 kgFor further data see attached PDFRigid table 700 x 285Horizontal milling machine vertical - milling head enclosed - partially rep. conditionedDocumentationWorking area: approx. 410 x 310 x 400Drive: 2,2Heidenhain digital displayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mmy-travel: 600 mmz-travel: 455 mmControl: Dialog 11 total power requirement: 7,5 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4 x 3,5 x 2,5 mNo. 4430Universal tool milling machineWorking area: 710 x 600 x 455 mmDrive: 7.5Control: Dialog-11 controlSpindle holder SK 40Speed range up to 6,300Fixed tableCabinCoolant containerSpace requirement see data sheetWeight approx. 5 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-corsa: 230 mmy-corsa: 90 mmz-corsa: 110 mmvelocità di tornitura: 12000 U/minpotenza totale richiesta: 0,74 kWpeso della macchina ca.: 120 kgdimensioni della macchina ca.: 600 x 550 x 1300 mmFino ad esaurimento scorte4x cerniere i telai dei pallet sono pieghevoliPeso: circa 9,5 kgper 1200x800x200 mm

x-travel: 300 mmy-travel: 220 mmz-travel: 400 mmControl: Dialog 2 total power requirement: 1,6 / 2 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,2 mNo. 5290Universal tool milling machine DECKEL FP 2 NC / 2801Working area: 300 x 220 x 400Drive: 1.6/2 kWControl: Dialog 2 contouring controlFixed table with chip traySpindle SK 40Speed range up to 3150 min-1Quill stroke 65 + 60 mmSpace requirement c.3 x 3.5 mTransport dimensions approx. 2 loading metersWeight approx. 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 300 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,52,52 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corsa x: 400 - 1600 mmCorsa y: 250 - 800 mmCorsa z: 350 - 800 mmControllo: CNC Peso della macchina ca.: 1,6 - 16 tdimensioni della macchina ca.: - mMAHO - Pacchetto da liquidazione -Prezzo speciale in vendita4 x fresatrice-MAHO MH 400 C - CNC 432-MAHO MH 700 C - CNC 432-MAHO MH 800 T - CNC 332-MAHO MH 1600 S - CNC 432EXW - Ex fabbrica Bensheim / LorschAutocarro gratuito

x-travel: - mmy-travel: - mmz-travel: - mmtotal power requirement: - kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 1,51,52 mNo. 2510Universal milling machine Bridgeport ( type/design )Working area: table 1300 x 305Angle milling head with additional angle milling attachment and separate drive motor.Horizontal spindle MK-4,speed range 26-630 min-1,Angular milling head speed range 225 - 3385 min-1Feed range x/y 8.4-224 mm/min, z 3.1-85 mm/min.Space requirement approx. 1.5 x 1.5 m,Weight approx. 1300 kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: - mmx-travel: 1250 mmy-travel: 630 mmControl: Heidenhain TNC 426 / 430 total power requirement: 48 kWweight of the machine ca.: 12 tdimensions of the machine ca.: ca. 5 x 6 x 4 m mCNC jig boring machine / vertical machining centreoverhauled in 2000Spindle ISO 50,speed range 30-3000 min-1max. torque 522 Nmfeeds 3-2000 mm, rapid traverse 10 m/minmax. distance spindle nose - table surface 725 mmProjection spindle centre - stand 800 mm.Space requirement approx. 5 x 5 m,Weight approx. 12 tonnesThe machine was completely overhauled and modernised in 2000 with digital drives anddrives and Heidenhain controlFixed table 1200 x 71036-fold tool changer,coolant system,the pictured magnetic clamping table is not included in the scope of delivery ! -Working area: 1250 x 630 x 560Drive: 44 kWControl: Heidenhain TNC 426 PBThe data for this ad was created with ModulMWS - the software so ...

max. wheel diameter: 2-45 mmgear width: 250 mmmax. module: 1,5 mmmin. module: 0,5 mmControl: Fanuc 18i-MB total power requirement: kWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 2100 x 1440 x 1700 mThe combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa.CNC control Fanuc 18i-MB (Dialog/ISO)CNC axes =X-axis plunge axisZ-axis longitudinal axisC-axis workpiece spindleB-axis tool spindleV-axis loader axis longitudinalA-axis swivel axis tool spindle head (included as an option)Y-axis shift axis (included as an option)With the following production programs:Worm mil ...

5 assi Asse X 800 mm Asse Y 800 mm Asse Z 600 mm Diametro del cerchio di interferenza 1070 mm Distanza mandrino Fino a 823,5 mm Carico macchina-tavola 1000 kg Corsa rapida massima X/Y/Z a TCP max 75 m/min Interfaccia per utensili da taglio HSK-A63 Potenza mandrino motore a CDF 25% max 50kW Coppia mandrino motore a CDF 25% max 187 Nm Peso della macchina 13000 kg Schema elettrico: 2526-95-64934955 Sistema di filtrazione Resy Modello : 14-P00449-3 Numero di serie : KBF- 452/500 Cambio pallet Erowa Modello RobotEasy Numero di serie ERE1364 Anno 2014 Peso 1300kgs Refrigeratori Hyfra Pedia Modello sigma 7-s

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection,-Cover comes: from a WMW boring mill-for guide inside dimensions: 100 x 725 mm-Extractable: mm-Dimensions: 950/820/H150 mm-Weight: 30 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping, with air connection for easy movement (air cushion) -Support surface: 1645 x 250 / 695 x 310 mm -Wall thickness: 30/35 mm -Dimensions: 1645/310/H695 mm -Weight: 239kg

È disponibile una fresatrice universale per utensili Maho. Corsa X/Y/Z: 300mm/300mm/400mm, corsa cannotto: 60mm, dimensioni tavola X/Y: 390mm/620mm, carico massimo tavola: 250kg, portautensili: SK40, avanzamento: 3600mm/min, corsa rapida: 4000mm/min, controllo: Dialog 11. Documentazione disponibile. È possibile effettuare un'ispezione in loco.

Clamping table, clamping angle, T-slot table, rotary table, circular grinding unit, milling machine table -Attachment for a: TOS universal grinding machine -Table surface: 490 x 190 mm -T grooves: 2 -Clamping table: rotatable, pivotable, movable -Dimensions: 490/190/H290 mm -Weight: 31kg